Members Mark Savannah 1506S-7698BS-48 Owner's manual

1 | P a g e
Assembly Instructions & User’s Manual
for
Savannah Accent Chair
THIS ASSEMBLY MANUAL CONTAINS INPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Item Number: 980297334
Model Number: 1506S-7698BS-48
Customer Assistance (spare/replacement parts): 1-800-379-9773

2 | P a g e
Table of Contents
Quality Statement...............................................................................................................................3
Important Safety Information ...........................................................................................................3
Before Assembly ................................................................................................................................3
Care & Use...........................................................................................................................................3
Product Information...........................................................................................................................4
Components........................................................................................................................................4
Hardware..............................................................................................................................................4
Tools .....................................................................................................................................................5
Step 1....................................................................................................................................................5
Step 2....................................................................................................................................................6
Correct leg position ...........................................................................................................................7
Step 3....................................................................................................................................................8
Warning...................................................................................................................................8
Danger.....................................................................................................................................8
Troubleshooting .................................................................................................................................9
Care & Use Instructions....................................................................................................................9
Technical Data.....................................................................................................................................9
Warranty Information.........................................................................................................................9

3 | P a g e
Quality Statement
Important Safety Information
•Please read all instructions carefully before assembling this product.
•Where applicable, and for your safety, assembly by an adult is strongly
recommended.
•Use only vendor-supplied hardware to assemble this item. Using unauthorized
hardware could jeopardize the structural integrity of the item.
•Hardware may loosen overtime. Periodically check that all connections are tight.
Before Assembly
•Remove all parts and hardware from the box. Place all items on a carpeted or
scratch-free work surface, as this will avoid damaging parts during assembly.
•The shipping box can provide an ideal work surface if none is available.
•Use the components and hardware lists below to identify, inventory and separate
each of the hardware and components included.
•To avoid accidentally discarding small components or hardware, do not dispose
of any packaging or contents of the shipping carton until assembly is complete.
•DO NOT USE power tools unless it is explicitly identified in this manual as
required for use during assembly. Power tools can damage the fasteners,
hardware and/or components.
•Do not fully tighten all fasteners / screws until all parts are in place. Failure to
follow these instructions may cause the fasteners / screws to misalign during
assembly.
Care & Use
•Use a soft, clean cloth that will not scratch the surface when cleaning.
•NOTE: Do not place furniture in direct sunlight and keep furniture at least 60 cm /
2 ft from heat sources to avoid fading.
Need Assistance? Visit us at: samsclub.com/membersmarkhelp

4 | P a g e
Product Information
Dimensions: 29.5” x 38” x 36.5” (74.9cm x 96.5cm x 92.7cm)
Weight Capacity ：Supports up to 300 lbs. (136 kg.)
Components
(A)
Chair
Qty:1
(B)
Front leg
Qty: 2
(C)
Left back leg
Qty: 1
(D)
Right back leg
Qty: 1
(E)
Back cushion
Qty: 1
(F)
Seat cushion
Qty: 1
Hardware
5/16x23/8
Screw (G)
Qty: 8
Spring Washer (H)
Qty: 8
Flat Washer (I)
Qty: 8
Need Assistance? Visit us at: samsclub.com/membersmarkhelp

5 | P a g e
Tools
11/2
Hex Head Wrench (J)
Qty:1
Step 1
Open the non-woven cover ， Remove all parts from the carton and separate them into
part number groups as indicated in the parts list. Place the Chair (A) upside down on a
clean surface. Remove legs from box underneath the chair as shown above.
Need Assistance? Visit us at: samsclub.com/membersmarkhelp




6 | P a g e
Step 2
Insert front legs (B) and back legs (C& D) into the coordinating holes marked on the
base of the chair as shown. Attach legs to chair using screws(G) and washers(H&I).
Tighten all screws securely using hex head wrench (J).
After tightening all screws securely, close the non-woven cover as shown.
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
BB
CD
A
H
G
D
J
J
I

7 | P a g e
CORRECT LEG POSITION
Correct side view Correct back view
Incorrect side view Incorrect side view
Need Assistance? Visit us at: samsclub.com/membersmarkhelp

8 | P a g e
Step 3
Turn the chair upright. Place back cushion (E) and seat cushion (F) on the chair.
Confirm the leg position is correct as shown in the drawing. Chair is now ready for
use.
Warning
•Don't install the front legs(B) and back legs(C&D) upside down.
•Please make sure all screws are tightened securely, otherwise it may affect the
use of the chair.
Danger
Don't drag the chair on the floor.
Need Assistance? Visit us at: samsclub.com/membersmarkhelp



9 | P a g e
Troubleshooting
Problem
Possible Cause
Prevention / Solution
Tilting / Leaning
Surface not level
Place the chair on the level
surface.
Shaking
Screw is not tightened
Check and tighten the screw
Care & Use Instructions
1. Do not stand on the seat cushion.
2. For indoor use only.
3. Please do not expose to direct sunlight.
4. Please do not place this product near sources of excessive heat.
5. Please avoid use of sharp objects on or near this product.

and discolor fabrics.
7. Clean spills/marks immediately, as stains are harder to remove when they are left unattended.
8. For persistent stains and overall cleaning, contact a professional upholstery cleaning company.
Technical Data
NA
Warranty Information
This product component has a 1 year guarantee against defects in material and/or workmanship. If you
have any questions regarding the warranty or spare / replacement parts, please call our toll-free number
1-800-379-9773.
Need Assistance? Visit us at: samsclub.com/membersmarkhelp

10 | P a g e
NOTE: Please consider recycling all applicable packaging material.
Distributed by Sam’s West Inc.
2101 SE Simple Savings Dr.
Bentonville, Arkansas 72716-0745
Made in Vietnam
Need Assistance? Visit us at: samsclub.com/membersmarkhelp