Members Mark Teak Adirondack User manual

11
Assembly Manual
Teak Adirondack
Model Number: TM240303
THIS ASSEMBLY MANUAL CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.

2
Important Safety Information
Please read all instructions carefully before assembling this furniture.
For your safety, assembly by two or more adults is strongly recommended.
Use only vendor-supplied hardware to assemble this item. Using unauthorized
hardware could jeopardize the structural integrity of the item.
Hardware may loosen overtime. Periodically check that all connections are tight.
·
·
·
·
Before Assembly
Remove all parts and hardware from the box. Place all items on a carpeted or
scratch-free work surface, as this will avoid damaging parts during assembly.
The shipping box provides an ideal work surface.
To avoid accidentally discarding small parts or hardware, do not dispose of any
packaging or contents of the shipping carton until assembly is complete.
Use the parts and hardware lists below to identify and separate each of the
pieces included.
The use of power tools for assembly is not recommended. Power tools can
damage the hardware and/or split the wood.
Note: Do not fully tighten all bolts until all parts are in place. Failure to follow
these instructions may cause the bolts to misalign during assembly.
·
·
·
·
·
·
Care and Cleaning
To increase the item lifespan, avoid leaving the furniture in standing water or
indirect contact with wet ground.
·
Cover or move the furniture into covered storage during inclement weather and
during winter months.
·
Clean periodically with soft flannel cloth, slightly dampened with a mild soap
products. Dry thoroughly with soft cloth.
·
solution and warm water. DO NOT use abrasive material, bleach or scouring

3
1" Bolt
Qty: 2 Pcs + 1
Phillips Screwdriver ( not included ).
Tools Needed for Assembly
Hardware
(D)
Need assistance? Visit us at: samsclub.com/membersmarkhelp
Component
A1 ........... Right leg ................... 1 pc
A2 ........... Left leg ...................... 1 pc
B.............. Back support ............ 1 pc
C ............. Seat ........................... 1 pc
A1 A2 BC
Wooden dowel
Qty: 2 Pcs + 1
(H)
1 1/2" Bolt
Qty: 4 Pcs + 1
(E) Washer
Qty: 4 Pcs + 1
(I)
Rubber mallet ( not included
).
1 3/4" Bolt
Qty: 2 Pcs + 1
(F) Spring washer
Qty: 4 Pcs + 1
(J)
Wooden cap
Qty: 4 Pcs + 2
(G)

Make sure all parts are connected and tighten all bolts completely using
screwdriver. Tap in the wooden caps (G) to cover bolts head using rubber mallet.
The Adirondack is now ready for use.
Plug in the wooden dowels (H) onto Seat (C). Then, place
the Seat (C) into legs (A1 & A2). Secure using washer (I),
spring washer (J) and 1 1/2" bolts (E) with screwdriver.
3
Install the back support (B) to the pre assembly from
step 1.
Secure using 1" bolts (D) and 1 3/4" bolts ( (F), position
as shown. Using screwdriver .
G
G
4
Need assistance? Visit us at: samsclub.com/membersmarkhelp
MAINTENANCE
Due to wood's natural characteristics, wood color and grain variations may be present. This is a
symbol of the originality of each unit and gives each finished piece a distinctive look and inherent
charm.
Care Instruction :
Teak wood, when left bare and unsanded, will fade to a natural silver-gray color. This silver-gray
color transformation does not in any way affect the durability of the furniture or the wood itself.
To maintain the smooth finish and golden brown color of your teak furniture, you will need to sand
the furniture regularly or allow to weather to silver-gray. To prolong the period of time needed
between sanding, teak oil may also be applied.
If you choose to apply teak oil, apply every 6 months, or follow the teak oil container directions.
Again, if you choose to maintain the smooth brown finish of your new teak furniture, this method
requires some maintenance for upkeep such as sanding and reapplication of teak oil. Teak oil, along
with sanding, simply maintains the golden brown color.
Staining :
Please note, once you stain your teak, it will not return to the natural golden brown or weathered
silver-gray color without sanding off the stain. Stain is intended to be permanent. If you choose to
stain your furniture after it has turned silver-gray, you must first sand it before applying stain.
Do not leave your teak wood furniture in puddles of water or on wet ground.
Cover your teak wood furniture during winter months or move into covered storage, if in wet
climates.
The manufacturer support protection of the world's forest resources and is diligent is sourcing
legally harvested wood.
Thank you
The manufacturer
5
1
A1
A2
C
E
D
D
BF
F
2
JI
H
FRONT
(E) (I)
1 1/2" Bolt
Qty: 4 Pcs Washer
Qty: 4 Pcs Spring washer
Qty: 4 Pcs
(J) (D) (F)
1" Bolt
Qty: 2 Pcs 1 3/4" Bolt
Qty: 2 Pcs
(G)
(H)
Wooden dowel
Qty: 2 Pcs
Wooden cap
Qty: 4 Pcs