Members Mark GT-12345-AAM Owner's manual

1 | P a g e
Assembly Instructions & User’s Manual
For
Member’s Mark 60” Round Dining Table
Item Number: 990018885
Model Number: GT-12345-AAM
Customer Assistance (spare/replacement parts): 1-888-691-2824
or Email: [email protected]
THIS ASSEMBLY MANUAL CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.

2 | P a g e
Table of Contents
Quality Statement ....................................................................................................................................3
Important Safety Information................................................................................................................3
Before Assembly .....................................................................................................................................3
Care & Use.................................................................................................................................................3
Package Contents ...................................................................................................................................4
Product Information ................................................................................................................................5
Components..............................................................................................................................................5
Hardware....................................................................................................................................................5
Tools ...........................................................................................................................................................5
Step 1 .........................................................................................................................................................6
Step 2 .........................................................................................................................................................7
Warranty Information..............................................................................................................................8

3 | P a g e
Quality Statement
Important Safety Information
Please read all instructions carefully before assembling this product.
Where applicable, and for your safety, assembly by an adult is strongly
recommended.
Use only vendor-supplied hardware to assemble this item. Using unauthorized
hardware could jeopardize the structural integrity of the item.
Hardware may loosen overtime. Periodically check that all connections are tight.
Before Assembly
Remove all parts and hardware from the box. Place all items on a carpeted or
scratch-free work surface, as this will avoid damaging parts during assembly.
The shipping box can provide an ideal work surface if none is available.
Use the components and hardware lists below to identify, inventory and separate
each of the hardware and components included.
To avoid accidentally discarding small components or hardware, do not dispose
of any packaging or contents of the shipping carton until assembly is complete.
DO NOT USE power tools unless it is explicitly identified in this manual as
required for use during assembly. Power tools can damage the fasteners,
hardware and/or components.
Do not fully tighten all fasteners / screws until all parts are in place. Failure to
follow these instructions may cause the fasteners / screws to misalign during
assembly.
Care & Use
Use a soft, clean cloth that will not scratch the surface when cleaning.

4 | P a g e
Package Contents
Component
Description
Quantity
Component
Description
Quantity
A
Table top
1
D
Allen/Hex Head Bolt
M6x25mm
10
B
Table base 1
1
E
M12 Washer
10
C
Table base 2
1
Need Assistance? Visit us at: samsclub.com/membersmarkhelp

5 | P a g e
Product Information
Product Dimensions
Table: φ60” x 29” (φ152.5cm x 73.5cm)
Product Weight Capacity
Table: Supports up to 100 lbs. (45 kg)
Components
(A)
Table top
Qty: 1pc
(B)
Table base 1
Qty: 1pc
(C)
Table base 2
Qty: 1pc
Hardware
(D)
Allen/Hex Head Bolt
M6x25mm
Qty: 10pcs
(E)
M6 Washer
Qty: 10pcs
Tools
(F)
M6 Allen Wrench
Qty: 1pc
Need Assistance? Visit us at: samsclub.com/membersmarkhelp

6 | P a g e
Step 1
(B)
Table base 1
Qty: 1pc
(C)
Table base 2
Qty: 1pc
(D)
Allen/Hex Head Bolt
M6x25mm
Qty: 4pcs
(E)
M6 Washer
Qty: 4pcs
(F)
M6 Allen Wrench
Qty: 1pc
Carefully place the table base 1 (B) upside down on a non-abrasive surface.
Assemble the table base 1 (B) to the table base 2 (C) with M6 bolts (D) and M6 Washer
(E) by using M6 Allen Wrench (F).
Do not tighten the bolts until assembling is completed.
Need Assistance? Visit us at: samsclub.com/membersmarkhelp

7 | P a g e
Step 2
(A)
Table top
Qty: 1pc
(D)
Allen/Hex Head Bolt
M6x25mm
Qty: 6pcs
(E)
M6 Washer
Qty: 6pcs
(F)
M6 Allen Wrench
Qty: 1pc
Carefully place the table top (A) upside down on a non-abrasive surface.
Assemble the table top (A) to table base with M6 bolts (D) and M6 Washer (E) by using
M6 Allen Wrench (F).
Tighten all bolts with M6 Allen Wrench (F) .
Carefully turn the table over. The table is ready for your enjoyment.
Need Assistance? Visit us at: samsclub.com/membersmarkhelp

8 | P a g e
Warranty Information
This product component has a 5 year guarantee against defects in material and/or workmanship. If you
have any questions regarding the warranty or spare / replacement parts, please call our toll-free number
1-888-691-2824 or email us at [email protected]
NOTE: Please consider recycling all applicable packaging material.
Distributed by Sam’s West Inc.
2101 SE Simple Savings Dr.
Bentonville, Arkansas 72716-0745
Made in China
Need Assistance? Visit us at: samsclub.com/membersmarkhelp