Merit Ion Rx User manual

COPYRIGHT©2009MERITINDUSTRIES,INC.
Troubleshooting Information - Removal/Installation of Major Assemblies -
Ion Rx
MegatouchIonTechnicalReferenceManual
ATTENTION:
OBSERVEPRECAUTIONSFORHANDLINGESD-SENSITIVEDEVICES
Removal/Installation of Major Assemblies -
Ion Rx
MotherboardRemoval
1. Turn off and unplug the game.
2. Unlock the game and open it by pulling the rear of the top bezel forward.
3. Lift the motherboard cover and remove it from the Velcro securing it to the inside of the game (see
Figure 1).
FIGURE1-RXMOTHERBOARDCOVER
4. Remove all motherboard connections, noting their positions, and unscrew the motherboard in 4
places, noting the location of the motherboard ground wire (see Figure 2).
5. Carefully slide the motherboard out of the system.
SCREW
LOCATION
(4 PLACES)
LOCATION OF
MOTHERBOARD
GROUND WIRE
FIGURE2-LOCATION OFFOURSCREWSSECURINGRXMOTHERBOARD

COPYRIGHT©2009MERITINDUSTRIES,INC.
ATTENTION:
OBSERVEPRECAUTIONSFORHANDLINGESD-SENSITIVEDEVICES
Removal/Installation of Major Assemblies -
Ion Rx (cont’d)
Troubleshooting Information - Removal/Installation of Major Assemblies -
Ion Rx
MegatouchIonTechnicalReferenceManual
MotherboardInstallation
1. Slide the new motherboard into the system, making sure the screw holes on the motherboard line
up with the mating holes on the bottom of the chassis. Secure the motherboard in place with 4
screws, resecuring the motherboard ground wire in the process (see Figure 2).
2. Restore all motherboard connections.
3. Place the motherboard cover over the top of the motherboard andsecureittotheVelco(seeFigure
1).
4. Press the button on the monitor support arm to release the arm, then close and lock the top bezel.
5. Plug in and turn on the game.