Merit Megatouch Money Shoot User manual

COPYRIGHT©2005MERITINDUSTRIES,INC.
MotherboardRemoval
1. Turn off and unplug the game.
2. Unlock and open the bottom door.
3. Remove the 4 screws securing the electronics box cover. Carefully remove the cover (see
Figure1).
4. Disconnect all connections to the motherboard, as well as any other harnesses that may
interfere with removal of the board.
5. Remove the 6 screws (3 top and 3 bottom) fastening the edge of the motherboard to the inside
of the electronics box (see Figure 2), then carefully lift the motherboard out of the game and
insert the board into an anti-static bag for storage. NOTE: Be sure to read the Motherboard
Handling Precautions before handling the board.
MotherboardInstallation
1. Place the new motherboard in the electronics box and refasten the 6 screws (3 top and 3
bottom) securing it to the inside of the box. See Figure 2.
2. Reconnect all connections to the motherboard, as well as any harnesses that were discon-
nected earlier.
3. Replace the electronics box cover and fasten it with the 4 screws. See Figure 1.
4. Close and lock the bottom door.
5. Plug in and turn on the game.
ATTENTION:
OBSERVEPRECAUTIONSFORHANDLINGELECTROSTATIC DEVICES
Removal/Installation of Major Assemblies -
Megatouch Money Shoot

COPYRIGHT©2005MERITINDUSTRIES,INC.
FIGURE1- CLOSED ELECTRONICSBOX-LOCATEDINBOTTOMOFMONEYSHOOTCABINET
4 SCREWS TO REMOVE
ELECTRONICS BOX COVER
FIGURE2-MOTHERBOARD
6 SCREWS SECURIN
G
MOTHERBOARD
(1 BEHIND WIRES)