METHVEN Ovalo 01-0646 User manual

Methven Australia Pty Ltd
ABN 15 104 813 390
Melbourne, Australia
www.methven.com
www.methven.com
AUG 2010 MA433508
Ovalo 3 Hole Wall Set
Basin 01-0646
Use of this product in non-domestic applications voids warranty.
All pipe work must be thoroughly flushed prior to the installation of the mixer.
NEFA inline filters must be installed on both hot and cold supplies.
IMPORTANT
Please read all of the instructions before installation
Installation Guide
Illustration may not reflect actual product shape.
SPEC 001
Does not apply to Bath Sets
Bath 01-0653
04-9905
Hot 04-9752
Cold 04-9769
(Breech not included)

We recommend that this product is installed by a licensed plumber.
THE METHVEN GUARANTEE
The warranty statement shall apply to all tapware & showers supplied by Methven
For more information visit www.methven.com
THIS WARRANTY ISSUED BY: Methven Australia Pty Ltd, Melbourne Australia
Technical Specifications Installation
Inlet Connections: All 1/2" BSP
Operating Pressure: 150kPa - 500kPa
Operating Temperatures: Recommended hot water supply 50°C,
maximum 70°C. AS 3500 requires all hot
water supplies to any sanitary fitting to be
tempered to 50°C.
Cold Handle
Flange
Headworks
Cold Spindle as Assembled
(blue washer)
Spout Push Fit Adaptor
O Ring Seal
Hot Handle
Hot Spindle as Assembled
Red Washer
Grub Screws
Spout
Locking Nut
Breech Set
(Not Included)