Metos Futura HD 100L User manual

BRATT PAN
FUTURA HD
TYPE: 100,150, 200
Accessories
WATER FILLING, HOSE REEL WITH HAND SHOWER, STRAINER PLATE, REMOTE CONTROL
3756394, 3756283, 3756248
Installation and Operation Manual
Rev.: 1.1 (10.1.2023)

Rev.; 1.1 (10.1.2023)
METOS BRATT PAN Futura HD
2|
Contents
1. General.......................................................................................................................................................3
1.1. Symbols used in the manual .......................................................................................................................3
1.2. Symbols used on the appliance ..................................................................................................................3
1.3. Checking the relationship of the appliance and the manual .......................................................................3
2. Safety..........................................................................................................................................................4
2.1. Safe use of the appliance............................................................................................................................4
2.2. Safety instructions in case of malfunction ...................................................................................................4
2.3. Disposal of the appliance ............................................................................................................................4
3. Functional description..............................................................................................................................4
3.1. Intended use of the appliance .....................................................................................................................4
3.1.1. Use for other purposes................................................................................................................................4
3.2. Operating principle ......................................................................................................................................4
3.3. Accessories.................................................................................................................................................5
4. Operation instructions..............................................................................................................................6
4.1. Before use...................................................................................................................................................6
4.1.1. Preparing the use .......................................................................................................................................6
4.2. Operation ....................................................................................................................................................6
4.2.1. Switching on the bratt pan...........................................................................................................................6
4.2.2. Setting of the frying temperature ................................................................................................................8
4.2.3. Frying temperature......................................................................................................................................8
4.2.4. Tilting...........................................................................................................................................................8
4.2.5. Filling the water (optional) ...........................................................................................................................9
4.3. After use......................................................................................................................................................9
4.3.1. Cleaning ......................................................................................................................................................9
4.3.2. Service ......................................................................................................................................................10
5. Installation ...............................................................................................................................................11
5.1. General...................................................................................................................................................... 11
5.1.1. Operating conditions ................................................................................................................................. 11
5.1.2. Storage...................................................................................................................................................... 11
5.2. Transporting and unpacking the bratt pan................................................................................................. 11
5.3. Positioning the bratt pan............................................................................................................................12
5.3.1. Leveling of the bratt pan............................................................................................................................12
5.4. Connections ..............................................................................................................................................13
5.4.1. Electrical connection .................................................................................................................................14
5.4.2. Water connection (optional) ......................................................................................................................14
5.5. Test-run .....................................................................................................................................................14
6. Troubleshooting ......................................................................................................................................15
6.1. Troubleshooting Futura HD 100 ................................................................................................................15
6.2. Troubleshooting Futura HD 150, Futura HD 200 ......................................................................................16
7. Technicalspecications .........................................................................................................................17

|3
Rev.; 1.1 (10.1.2023)
METOS BRATT PAN Futura HD
1. General
Carefully read the instructions in this manual as they contain important information regarding to proper,
e󰀩cient and safe installation, use and maintenance of the appliance.
Keep this manual in a safe place for eventual use by other operators of the appliance.
The installation of this appliance must be carried out in accordance with the manufacturer’s instructions
and following local regulations. The connection of the appliance to the electric and water supply must be
carried out by qualied persons only.
Persons using this appliance should be specically trained in its operation.
Switch o󰀨 the appliance in case of failure or malfunction. The periodical function checks requested in the
manual must be carried out according to the instructions. Have the appliance serviced by a technically
qualied person authorized by the manufacturer and using original spare parts.
Not complying with the above may put the safety of the appliance in danger.
1.1. Symbols used in the manual
This symbol informs about a situation where a safety risk might be at hand. Given instructions are manda-
tory in order to prevent injury.
This symbol informs about the right way to perform in order to prevent bad results, appliance damage or
hazardous situations.
This symbol informs about recommendations and hints that help to get the best performance out of the
appliance.
1.2. Symbols used on the appliance
This symbol on a part informs about electrical terminals behind the part. The removal of the part must be
carried out by qualied persons only.
1.3. Checking the relationship of the appliance and the manual
The rating plate of the appliance indicates the serial number of the appliance. If the manuals are missing,
it is possible to order new ones from the manufacturer or the local representative. When ordering new
manuals, it is essential to quote the serial number shown on the rating plate.
STOP

Rev.; 1.1 (10.1.2023)
METOS BRATT PAN Futura HD
4|
2. Safety
2.1. Safe use of the appliance
Because the bratt pan is a heated appliance that has hot surfaces during normal use, the following warn-
ings and instructions must be followed to avoid burns:
• During long-time operation the sides of the bowl, the pouring nose and the lid get hot.
• For safe frying, always use heat protective gloves and appropriate accessories.
• Look out for discharging steam when opening the lid, especially when simmering or stewing.
• Do not leave the bratt pan on for long periods totally without supervision.
It is strictly forbidden to use bratt pan as a deep fat fryer.
2.2. Safety instructions in case of malfunction
Switch o󰀨 the appliance if it is damaged or malfunctioning. Contact authorised service personnel using
original spare parts for service of the appliance.
2.3. Disposal of the appliance
The destroying of the appliance when the end of its economical lifetime has been reached must be car-
ried out in accordance with local rules and regulations. Taking care of substances that might be harmful
to the environment, if not properly handled, and utilization of reusable materials is best done by using
professional personnel specializing in recycling.
3. Functional description
3.1. Intended use of the appliance
Futura HD bratt pan is intended for heating, frying and stewing, braising, boiling of food.
3.1.1. Use for other purposes
Use of the appliance for other purposes than stated above is prohibited.
The manufacturer of the appliance takes no responsibility for situations that may occur if warnings and
instructions in this manual are neglected.
3.2. Operating principle
Bratt pan is heated by specially designed heating elements which evenly heat up cooking base. Cook-
ing base is divided into two cooking zones in models Futura HD150 and Futura HD200. Each zone is
controlled individually by own thermostat. Green and yellow pilot lamp is on when corresponding zone
is activated. Yellow pilot light goes o󰀨 when the preset cooking temperature of corresponding zone is
reached. Cooking base of model Futura HD100 has only one cooking zone.
Tilting of bratt pan is actuated by electrical motor. Tilting and returning is controlled by corresponding
push buttons on the control panel.
STOP
STOP

|5
Rev.; 1.1 (10.1.2023)
METOS BRATT PAN Futura HD
3.3. Accessories
Each model of pan may have the following optional accessories (refer to the below picture):
- Cold water lling
Cold water from network is poured into the bowl through the spout built into the lid.
Amount of cold water can be measured by measuring stick which must be xed on the wall of bowl.
Cold water connection G3/4 mail is located on the rear wall of support pillar. Water lling is controlled
via button on the control panel.
- Hose reel with hand shower
Hose reel is built into the support pillar. Hand shower with retractable hose and shut o󰀨 valve is located
on the cover of support lillar.
- Wired remote Control for tilting
Wired remote Control can be used for tilting and returning of the pan bowl instead of doing it via but-
tons on the control panel. Remote control is xed on the front wall of the control pillar.
- Strainer plate
Strainer plate is placed on the top of the bowl and secured on it with grips.
Strainer plate is made from stainless steel.
Futura HD. General view and accessories
Lid
Water lling spout
Measuring stick
Support pillar
Hand shower with
retractable hose
and shut o󰀨 valve
Control panel
Control pillar
Strainer plate
Remote control

Rev.; 1.1 (10.1.2023)
METOS BRATT PAN Futura HD
6|
4. Operation instructions
4.1. Before use
4.1.1. Preparing the use
The frying surface of the bratt pan is protected with a thin layer of grease during storage and transporta-
tion. Before rst-time use the grease must be removed by using hot water and detergent.
After the cleaning, the frying surface must be burned in with salt-free grease. Heat up the pan to 200°C
keeping the lid closed. Burn the grease for 5-10 minutes, let the pan cool down and wipe o󰀨 excessive
grease. Repeat when necessary. Do not use oil for burning. Heated oil would create a tough surface,
which is di󰀩cult to clean. A well greased pan reduces fat consumption in frying and minimizes burning
of foodstu󰀨s.
4.2. Operation
4.2.1. Switching on the bratt pan
Turn mains switch of bratt pan in „I“ position. Main switch is located on rear wall of control pillar.
Further operations with bratt pan are controlled from the operating panel.
Main Switch

|7
Rev.; 1.1 (10.1.2023)
METOS BRATT PAN Futura HD
Operating panel Futura HD 150L, Futura HD 200L
1. EMERGENCY STOP button
2. Temperature adjustment of left cooking zone
3. Temperature adjustment of right cooking zone
4. Yellow signal lamp. Heating of left cooking zone is on
5. Green signal lamp. Left cooking zone is activated
6. Yellow signal lamp. Heating of right cooking zone is on
7. Green signal lamp. Right cooking zone is activated
8. Water lling (optional)
9. Tilting of pan bowl
10. Return of pan bowl
Heating up to the frying temperature takes about 3-8 minutes. When the preset frying temperature is
reached, the yellow pilot light goes o󰀨.
If there are longer interruptions in the electricity distribution, thermostats should be set to the“0”position.
This should be done in order to prevent unexpected start-up of the pan when the electricity distribution
is restored.
Due to the very short preheating time of the bratt pan, energy can be saved by not switching the pan on
until the frying is started. If there is a longer pause during the frying, the bratt pan can be switched o󰀨 or
the temperature can be set to a lower value. Energy can also be saved by keeping the lid closed always
when possible, for instance when simmering or stewing.

Rev.; 1.1 (10.1.2023)
METOS BRATT PAN Futura HD
8|
4.2.2. Setting of the frying temperature
The frying temperature can be changed by turning the thermostat knob to the desired temperature. When
lowering the temperature, some time will be needed for the frying surface to cool down. Increasing of the
temperature turns on the yellow pilot light. The new temperature is reached when the yellow light goes o󰀨.
On the Futura HD 150L and Futura HD 200L model, the frying surface has been divided into two frying
zones that can be controlled separately. This makes it possible to fry two product types requiring di󰀨erent
frying temperatures at the same time. By turning the thermostat to the 0 position, the other zone can be
switched o󰀨 when lower frying capacity is needed.
Futura HD 100L has only one cooking zone.
During long-time use, heat is transferred from one zone to the other. Although one zone would be
switched o󰀨, it gets gradually warm, reaching a temperature that is about half of the temperature of the
heated zone. If so desired, the temperature of this zone can be checked by turning the thermostat knob
to a position where the yellow pilot light goes on.
Max. possible working temperature for this model of bratt is 250°C. It is not possible to set work-
ing temperature over 250°C. The rotating knob of the thermostat will not go over mark “250°C”.
Do not try to apply force to override this mark.
4.2.3. Frying temperature
Guiding temperatures for various products::
Fried eggs 150°С
Omelette 160°С
Fish 170°С
Bacon 150°С
Meat cubes 170°С
Meat balls, depending on size 130°С.....170°С
Hamburgers, Depending on size 130°С.....170°С
Veal llet 170°С
Wiennasteak 170°С
Thin steak of veal 220°С
Broiler, big pieces 150°С
Floured slices of liver 170°С
Chops 170°С
Sausage cubes 130°С.....150°С
Frankfurters 150°С
Fried potatoes 150°С.....170°С
Mushrooms 130°С.....150°С
Onion 140°С
Small pancakes 170°С
4.2.4. Tilting
Before tilting or returning the pan bowl to the working position, check that nothing is in the movement area
or leaning against the moving part of the bratt pan.
Check that lid of bratt pan is in opened position. Tilting is not allowed if the lid is closed.

|9
Rev.; 1.1 (10.1.2023)
METOS BRATT PAN Futura HD
4.2.5. Filling the water (optional)
Filling the cold water is possible when bowl is in horizontal position and lid of bratt pan is opened. Push
and hold button on the operating panel. Wait until required amount of water collected and release
button.
4.3. After use
4.3.1. Cleaning
Burned deposits on the frying surface of the pan form an isolating layer which slows up the frying and
creates poor frying results. A clean frying surface is a must for good-quality results.
180°C about 135°C
The e󰀨ect of burned deposits on the surface temperature: 2 mm of deposits lower the surface
temperature with 24 %. 180°C about 135°C
Tilting via control panel
To tilt bowl at desired angle push and hold button. Release button when bowl has reached
desired position. Tilting will be stopped automatically when bowl has reached max. tilting angle. Tilting is
not allowed if the lid is closed.
To return bowl to working (horizontal) position push and hold button until bowl is stopped in
horizontal position.
Tilting via optional wired remote control
Holding the remote control in hands, push and hold button to tilt bowl at desired angle. Release
button when bowl has reached desired position.
To return bowl to working (horizontal) position push and hold button until bowl is stopped in hori-
zontal position.
Discharging of bowl fully lled by water or liquid product must be carried out with great care to avoid
overow of product besides pouring spout through front part of the bowl. Start tilting by pushing
button and holding it short time than release button to allow product partly to pour out. Repeat such action
few times until steady stream will be established.
When tilting the pan bowl, the heating is switched o󰀨 and will be switched on again when the pan is in
the horizontal position.

Rev.; 1.1 (10.1.2023)
METOS BRATT PAN Futura HD
10 |
Cleaning equipment:
- scraper, hard brush, scouring plate, towel, kitchen paper
Cleaning detergent:
- slightly alkaline detergent (pH 8-10)
Cleaning method:
- scraping, dry, wet, damp
Precleaning:
- Scrape out frying remains and wipe out grease and loose remains with paper. When necessary, pour
hot water into the pan and let soak.
Cleaning:
- The inside of the pan bowl is cleaned with a brush and hot water. Spots are removed with a scouring
plate. Cleaning detergent should be used only for frying surfaces extremely covered with burned de-
posits, because it removes grease from the frying surface.
- Inner and outer surfaces of the lid are cleaned with a brush and cleaning detergent solution.
- The outer surfaces of the pan are cleaned with a brush and cleaning detergent solution and rinsed
with water.
After cleaning:
- The frying surface of the pan is rinsed with hot water, dried by heating up and greased with salt-free
grease. All other surfaces are rinsed and wiped dry.
Water usage on the control panel must be avoided.
Use of a water hose or pressure cleaning jet is strictly forbidden.
In order to remain in good condition, the frying surface must be burned with salt-free
grease when the pan is taken into use for the rst time, and after that at intervals during use. This is
especially necessary in connection with thorough cleaning.
4.3.2. Service
Switch the appliance o󰀨 if it is damaged or is malfunctioning. Contact authorized service personnel using
original spare parts for service of the appliance.
The appliance does not include any user serviceable parts inside. Service must be left to authorized
service personnel
STOP
STOP

|11
Rev.; 1.1 (10.1.2023)
METOS BRATT PAN Futura HD
5. Installation
5.1. General
Please observe the instructions given in this chapter concerning the installation and adjustments that
must be done taking the bratt pan into use. Strict observance of the instructions prevents malfunctions
and damages potentially caused by defective installation.
5.1.1. Operating conditions
The Futura HD bratt pan can be used in a normal, air-conditioned professional kitchen. The room tem-
perature of the installation place must not exceed +40°C and the relative humidity must be less than 80%
(condensation on surfaces not allowed to occur)..
5.1.2. Storage
The Futura HD bratt pan must be stored in a dry place, at a temperature between +10 and +40°C. The
bratt pan should be kept in its transport package during storage.
If the appliance is stored in construction site conditions, special care must be taken not to damage it
through other operations on the site:
• Protect the exterior of the bratt pan from scratches and knocks.
• Protect the bratt pan from construction site dust.
• Protect the bratt pan from sparks produced by welding, grinding and abrasive cutting wheels. These
can later cause rust spots on the stainless steel surface of the appliance.
• If the temperature of the facility in winter conditions is below 0°C, the solenoid valve body and rubber
hoses must be emptied at the same time. Solenoid valve and hoses are located inside support (left) pil-
lar. To get access inside pillar remove side panel by loosen two screws near lower edge of side panel.*
*Requirement valid only for bratt pans with accessories:
- water lling
- hose reel with hand shower..
5.2. Transporting and unpacking the bratt pan
The best way to move bratt pan is to keep it in its own package as long as possible, while it also protects
the pan from outer damage. If it is necessary to unpack the pan, possible lifting must thereafter be done
by using pallet jack.
In order to avoid damage, it is not allowed to use the lid as a workbench during installation.

Rev.; 1.1 (10.1.2023)
METOS BRATT PAN Futura HD
12 |
5.3. Positioning the bratt pan
The installation is started by moving the pan exactly to the right installation spot considering a possible
oor drain. The distances needed are shown in the installation drawing.
5.3.1. Leveling of the bratt pan
The pan is delivered leveled at height 900mm (refer to installation drawing).
If leveling at place is necessary, it is done by turning the adjustable feet. The correct position is checked
by means of bubble level, placed on base of the bowl. Open the lid and check level from the right to the
left. Adjust if necessary, by turning left front foot.
Check level from front to rear. Adjust rear left foot if necessary.
Check position of bowl support screws. It should lay on the support bracket. Adjust if necessary.
Bowl support screw
Support bracket

|13
Rev.; 1.1 (10.1.2023)
METOS BRATT PAN Futura HD
G3/4
When the bratt pan is on the correct location and in a horizontal position, it can be bolted to the oor using
anges on the rear feet.
5.4. Connections
Main switch
Optional cold water connection
Cable gland

Rev.; 1.1 (10.1.2023)
METOS BRATT PAN Futura HD
14 |
5.4.1. Electrical connection
Cable gland for supply cable is located on the bottom of control pillar. Refer to installation drawings for
the size of power supply cable needed. In order to make connection, the side cover of control pillar must
be removed. To remove side cover, loosen two screws that are located near lower edge. Supply cable
should be 1m length from oor level for the purpose to be connected to terminals of main Switch.
In order to make eventual future service easier and to increase safety, a mains switch must be installed
near the appliance. This switch must disconnect the appliance completely from the electrical supply
network.
5.4.2. Water connection (optional)
Connection to cold water supply must be made by pressure resistant hose (not included in delivery) tted
with G ¾ connector. The water connection must be tted with shut-o󰀨 valve and non-return valve (not
included in delivery). Cold water supply pressure must be within 20kPa…80kPa. Rinse the water hose
before making the water connection.
5.5. Test-run
Besides the live electrical parts also look out for possible moving mechanisms inside pillars, if there is a
need for testing the appliance during installation while cover plates are detached.
Make sure that the protective grease has been removed from the frying surface before taking the pan into
use. See “Preparing the use”.
When electrical and water connection are ready turn main switch in “I” position and check the function
of the bratt pan.
Check that:
• Tilting of bowl begins when lid is open and when button held pushed
• Bowl returns in home (horizontal) position when button held pushed
• Water starts to run when lid is opened, bowl is n home position, and button held pushed
• When turning the thermostat knob, both the green and yellow pilot light goes on
• The yellow pilot light goes o󰀨 after a few minutes when the frying surface has reached the set tem-
perature
• The yellow pilot light goes o󰀨 after tilting has started and goes on again when bowl has returned to
home (horizontal) position.
The bratt pan Futura HD 150L and Futura HD 200L are equipped with two safety thermostats. Bratt pan
Futura HD 100L is equipped with one safety thermostat. Safety thermostat prevents bratt pan from over-
heating if main thermostat does not switch o󰀨 heating elements.
After installation of the bratt pan during test-run check the condition of safety thermostat. If after turning
the main thermostat knob at desired temperature green pilot lamp goes on but yellow pilot lamp remains
o󰀨 than safety thermostat need to be reset. Contact an authorized service person to reset safety ther-
mostat.

|15
Rev.; 1.1 (10.1.2023)
METOS BRATT PAN Futura HD
6. Troubleshooting
6.1. Troubleshooting Futura HD 100
MALFUNCTION POSSIBLE REASON WHAT TO DO
The pan does not
heat
The mains switch Q1 is in position 0.* Turn the switch to position I.
The emergency-stop switch S5 is pressed
down*
Release the emergency-stop switch by turning it clock-
wise
One of the fuses F1 or F2, or F3, or F4 is blown* Turn the mains switch to position 0. Change the fuse.
Turn the mains switch to position I.
Pan is not returned to home (horizontal) position
Push and hold button until pan stops in home
position
Thermostat A1 faulty* Contact qualied technical personnel
Safety thermostat S2 has tripped* Contact qualied technical personnel
Transformer T1 is broken/blown* Contact qualied technical personnel
Heating of the pan is
slow
One or few heating elements E burnt* Contact qualied technical personnel
The pan is overheat-
ed
Thermostat S1 and safety thermostat S2 faulty* Contact qualied technical personnel
Pan does not tilt/re-
turn
The mains switch Q1 is in position 0.* Turn the switch to position I.
The emergency-stop switch S5 is pressed
down*
Release the emergency-stop switch by turning it clock-
wise
One of the fuses F1 orF2, or F3, or F4 is blown* Turn the mains switch to position 0. Change the fuse.
Turn the mains switch to position I.
Transformer T1 is broken/blown* Contact qualied technical personnel
Switch S8 or S10 is broken* Contact qualied technical personnel
Tilting control unit faulty* Contact qualied technical personnel
Tilting actuator M1 or M2 faulty* Contact qualied technical personnel
Water lling does not
work
Shut-o󰀨 valve on water supply line outside bpatt
pan is closed
Check shut –o󰀨 valve position. Open if it is closed.
The mains switch Q1 is in position 0.* Turn the switch to position I.
The emergency-stop switch S5 is pressed
down*
Release the emergency-stop switch by turning it clock-
wise
One of the fuses F1 or F2, or F3, or F4 is blown* Turn the mains switch to position 0. Change the fuse.
Turn the mains switch to position I.
Pan is not returned to home (horizontal) position
Push and hold button until pan stops in home
position
Switch S7 (Water lling) is broken* Contact qualied technical personnel
Solenoid valve V1 is broken* Contact qualied technical personnel
*Refer to wiring diagram in chapter 7

Rev.; 1.1 (10.1.2023)
METOS BRATT PAN Futura HD
16 |
MALFUNCTION POSSIBLE REASON WHAT TO DO
The pan does not
heat
The mains switch Q1 is in position 0.* Turn the switch to position I.
The emergency-stop switch S5 is pressed
down*
Release the emergency-stop switch by turning it clock-
wise
One of the fuses F1 or F2, or F3, or F4 is blown* Turn the mains switch to position 0. Change the fuse.
Turn the mains switch to position I.
Transformer T1 is broken/blown* Contact qualied technical personnel
Pan is not returned to home (horizontal) position
Push and hold button until pan stops in home
position
Transformer T1 is broken/blown* Contact qualied technical personnel
Thermostat A1 or A2 faulty* Contact qualied technical personnel
Safety thermostat S3 or S4 has tripped* Contact qualied technical personnel
Heating of the pan is
slow
One or few heating elements E burnt* Contact qualied technical personnel
The pan is overheat-
ed
Thermostat A1 and safety thermostat S3 faulty* Contact qualied technical personnel
Thermostat A2 and safety thermostat S4 faulty* Contact qualied technical personnel
Pan does not tilt/re-
turn
The mains switch Q1 is in position 0.* Turn the switch to position I.
The emergency-stop switch S5 is pressed
down*
Release the emergency-stop switch by turning it clock-
wise
One of the fuses F1 orF2, or F3, or F4 is blown* Turn the mains switch to position 0. Change the fuse.
Turn the mains switch to position I.
Transformer T1 is broken/blown* Contact qualied technical personnel
Switch S8 or S10 is broken* Contact qualied technical personnel
Tilting control unit faulty* Contact qualied technical personnel
Tilting actuator M1 or M2 faulty* Contact qualied technical personnel
Water lling does not
work
Shut-o󰀨 valve on water supply line outside bpatt
pan is closed
Check shut –o󰀨 valve position. Open if it is closed.
The mains switch Q1 is in position 0.* Turn the switch to position I.
The emergency-stop switch S5 is pressed
down*
Release the emergency-stop switch by turning it clock-
wise
One of the fuses F1 or F2, or F3, or F4 is blown* Turn the mains switch to position 0. Change the fuse.
Turn the mains switch to position I.
Pan is not returned to home (horizontal) position
Push and hold button until pan stops in home
position
Switch S8 (Water lling) is broken* Contact qualied technical personnel
Solenoid valve V1 is broken* Contact qualied technical personnel
*Refer to wiring diagram in chapter 7
The appliance does not include any user serviceable parts inside. Service must be left to authorized
service personnel.
When you contact service personnel, give the following information for the unit in question:
• what is the type and model of the unit
• what is the serial number of the unit and the date the unit has been installed
• a short description of the fault, what function is not working
• what happened/was done immediately before the fault occurred
6.2. Troubleshooting Futura HD 150, Futura HD 200

|17
Rev.; 1.1 (10.1.2023)
METOS BRATT PAN Futura HD
7. Technicalspecications
• Voltage codes
• Product codes
• Heating element connection T04466B3
• Heating element connection T04467A3
• Heating element connection T04468A3
• Main and control circuit diagram T05416B3
• Main and control circuit diagram T05417A3
• Main and control circuit diagram T05470B3
• Main and control circuit diagram T05471A3
• Main and control circuit diagram T05472B3
• Main and control circuit diagram T05473A3
• Installation drawing T04513C3
• Installation drawing T04532C3
• Installation drawing T04569C3

Rev.; 1.1 (10.1.2023)
METOS BRATT PAN Futura HD
18 |
Voltage codes
Voltage code Voltage
A3/N/PE~400/230V 50Hz
B~250V 16A 50Hz
C3/N/PE~380/220V 50Hz
D3/PE~200V 50-60Hz
F2/PE 220−240V 50Hz
G3/N/PE~415/240V 50Hz
H3/PE~230V 50Hz
I3/PE~220V 60Hz
J3/PE~380 50Hz
K3/PE~400V 50Hz
L3/PE~415V 50Hz
M3/PE~440V 60Hz
N3/PE~460V 60Hz
O3/PE~480V 60Hz
P1/N/PE~220-240V 50Hz
R2/PE~220-230V 60Hz
Product codes
Type codes Full name Description
100 Futura HD
150 Futura HD
200 Futura HD

|19
Rev.; 1.1 (10.1.2023)
METOS BRATT PAN Futura HD

Rev.; 1.1 (10.1.2023)
METOS BRATT PAN Futura HD
20 |