Metos HOOD 130S User manual

COD.: 3100ES_U
Ed. 00 - 09/2010
HOOD TYPE MACHINE
HOOD 130S
4246460, 4246462, 4246463, 4246464
Instructions for Use and
Maintenance
Istruzioni per l'uso e la
manutenzione
EN
IT
COD.: 3100ES_U
Ed. 00 - 09/2010
APPLICARE ETICHETTA
MATRICOLA
IInstallation and Operation Manual

Thank you for choosing our machine.
Theinstructionsforinstallation,maintenance and use found on the following pages have
been prepared to ensure a long life and perfect operation of your unit.
Please, do follow the instructions carefully.
We have designed and built this machine using the latest innovative technologies. Now
you shall take good care of it.
Your full satisfaction is our greatest reward.

EN
page 25
CONTENTS Page
WARNINGS 27
1. MACHINE DESCRIPTION 29
1.1 Machine Description 29
1.2 Machine features 30
2. OPERATION 31
2.1 Control panel and relative symbols 31
2.2 Machine start-up 31
2.2.1 Start-up 31
2.2.2 Operation 32
2.2.3 Switching OFF 33
2.3 Detergent use 34
2.4 Rinse aid use 34
2.5 Drain pump system (optional) 34
2.6 Regeneration device (optional) 35
WARNINGS 36
3. ECOLOGICAL ASPECTS 37
3.1 Recommendations for optimal use of energy, water and additives 37
4. H.A.C.C.P. AND HYGIENE REGULATIONS 37
5. MAINTENANCE 38
5.1 Routine maintenance 38
 5.2ExtraordinaryMaintenance–byqualiedServicePersonnel 39
6. MACHINE INSTALLATION 40
6.1 Handling 40
6.1.1 Handling the product 40
6.1.2 Storage 40
6.2 Prepare for installation 40
6.2.1 Room features 40
6.2.2 Electrical connection - Characteristics 41
6.2.3 Water supply connection - Characteristics 41
6.2.4 Steam evacuation 41
6.3 Installation 41
6.3.1 Positioning the machine 41
6.3.2 Electrical connection 42
6.3.3 Water connection 42
6.3.4 Start-up 42
7. SIGNALS AND ALARMS 43
8. ENVIRONMENTAL ASPECTS 44
8.1 Packaging 44
8.2 Disposal 44
9. TROUBLESHOOTING 45
READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLING THE
MACHINE.
WARNING:FAILURETOCOMPLY,EVEN PARTIALLY, WITH THE PRESCRIP-
TIONSINTHISMANUALWILLRENDERTHEPRODUCT WARRANTYNULL,
AND THE MANUFACTURER SHALL NOT BE LIABLE.
TRANSLATION OF THE ORIGINAL INSTRUCTION

EN
page 27
WARNINGS
This instruction booklet must be kept with the machine for future consultation. If this ma-
chine is sold or transferred to other users, make sure the booklet always goes with the unit
so that the new owner can have all the necessary information on operations and all relevant
instructions.
The instruction booklet must be carefully read before installation and before starting the
machine.
These instructions are supplied to safeguard the users in compliance with Directive 2006/95/
CE as amended and the “harmonized product Technical Standard” EN 60335-1 and EN
60335-2-58.
• THE CONNECTION TO THE ELECTRICAL AND WATER NETWORKS, FOR INSTALLING
THIS UNIT, MUST BE CARRIED OUT BY QUALIFIED OPERATORS ONLY.
• Theusershallnotcarryoutanyrepairand/ormaintenanceoperations.Inanycasecontact
qualiedpersonnel.
• Onlyqualiedpersonnelcanaccessthecontrolpanel,whenthemainpowerswitchisOFF.
• Servicingofthismachinemustbeperformedbyauthorizedpersonnelonly.
N.B.: Use genuine spare parts only. Non-genuine parts will void the warranty and the
manufacturer will take no responsibility for any damage.
•Follow the instructions given in the manufacturer’s booklet for cleaning operations (chap.5).
• Thismachinemustonlybeusedbyadults.Thisisaprofessionalmachinetobeusedbyqualied
personnel,installedandrepairedexclusivelybyqualiedTechnicalPersonnel.TheManufacturer
declines any responsibility for improper installation, use, maintenance or repair.
• Theapplianceshallnotbeusedbychildrenorpersonswithreducedphysical,sensoryormental
capabilities, or lack of experience and knowledge.
• Childrenmustbeattendedandshallstayawayfromthismachine.
NOTE: The manufacturer declines any responsibility for accidents to people or any damage
deriving from failure to observe the above listed instructions.

EN
page 29
1. MACHINE DESCRIPTION
1.1 Machine Description
Wall-hung main po-
wer switch: at instal-
lation serviceman
supply and care, ac-
cording to local laws
Standard equipment:
nr. 2 plates racks
Capacity per plate rack:
12 soup plates or
18atplates
Max Ø = 400 mm
Standard equipment:
nr. 1 glasses rack
Standard equipment:
1 cutlery basket
Optional:
Water drain pump
Optional:
Water softener
Hood
Control panel
Water softener
Water softener

EN
page 30
Total power
Power supply
Total absorption
Pump power
Protection rate
Electrical protection rate
To operate the Hood machine, 3 connections are needed:
• Electrical;
• Watersupply;
• Waterdrain.
This is a cycle machine comprising a 55°C wash cycle with detergent, a 85°C rinse cycle
with injection of rinse-aid in the boiler hull. 50x50 cm racks are used.
The machine can be complemented with wash-tables, rinse-showers and dedicated waste
collection systems.
A new wash cycle can be started by closing the hood down.
This machine is designed exclusively for washing dishes, glasses and various pots and
pans with human food type of residue.
Any other use is deemed improper.
DO NOT wash articles polluted with petrol, paint, chips of steel or iron, fragile objects or
material not resistant to the washing process.
Do not use acidic corrosive chemical products or alkaline and solvents or chlorine based
detergents.
Do not open the machine hood when operating. In any case, the machine has a special
safety device which immediately stops the unit if the hood is open, thus preventing water
spillage.
Always switch the machine completely off and drain the water tank, before accessing
inside.
The optional drain pump is used to keep the correct water level in the wash tank and drain
it, in case the drain connection is higher than the machine water discharge pipe itself.
1.2 Machine features
The machine has a noise level below 70 dB.

EN
page 31
2. 2. OPERATION
2.1 Control panel and relative symbols
A - Cycle light indicator
B - Full tank indicator
C - Salt shortage indicator
D - Heating tank indicator
E - Heating boiler indicator
F - START key to start up cycle / Programming key
G - Switching ON / OFF / Programming key
H - Info (temperature / software review / key factory)
I - Regeneration key (optional) / Decrease
L - Drain Pump key (optional) / Increase
M - Display
2.2 Machine start-up
2.2.1 Start-up
• Checkifthepumpsuctionlterisproperlyinsertedinitsseatinthewash-tankbottom
(see pict. 2).
 Thisltermustbecleanedevery20wash-cyclesorwhenevernecessary.
 DONOTusetheappliancewithoutthelter.
• Inserttheoverowpipeinitsseatinsidethepumpsuctionlter(seepict.2).
• Ifsupplied,putthesurfaceltersinplace(seepict.2).
• Shutthedishwasherhood.
• Turnthewatervalve“open”.
• TurnthemainpowerswitchON.
The display "M" will show, for a few seconds, the installed software version code.
• Themachineison"STAND-BY". In the "M" display, the message "STAND-BY" will
appear.
Pict. 1
Pict. 2 stand-by

EN
page 32
• Turnthebutton"G". The LED positioned below the “G” control, will light (green color) at
the machine’s start (when the machine is on "STAND-BY" mode, the LED will turn red).
The display "M" will read "FILLING WATER".
The display will read "HEATING", till wash-tank and boiler will reach the set
temperatures.
Should the machine be fed with hot water supply (50°C), the heating process will take
some 10 minutes.
Should the machine be fed with cold water supply (10°C), the heating process will take
some 45-55 minutes.
The display “M” will read the set wash-tank and boiler temperatures.
At this stage, the water intake starts.
2.2.2 Operation
• Inserttheracklledwithdishestowash.Theplatesmustbecorrectlyplacedintherack
(see pict. 3).
• SelectthewantedwashingcyclebypushingtheSTARTbutton"F";
thedisplaywillshowin sequence alltheseavailableprograms. Oncethewantedprogram
is displayed, do release the button.
Pict. 3
FILLING WATER
HEATING
55ºC - 85ºC
MEDIUM CYCLE
SHORT CYCLE