page 29
UK
SUMMARY Page
INSTRUCTIONS 32
INSTALLER SECTION
1. MACHINE INSTALLATION 33
1.1 Receiving the product 33
1.2 Water connection 33
1.3 Electrical connection 33
1.4 RINSE AID dispenser operation 34
1.5 Detersive dispenser installation 36
2. CONTROL PANEL AND RELATIVE SYMBOLS 37
2.1 Functions of keys during normal operation: 37
2.2 Functions of keys during programming. 37
3. CHARACTERISTICS 37
3.1 General characteristics 37
4. MACHINE PROGRAMMING 38
4.1 Parameter choice 38
4.2 Parameter programming 38
5. TEMPERATURE ADJUSTMENT 40
6. ENERGY-SAVING FUNCTION 40
7. THERMO-STOP FUNCTION 40
8. WATER FILLING 40
8.1 Conditions preventing water filling. 40
9. BOILER FILLING (Atmospheric pressure boiler version only) 40
9.1 Conditions that zero-set boiler filling. 40
10.WATER HARDNESS SETTING ON DISHWASHERS WITH
OPTIONAL REGENERATION 41
11. DRAIN PUMP OPERATION (optional on standard machines) 41
10.1 Manual draining 41
10.2 Automatic draining 41
12.PRESSURE INCREASE PUMP (optional) 42
USER SECTION
13.WASH CYCLE SELECTION 44
14. GENERAL OPERATION CYCLE 44
14.1 Clean water function cycle 44
14.2 Standard function cycle 45
14.3 Conditions that zero-set the wash 45
14.4 Conditions preventing the start of washing 45
14.5 Conditions that block the wash cycle 45
15.OPERATION 46
15.1 Detersive use 46
15.2 Rinse aid use 46
15.3 Compliance with the H.A.C.C.P. and hygiene standards. 47
15.4 Drain pump (optional only on standard version machines - standard on CLEAN
WATER) 47
15.5 Pressure increase pump (optional) 47
15.6 Regeneration function (optional) 48
15.7 Cold rinse (optional) 48
15.8 Energy-Saving function 48
15.9 Thermostop function 48
16. MAINTENANCE 49
16.1 Routine maintenance 49
16.2 Extraordinary maintenance 49
