Metra Electronics 95-6513B User manual

APPLICATIONS
KIT FEATURES
KIT COMPONENTS
TOOLS REQUIRED
METRA. THE WORLD’S BEST KITS.™
1-800-221-0932 metraonline.com
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION
INSTALLATION INSTRUCTIONS FOR PART 95-6513B
2011 JEEP
GRAND CHEROKEE
95-6513B
• Double DIN Head unit provision
• Painted matte black to match factory
• A) DDIN Brackets
WIRING & ANTENNA CONNECTIONS (Sold Separately)
• CHTO-03 Ampli ed or XSVI-6522 Non-Ampli ed Wire Harnesses
• 40-EU10 - European Antenna Adapter 2006-up
• Panel Removal Tool • Phillips Screwdriver • Socket Wrench
• Cutting tool or  le
A

TABLE OF CONTENTS
DASH DISASSEMBLY
• 2011 JEEP GRAND CHEROKEE . . . . . . . . . . . . . . . . 1
DASH PREPARATION
• 2011 JEEP GRAND CHEROKEE . . . . . . . . . . . . . . . . 2
KIT ASSEMBLY
2011 JEEP GRAND CHEROKEE
• DDIN HEAD UNIT PROVISION . . . . . . . . . . . . . . . . . . 3
*NOTE: Refer also to the instructions included with the aftermarket radio.
CAUTION : Metra recommends disconnecting the negative battery
terminal before beginning any installation. All accessories, switch-
es and especially air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP certified
technicians
INSTALLATION INSTRUCTIONS FOR PART 95-6513B

2011 JEEP GRAND CHEROKEE
95-6513B DASH DISASSEMBLY
Unclip and remove panel from
around the radio including the vents
and the climate controls. (Fig. A)
Remove (4) 7MM screws securing
radio to dash to remove. (Fig. B)
Remove (3) 7MM screws securing
the radio bracket to the sub dash.
(Fig. C)
Continue to Kit Preparation ..........
1
2
3
A
B
C
1

2
2011 JEEP GRAND CHEROKEE
95-6513B DASH PREPARATION
Modication to the sub dash is
necessary for the aftermarket
DDIN radio to t. You will need to
trim the top and bottom of the sub
dash cavity. (Fig. A)
Continue to Kit Assembly .............
1A

3
DDIN HEAD UNIT PROVISION
95-6513B KIT ASSEMBLY
Attach the Double DIN brackets
to the after market radio using the
screws supplied with the radio.
(Fig. A)
Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper
mating adapters from Metra and/or
AXXESS.
Reassemble dash in reverse order
of disassembly.
1
2
3
A