Metra Electronics 99-5850B User manual

CAUTION! All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
Metra. The World’s Best Kits.®MetraOnline.com © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 7/30/19 INST99-5850B
INSTALLATION INSTRUCTIONS
99-5850B
KIT FEATURES
• ISO DIN radio provision with pocket
• Painted scratch-resistant matte black to match the
factory color and finish
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Switch trim panel • D) Pocket • E) #8 x 3/8” Truss-head Phillips screws (4)
• F) #8 x 3/8” Pan-head Phillips screws (4) • G) #6 x 3/8” Phillips screws (4) • H) Panel clips (6) TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 9/32” socket wrench • Torx screwdriver
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: XSVI-5524-NAV
Antenna Adapter: 40-EU10
Steering wheel control interface: ASWC-1
A B C D E E
E E
E F
G H
Ford F-250/350/450/550 XL (w/o color screen) 2017-up*
*Visit MetraOnline.com for up-to-date vehicle specific applications.

1.800.221.0932
|
MetraOnline.com
2
DASH DISASSEMBLY KIT PREPARATION
1. Remove the storage mat in the pocket
above the climate-control/radio trim
panel, then remove (2) 9/32” screws
exposed. (Figure A)
2. Unclip and remove the pocket, then
remove (2) 9/32” screws exposed.
(Figure B)
3. Unclip, unplug, and remove the climate-
control/radio trim panel.
Continue to Kit Preparation (Figure A)
(Figure B)
From the factory climate-control/radio
trim panel:
1. Remove (4) Torx screws securing the climate
control panel, then remove. (Figure A) .
2. Unclip and remove the switches. (Figure A)
3. Unclip and remove the LINE IN jack. (Figure A)
4. Unclip and remove the power port assembly.
(Figure A)
To the 99-5850B climate-control/radio
trim panel:
5. Secure the climate control panel to the panel
using (4) #6 x 3/8” Phillips screws provided.
(Figure B)
6. Secure the switch trim panel to the panel
using (3) #8 x 3/8” Phillips pan-head screws
provided. (Figure B)
7. Snap the factory switches into the switch panel.
(Figure B)
8. Snap the LINE IN jack to the panel. (Figure B)
9. Snap the power port assembly to the panel.
(Figure B)
10. Attach (6) panel clips to the panel.
Continue to Kit Assembly
(Figure A)
(Figure B)

REV. 7/30/2019 INST99-5850B 3
(Figure A)
(Figure B)
(Figure C)
KIT ASSEMBLY
ISO DIN radio provision with pocket
1. Secure the pocket to the radio brackets
using the (4) #8 x 3/8” Phillips truss-
head screws provided. (Figure A)
2. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
3. Slide the radio into bracket/pocket
assembly and secure with screws
supplied with the radio. (Figure B)
4. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or AXXESS. Test the radio for proper
operation.
5. Remove (4) screws in the dash cavity,
then secure the completed assembly
into the dash using those screws.
(Figure C)
6. Snap the radio trim panel over the
completed assembly, then reassemble
the dash in reverse order of disassembly
to complete the installation.

KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
®
Metra recommends MECP
certified technicians
Metra. The World’s Best Kits.®MetraOnline.com © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 7/30/19 INST99-5850B
INSTALLATION INSTRUCTIONS
99-5850B
If you are having difficulties with the installation
of this product, contact our Tech Support line
either by phone at 386-257-1187, or email at
[e-mail]. Before
doing so, look over the instruction booklet a
second time and ensure that the installation was
performed exactly as the instruction booklet
is stated. Have the vehicle apart and ready to
perform troubleshooting steps before contacting
Metra/Axxess Tech Support.