Metra Electronics 95-7337B User manual

INSTALLATION INSTRUCTIONS FOR PART 95-7337B
95-7337B
KIT FEATURES
•DDIN Head Unit Provision
•ISO Stacked Head Unit Provision
•Painted Matte Black
A) Double DIN Trim Plate B) Double DIN Brackets
KIT COMPONENTS
A
•Small Flat Blade Screwdriver • Panel Removal Tool
•Phillips Screwdriver
1-800-221-0932
©COPYRIGHT 2007-2009 METRA ELECTRONICS CORPORATION
www.metraonline.com
TOOLS REQUIRED:
APPLICATIONS
KIA Soul
2010
B
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Harness:
•70-7303 - Kia / Hyundai Harness 2009-up
Antenna Adapter:
•40-KI11 - Kia / Hyundai Antenna Adapter 2007-up

Dash Disassembly
-KIASoul2010...................................................1
Kit Assembly
-DDIN / Stacked ISO DIN Head Unit Provisions . . . . . . . . . . . . . . . . . . . . . . . . 2
Final Assembly ..........................................3
TABLE OF CONTENTS
95-7337B
*Note:
Refer also to the instructions included with the aftermarket radio.
K NOWLEDGE IS P OWER
Enhanceyour installation and fabrication skillsby
enrolling in the most recognizedandrespected
mobile electronics school in our industry.
Log onto www.installerinstitute.comor call
800-354-6782 for more informationandtake steps
toward abetter tomorrow.
Metra recommends MECP certified
technicians.

95-7337B DASH DISASSEMBLY
KIA SOUL 2010
1
Disconnect the negative battery ter-
minal to prevent an accidental short
circuit.
1
Unclip and remove the radio/climate
control trim panel. (Figure A)
2
Remove (4) Phillips screws securing
the climate control.
(Figure B)
3
Remove (4) Phillips screws securing
the radio.
(Figure C)
4
Continue to kit assembly.
A
B
C

2
95-7337B KIT ASSEMBLY
B
A
DOUBLE DIN / STACKED ISO DIN HEAD UNIT
PROVISIONS
Slide the radio into the bracket/radio
housing assembly and secure using
the screws supplied with the radio.
(Figure B)
2
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
3
Reassemble dash in reverse order of
disassembly.
4
*Note: Refer also to the instructions included with the aftermarket radio.
Attach the Double DIN brackets to the
Double DIN Trim Plate.
(Figure A)
1

95-7337B INSTRUCTIONS
NOTES
3

95-7337B INSTRUCTIONS
NOTES
4

95-7337B INSTRUCTIONS
NOTES
5

06
INSTRUCTIONS
1-800-221-0932
REV. 11/03/09 © COPYRIGHT 2003-2009 METRA ELECTRONICS CORPORATION INST95-7337B
www.metraonline.com
95-7337B INSTRUCTIONS