Metra Electronics 95-7417 User manual

INSTALLATION INSTRUCTIONS FOR PART 95-7417
Cutting Tool • Phillips Screwdriver • Socket Wrench
1-800-221-0932 www.metraonline.com
KIT FEATURES
©COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORATION
•DDIN Head Unit Provision
•Stacked ISO DIN Head Unit Provision
A) DDIN Trim plate B) DDIN Brackets
KIT COMPONENTS
TOOLS REQUIRED:
95-7417
AB
APPLICATIONS
INFINITI 1996-1999 I-30
MERCURY 1993-2002 Villager
NISSAN 1995-1998 200SX/240SX
1998-2001 Altima / 1998-2004 Frontier
1995-2003 Maxima / 1996-2004 Pathfinder/QX4 1997-2000
1993-2003 Quest / 1995-1999 Sentra
2000-2004 Xterra

TABLE OF CONTENTS
95-7417
Dash Disassembly
1996-1999 Infiniti I-30 ................................................................. 1
1993-1995 Mercury Villager /1993-1995 Nissan Quest............... 2
1996-1998 Mercury Villager/ 1996-1998 Nissan Quest............... 3
1999-2002 Mercury Villager /1999-2003 Nissan Quest................4
1995-1999 Nissan Sentra /1995-1998 200 SX............................. 5
1995-1998 Nissan 240 SX............................................................ 6
1998-2001 Nissan Altima............................................................. 7
1998-2001 Nissan Frontier/2000-2001 Nissan Xterra ................. 8
2002-2004 Nissan Frontier/2002-2004 Nissan Xterra ................. 9
1995-1999 Nissan Maxima......................................................... 10
2000-2003 Nissan Maxima......................................................... 11
1996-2000 Nissan Pathfinder/QX4 1997-2000........................... 12
2001-2004 Nissan Pathfinder..................................................... 13
Fits all models EXCEPT the Bose and Comfort & Convenience pkgs.
Kit Assembly
Double DIN Head Unit Provision.................................................. 14
Stacked ISO DIN Head Unit Provision ......................................... 15
Final Assembly ............................................................................16
CAUTION:
Do not cycle the key when removing a dash with passenger
airbag ON/OFF switch.
*
*
K NOWLEDGE IS P OWER
Enhanceyour installation and fabrication skills
by enrolling inthe most recognized andrespected
mobile electronics school in our industry.
Log onto www.installerinstitute.com
or call 800-354-6782 formore information
and take stepstoward abetter tomorrow.

95-7417
1
Disconnect the negative battery
terminal to prevent an accidental
short circuit.
1
Unclip and remove the shift lever
trim panel and remove the (2)
screws exposed.
2
1996-1999 INFINITI I-30
Remove (1) screw to the left of the
ashtray then unclip and remove the
ashtray assembly.
3
Unclip and remove the clock/vent
assembly.
4
Remove (4) screws securing the
radio.
5
DASH DISASSEMBLY

95-7417 DASH DISASSEMBLY
1993-1995 MERCURYVILLAGER
1993-1995 NISSAN QUEST
Disconnect the negative battery
terminal to prevent an accidental
short circuit.
Remove (1) screw above the climate
controls.
2
Unclip and remove the radio trim
panel.
3
Remove (4) screws securing the
radio.
4
1
2

3
Disconnect the negative battery
terminal to prevent an accidental
short circuit.
1
Remove (4) plastic screws and
screw anchors from the base of the
storage compartment then remove
the compartment.
2
Remove (2) Phillips screws from
above the radio opening.
4
Remove the ashtray.
5
Remove (4) screws securing the
radio.
6
Remove (2) Phillips screws from the
base of the radio trim panel.
3
95-7417 DASH DISASSEMBLY
1996-1998 MERCURYVILLAGER
1996-1998 NISSAN QUEST

Disconnect the negative battery
terminal to prevent an accidental
short circuit.
1
4
95-7417 DASH DISASSEMBLY
Open the ashtray/cupholder assem-
bly and depress the retaining clips
on eachside to remove.
2
Remove (2) Phillips screws from
eachside of the ashtray/cupholder.
3
Unclip the dash trim panel and
remove.
5
Remove (4) Phillips screws securing
the radio.
6
Remove (4) plastic rivets from the
lower pocket and slide the pocket
back. Note: It is not necessary to
fully remove the pocket.
4
1999-2002 MERCURYVILLAGER
1999-2003 NISSAN QUEST

5
Unclip and remove the dummy plate
above the climate controls.
2
Remove (1) Phillips screw from
behind dummy plate.
3
Unclip and remove radio trim panel.
4
Remove (4) Phillips screws securing
radio.
5
95-7417 DASH DISASSEMBLY
1995-1999 NISSAN SENTRA
1995-1998 200 SX
Disconnect the negative battery
terminal to prevent an accidental
short circuit.
1

6
95-7417
1995-1998 NISSAN 240 SX
DASH DISASSEMBLY
Disconnect the negative battery ter-
minal to prevent an accidental short
circuit.
Unclip and remove the climate con-
trol trim panel and remove the (2)
exposed behind.
Unclip and remove the shift lever
trim panel and remove the (2) screws
exposed behind.
1
2
3
Remove the ashtray and (1) Phillips
screw exposed in the ashtray cavity.
4
Unclip and remove the radio trim
panel, factory radio and pocket
assembly.
5

95-7417
DASH DISASSEMBLY
1998-2001 NISSAN ALTIMA
7
Disconnect the negative battery terminal
to prevent an accidental short circuit.
Unclip the shift lever trim panel and
remove (2) Phillips screws at the base
of the radio trim panel.
1
2
Remove (2) Phillips screws above the
radio opening.
3
1
Unclip and remove the radio trim panel.
4
Remove (4) Phillips screws securing the
radio.
5

95-7417
DASH DISASSEMBLY
1998-2001 NISSAN FRONTIER
2000-2001 NISSAN XTERRA
8
Disconnect the negative battery terminal
to prevent an accidental short circuit.
Remove the ashtray and the (2) Phillips
screws exposed in the ashtray cavity.
1
2
Unclip and remove the radio trim panel.
3
Remove (4) Phillips screws securing the
radio.
4

95-7417
DASH DISASSEMBLY
2002-2004 NISSAN FRONTIER
2002-2004 NISSAN XTERRA
9
Disconnect the negative battery terminal
to prevent an accidental short circuit.
Unclip and remove the shift lever trim
panel.
1
2
Remove (2) Phillips screws exposed in
the shift lever cavity.
3
Remove (2) Phillips screws under the
climate control.
4
Unclip and remove the radio trim panel.
5
Remove (4) Phillips screws securing the
radio.
6

95-7417
DASH DISASSEMBLY
1995-1999 NISSAN MAXIMA
10
Disconnect the negative battery terminal
to prevent an accidental short circuit.
Unclip the shift lever trim panel.
1
2
Remove the (2) Phillips screws at the
base of the radio trim panel.
3
Remove (1) Phillips screw to the left of
the ashtray and unclip the ashtray
assembly.
4
Unclip and remove the clock/vent
assembly.
5
Remove (4) Phillips screws securing the
radio.
6

95-7417
DASH DISASSEMBLY
2000-2003 NISSAN MAXIMA
11
Disconnect the negative battery terminal
to prevent an accidental short circuit.
Unclip and remove the vent/radio trim
panel. Note: For Bose systems the vent
assembly will be removed without the
trim panel.
1
2
Remove the ashtray insert and (1)
Phillips screw exposed behind.
3
2
4
5
55
5
Unclip and remove the shift lever/ash-
tray trim panel.
4
Remove (2) Phillips screws above the
radio and (2) Phillips screws below the
climate control panel then remove the
radio/climate control assembly.
5

95-7417
DASH DISASSEMBLY
1996-2000 NISSAN PATHFINDER/QX4 1997-2000
12
Disconnect the negative battery terminal
to prevent an accidental short circuit.
Remove (2) Phillips screws from the
base of the radio trim panel.
1
2
Unclip and remove the radio trim panel.
3
Remove (4) Phillips screws securing
radio.
4

95-7417
DASH DISASSEMBLY
2001-2003 NISSAN PATHFINDER
13
Disconnect the negative battery terminal
to prevent an accidental short circuit.
Unclip and remove the vent/clock
assembly.
(Figure A)
1
2
Remove (2) Phillips screws from the top
of the radio trim panel then remove the
panel.
(Figure B)
3
Remove (4) Phillips screws securing
radio. (Figure C)
4
A
B
C

14
95-7417
KIT ASSEMBLY
2
A
Attach the factory mounting brackets
and the 95-7417 DDIN trim
plate/bracket assembly to the DDIN
head unit with the screws supplied
with the unit. (
Figure B)
Slide the appropriate bracket into
the trim plate aligning the holes in
the trim plate to the clips on the
bracket. (
Figure A)
1
B
DOUBLE DIN HEAD UNIT PROVISION

95-7417
KIT ASSEMBLY
15
2
A
Attach the factory mounting brackets
and the 95-7417 DDIN trim
plate/bracket assembly to the
stacked ISO DIN head units with the
screws supplied with the units.
(
Figure B)
Slide the appropriate bracket into
the trim plate aligning the holes in
the trim plate to the clips on the
bracket. (
Figure A)
1
B
STACKED ISO DIN HEAD UNIT PROVISION

16
FINAL ASSEMBLY
1
Locate the factory wiring harness in the dash and make the connection as shown.
Metra recomends using the proper mating adapter and making the connections as
shown. (Isolate and individually tape off the ends of any unused wires to prevent
electrical short circuit.)
2
Re-connect the negative battery terminal and test the unit for proper operation.
3
Reassemble radio and dash assemblies in reverse order of disassembly.
A
A) Strip wire ends back 1/2"
B) Twist ends together
C) Solder
D) Tape
B
C
D
Make wiring connections using the EIA color code chart shown below and the instructions included with the head
unit. Metra recommends making connections as shown below; Strip, Splice, Solder, Tape. Isolate and individually
tape off ends of any unused wires to prevent electrical short circuit.
12V Ignition / Acc . . . Red
12V Batt / Memory . . Yellow
Ground . . . . . . . . . . . Black*
Power Antenna . . . . . Blue
Amp Turn-On . . . . . . Blue / White
Amp Ground . . . . . . . Black / White
Illumination. . . . . . . . Orange
Dimmer . . . . . . . . . . Orange / White
Right Front (+) . . . . . Gray
Right Front (-). . . . . . Gray / Black
Left Front (+) . . . . . . White
Left Front (-) . . . . . . . White / Black
Right Rear (+). . . . . . Violet
Right Rear (-) . . . . . . Violet / Black
Left Rear (+). . . . . . . Green
Left Rear (-) . . . . . . . Green / Black
*NOTE: When Black a wire is not present, ground radio to vehicle chassis.
All colors may not be present on all leads due to manufacturer’s specifications.
METRA / EIA WIRING CODE
FINAL WIRING CONNECTIONS
95-7417
FINAL ASSEMBLY

17
95-7417
NOTES

95-7417 INSTRUCTIONS
1-800-221-0932 www.metraonline.com
REV. 07/28/09 © COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORATION INST95-7417