Metra Electronics 99-9000 User manual

INSTALLATION INSTRUCTIONS FOR PART 99-9000
APPLICATIONS
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
• DINheadunitprovision
• Variousmountingdepths
•A)Underdashhousing•B)(8)Phillipsscrews
KIT FEATURES
KIT COMPONENTS
•Phillipsscrewdriver•CuttingTool•Adjustablewrench
TOOLS REQUIRED
Universal
99-9000
CF-104UD, SEA/HOS, SEA/HOS-W
A B

99-9000
All Vehicles
1. Ifan“openback”installationis
desired(foradditionaldepth),cut
theUnderdashHousingalongthe
scoredlineandremovetherear
portionoftheHousing.(FigureA)
Dash Disassembly
(Figure A) (Figure A)
DIN head unit provision
1. SlidetheDINcageintothekit
andsecurebybendingthemetal
lockingtabsdown.
2. Slidetheaftermarketheadunitinto
thecageuntilsecure.(FigureA)
3. Locatethefactorywiringharness
inthedash.Metrarecommends
usingthepropermatingadapter
fromMetraorAXXESS.
Kit Assembly

99-9000
DIN head unit provision (continued)
4. Placetheheadunit/kit
assemblyunderthedashuntil
thedesiredmountinglocationhas
beenestablished.(FigureB)
5. Markthescrewholesonto
the dash.
6. Re-connectthebattery
terminalandtesttheunitfor
proper operation.
7. Mounttheheadunit/kit
assemblytothepre-marked
holesonthedashwith(8)Phillips
screwssupplied(If the back of
the Underdash Housing was
removed in Step #1, fewer screws
will be used).(FigureC)
(Figure B)
Kit Assembly
(Figure C)