Micron T 2040 User manual

Lead Free Soldering Station 68W
T 2040
User Manual
» LED temperature readout » Soldering stand » Ergonomic handle design
» Auto standby » Auto shutdown » Quick to reach temperature
» Precise temperature control » ESD safe
Features
Ideal entry level, general purpose soldering iron for students,
enthusiasts and professionals alike.

1
Voltage: 120/230V AC
Power: 68W
Temperature Range: 80°C to 480°C
Temperature Stability: ±2°C
Display Method: LED
Fuse: T1A
Specifications
Power On/Off Button
Controls
2LED Segment Display
3Soldering Roll Holder
4
5Temperature Lock /
°C or °F mode selection
6Soldering Handle
7
8Soldering Tip Slot
9 Tip Cleaning Sponge
Ideal entry level, general purpose soldering iron for students, enthusiasts and professionals
alike.
An electronic temperature controlled soldering station, designed to meet the needs of
electronic production environments and DIY work bench spaces. It features a slender ‘pencil
design’ iron handle with comfortable rubberised grip, connected with a burn-resistant lead.
Temperature is easily selected between 80°C to 480°C using the front panel dial. A handy
temperature lock prevents accidental temperature adjustment.
The sleeper iron stand detects inactivity and reduces tip temperatures after 10 minutes.
After 20 minutes of inactivity the iron switches off automatically. This helps to save power
and extend the durability of your iron tip. When set, the iron will maintain tip temperature
to ±2°C. Includes 1.2mm ne round tip, solder reel holder and cleaning sponge.
ESD safe design.
Overview
Soldering Handle Stand
2.
Temperature Control Knob
1
2
3
4
5
6
7
8
9

1. Power Button
Once you have plugged the unit into the mains power, turn the unit on by switching the
“ ” button.
Operational Guide
2. Temperature Setting
You can adjust the temperature of the unit by turning the temperature knob. The
temperature will be displayed while you are adjusting it. Once you have finished
adjusting the temperature, wait 3 seconds for the display screen to show the correct
temperature.
Soldering Tips
Micron Part # TB2040
Micron Part # TD2040
Micron Part # TH2040
3.

3. Temperature Locking Function
Press and hold the “LOCK” button for 3 seconds while in working mode to lock the
current temperature. You will then see “ ” displayed on screen.
To unlock the current temperature, press and hold the “LOCK” button for 3 seconds again.
4. Switching Temperature Modes (°C/°F)
The current temperature mode (°C or °F) can be changed by pressing and holding the
LOCK button for 3 seconds. An indication light will show and the temperature mode will
change.
4.

5. Auto Standby Function
The unit will go into Auto Standby mode after 10 minutes of inactivity. The display screen
will show below:
6. Auto Sleep Function
The unit will go into Auto Sleep mode after 20 minutes of inactivity. The display screen will
show as below. Return to normal working mode by adjusting the knob.
7. Warning
E02 showing on the display screen means that there is a problem with the sensor as below:
5.

6.
Important Safety Precautions - PLEASE READ BEFORE USE.
This appliance is not intended for use by young children or infirm persons without
supervision. Young children should be supervised to ensure they do not play with the
appliance.
To avoid electric shock or injury to the body and to prevent fire hazards, the following
rules must be observed when using this equipment. There are no user serviceable parts
inside this unit. In the event of malfunction please return to your place of purchase (see
our warranty statement for procedure), for servicing.
The misuse of this product may lead to serious injury and or death.
WARNING
When using this product, the soldering iron tip and metal barrel can reach
temperatures between 80°C and 480°C. These temperatures can cause burns to
the user or cause a fire if used improperly.
• Keep product away from flammable materials.
• Keep away from wet areas and excessive moisture.
• Keep the product out of reach of children.
• Do not use this product if you are inexperienced with its operation. Seek
guidance from experienced users.
• Do not modify the product and its accessories
• When replacing or interchanging soldering tips, turn the unit power off and let
the iron cool down.
• Use only Micron replacement tips to ensure safe operation.
• Turn power switch off and unplug when not in use.

Product Warranty Statement
Altronic Distributors warrants this product for one year from date of purchase from Altronics or its resellers to the
consumer. If this item is part of an installation or another product, please contact the installer or supplier for your
warranty.
During the warranty period, we undertake to repair or replace your product at no charge if found to be defective due
to a manufacturing fault. The warranty excludes damage by misuse or incorrect installation (i.e. failure to install and
operate device according to specifications in the supplied instruction manual), neglect, shipping accident, or no fault
found, nor by use in a way or manner not intended by the supplier.
For repair or service please contact your PLACE OF PURCHASE.
If this item was purchased directly from Altronics please make a warranty claim by:
1. FOR MAIL ORDER CUSTOMERS (includes school and trade orders),
a) Calling your nearest store location and quoting your tax invoice number.
b) Upon contacting Altronics, we will issue an R.A. (Return Authorisation). As Altronics have a number of service
agents throughout Australia, a copy of the R.A. will be emailed, faxed or mailed to you with full instructions of how
and where to send the goods. The freight for shipping goods back to
Altronics for all repairs is at the customers expense.
c) A copy of the R.A. form, (or at the very minimum, the R.A. number) must accompany the
goods to effect the repair.
d) Altronics will pay the return freight to the customer where the warranty claim has been accepted.
e) Please quote the R.A. number in any correspondence to us.
2. FOR OVER THE COUNTER PURCHASES to make a warranty claim, please return the goods to us in any of our stores,
with a copy of your proof of purchase (tax invoice).
a) Upon leaving the goods at one of our stores, an R.A. number will be issued to you.
b) Once repaired, you will be contacted, advising that the goods are ready to be collected from the store.
It is at Altronics discretion as to whether the goods will be repaired or replaced (whilst under warranty); and as to
whether identical goods will be used to replace the item due to changes of models / products.
Note: Under no circumstances should you attempt to repair the device yourself or via a non-authorised Altronics
service centre, as this will invalidate the warranty!
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Revision 16/10/2020
Micron is a trademark of Altronic Distributors Pty. Ltd.
Distributed by Altronic Distributors Pty. Ltd.
www.altronics.com.au [phone].
7.