Midea MSV1-12HRDN1-MQ0W User manual

0
Revision A: 1305080001, Content updated.
Model Numbers:
MSV1-09HRFN1-MT0W MSV1-12HRFN1- MT0W
MSV1-12HRDN1-MQ0W MSV1-18HRDN1-MQ0W
MSV1-24HRDN1-MQ0W
VERTU MONO Split DC Inverter
Air Conditioner
SERVICE MANUAL Mono DC
Table of Contents
1. Precaution
2. Part names and functions
3. Dimension
4. Refrigerant Cycle Diagram
5. Wiring Diagram
6. Installation Details
7. Operation Characteristics
8. Electronic function
9. Troubleshooting
10. Exploded view
11. Disassembly instructions
WARNING
Installation MUST conform with local building codes or, in the absence of local codes, with the
National Electrical Code NFPA70/ANSI C1-1993 or current edition and Canadian Electrical
Code Part1 CSA C.22.1.
The information contained in the manual is intended for use by a qualified service technician
familiar with safety procedures and equipped with the proper tools and test instruments
Installation or repairs made by unqualified persons can result in hazards to you and others.
Failure to carefully read and follow all instructions in this manual can result in equipment
malfunction, property damage, personal injury and/or death.
This service is only for service engineer to use.

CONTENTS
1. Precaution...............................................................................................................................................1
1.1 Safety Precaution.......................................................................................................................... 1
1.2 Warning......................................................................................................................................... 1
2. Part Names And Functions.....................................................................................................................2
2.1 Model Names of Indoor/Outdoor units.......................................................................................... 2
2.2 Part names of Indoor/Outdoor units ............................................................................................. 2
2.3 Functions of Indoor/Outdoor units ................................................................................................ 3
3. Specification ...........................................................................................................................................6
4. Dimension.............................................................................................................................................12
4.1 Indoor Unit................................................................................................................................... 12
4.2 Outdoor Unit................................................................................................................................ 14
5. Refrigerant Cycle Diagram ...................................................................................................................15
6. Wiring Diagram .....................................................................................................................................16
6.1 Indoor Unit................................................................................................................................... 16
6.2 Outdoor Unit................................................................................................................................ 19
7 Installation Details.................................................................................................................................27
7.1 Wrench torque sheet for installation........................................................................................... 29
7.2 Connecting the cables ................................................................................................................ 29
7.3 Pipe length and the elevation ..................................................................................................... 29
7.4 Installation for the first time......................................................................................................... 30
7.5Adding the refrigerant after running the system for many years ................................................ 31
7.6 Re-installation while the indoor unit need to be repaired........................................................... 32
7.7 Re-installation while the outdoor unit need to be repaired......................................................... 33
8. Operation Characteristics ....................................................................................................................34
9. Electronic Function...............................................................................................................................35
9.1 Abbreviation ................................................................................................................................ 35
9.2 Display function........................................................................................................................... 35
9.3 Main Protection........................................................................................................................... 36
9.4 Operation Modes and Functions................................................................................................. 37
10. Troubleshooting..................................................................................................................................45
10.1 Indoor Unit Error Display .......................................................................................................... 47
10.2 Outdoor unit error display......................................................................................................... 48
10.3 Diagnosis and Solution............................................................................................................. 49
11. Exploded View.....................................................................................................................................73
11.1 Indoor unit ................................................................................................................................. 73
11.2 Outdoor unit............................................................................................................................... 83
12 Disassembly Instructions....................................................................................................................95
12.1 Indoor unit................................................................................................................................. 95
12.2 Outdoor unit .............................................................................................................................. 99

1
1. Precaution
1.1 Safety Precaution
To prevent injury to the user or other
people and property damage, the following
instructions must be followed.
Incorrect operation due to ignoring
instruction will cause harm or damage.
Before service the unit, be sure to
read this service manual at first.
1.2 Warning
Installation
Do not use a defective or underrated
circuit breaker. Use this appliance on a
dedicated circuit.
There is risk of fire or electric shock.
For electrical work, contact the dealer,
seller, a qualified electrician, or an
authorized service center.
Do not disassemble or repair the product,
there is risk of fire or electric shock.
Always ground the product.
There is risk of fire or electric shock.
Install the panel and the cover of
control box securely.
There is risk of fire of electric shock.
Always install a dedicated circuit and
breaker.
Improper wiring or installation may cause
electric shock.
Use the correctly rated breaker of
fuse.
There is risk of fire or electric shock.
Do not modify or extend the power
cable.
There is risk of fire or electric shock.
Do not install, remove, or reinstall the
unit by yourself (customer).
There is risk of fire, electric shock, explosion,
or injury.
Be caution when unpacking and
installing the product.
Sharp edges could cause injury, be especially
careful of the case edges and the fins on the
condenser and evaporator.
For installation, always contact the
dealer or an authorized service center.
Do not install the product on a
defective installation stand.
Be sure the installation area does not
deteriorate with age.
If the base collapses, the air conditioner could
fall with it, causing property damage, product
failure, and personal injury.
Do not let the air conditioner run for a
long time when the humidity is very high
and a door or a window is left open.
Take care to ensure that power cable
could not be pulled out or damaged during
operation.
There is risk of fire or electric shock.
Do not place anything on the power
cable.
There is risk of fire or electric shock.
Do not plug or unplug the power
supply plug during operation.
There is risk of fire or electric shock.
Do not touch (operation) the product
with wet hands.
Do not place a heater or other
appliance near the power cable.
There is risk of fire and electric shock.
Do not allow water to run into
electrical parts.
It may cause fire, failure of the product, or
electric shock.
Do not store or use flammable gas or
combustible near the product.
There is risk of fire or failure of product.
Do not use the product in a tightly
closed space for a long time.
Oxygen deficiency could occur.
When flammable gas leaks, turn off
the gas and open a window for ventilation
before turn the product on.
If strange sounds or smoke comes
from product, turn the breaker off or
disconnect the power supply cable.

2
There is risk of electric shock or fire.
Stop operation and close the window
in storm or hurricane. If possible, remove
the product from the window before the
hurricane arrives.
There is risk of property damage, failure of
product, or electric shock.
Do not open the inlet grill of the
product during operation. (Do not touch the
electrostatic filter, if the unit is so equipped.)
There is risk of physical injury, electric shock,
or product failure.
When the product is soaked, contact
an authorized service center.
There is risk of fire or electric shock.
Be caution that water could not enter
the product.
There is risk of fire, electric shock, or product
damage.
Ventilate the product from time to
time when operating it together with a stove
etc.
There is risk of fire or electric shock.
Turn the main power off when
cleaning or maintaining the product.
There is risk of electric shock.
When the product is not be used for a
long time, disconnect the power supply plug
or turn off the breaker.
There is risk of product damage or failure, or
unintended operation.
Take care to ensure that nobody
could step on or fall onto the outdoor unit.
This could result in personal injury and
product damage.
CAUTION
Always check for gas (refrigerant)
leakage after installation or repair of
product.
Low refrigerant levels may cause failure of
product.
Install the drain hose to ensure that
water is drained away properly.
A bad connection may cause water leakage.
Keep level even when installing the
product.
It can avoid vibration of water leakage.
Do not install the product where the
noise or hot air from the outdoor unit could
damage the neighborhoods.
It may cause a problem for your neighbors.
Use two or more people to lift and
transport the product.
Do not install the product where it will
be exposed to sea wind (salt spray) directly.
It may cause corrosion on the product.
Corrosion, particularly on the condenser and
evaporator fins, could cause product
malfunction or inefficient operation.
Operational
Do not expose the skin directly to
cool air for long time. (Do not sit in the
draft).
Do not use the product for special
purposes, such as preserving foods, works
of art etc. It is a consumer air conditioner,
not a precision refrigerant system.
There is risk of damage or loss of property.
Do not block the inlet or outlet of air
flow.
Use a soft cloth to clean. Do not use
harsh detergents, solvents, etc.
There is risk of fire, electric shock, or damage
to the plastic parts of the product.
Do not touch the metal parts of the
product when removing the air filter. They
are very sharp.
Do not step on or put anything on the
product. (outdoor units)
Always insert the filter securely.
Clean the filter every two weeks or more
often if necessary.
A dirty filter reduces the efficiency of the air
conditioner and could cause product
malfunction or damage.
Do not insert hands or other objects
through air inlet or outlet while the product
is operated.
Do not drink the water drained from
the product.

3
Use a firm stool or ladder when
cleaning or maintaining the product.
Be careful and avoid personal injury.
Replace the all batteries in the remote
control with new ones of the same type. Do
not mix old and new batteries or different
types of batteries.
There is risk of fire or explosion.
Do not recharge or disassemble the
batteries. Do not dispose of batteries in a
fire.
They may burn of explode.
If the liquid from the batteries gets
onto your skin or clothes, wash it well with
clean water. Do not use the remote of the
batteries have leaked.

2
2. Part Names And Functions
2.1 Model Names of Indoor/Outdoor units
DC
Inverter
Capacity
Indoor units
Outdoor units
9k
MSV1-09HRFN1-MT0W
MOC-09HFN1-MT0W
12k
MSV1-12HRFN1-MT0W
MOC-12HFN1-MT0W
MSV1-12HRDN1-MQ0W
MOC-12HDN1-MQ0W
18k
MSV1-18HRDN1-MQ0W
MOF-18HDN1-MQ0W
24k
MSV1-24HRDN1-MQ0W
MOG-24HDN1-MQ0W
2.2 Part names of Indoor/Outdoor units
Indoor Unit:

3
2.3 Functions of Indoor/Outdoor units
Ionizer
Silver Ion Filter
Vitamin C Filter(O)
3M HAF Filter(O)
Bio Filter(O)
Golden Fin
Cold Catalyst Filter
Compressor Crankcase Heater
Self Clean(O)
Follow Me
8 Degree Heating(O)
Heat Compensation(O)
Self-diag. Function
PTC Heating Belt(O)
Filter
Automatic Panel
O: optional function

4
Cold Catalyst Filter:
Eliminate formaldehyde and other volatile organic compounds as well as harmful gases and odors.
Ionizer:
Release negative ions, eliminate odor, dust, smoke and pollen particles to give you fresh and healthy air.
Silver Ion Filter:
Sterilize bacteria effectively by decomposing cell wall of bacteria.
Vitamin C Filter:
Release Vitamin C which can eliminate active oxygen to beautify the skin.
3M HAM Filter:
Open-hole-structure with charged electrostatic effectively capture dust and particles, ensure maximum air
flow and minimum pressure drop.
Bio Filter(O):
Bio filter consists of a specialized biological enzyme and Eco filter. The Eco filter catches very small
airborne dust particles and bacteria, fungi and microbes. Biological enzyme kills bacteria by dissolving their
cell wall thus eliminating the problem of re-pollution.
Golden Fin:
The Golden hydrophilic condenser can improve the heating efficiency by accelerating the defrosting
process. The unique anticorrosive golden coating on the condenser can withstand the salty air, rain and
other corrosive elements.
Self Clean:
When this function is activated, firstly the indoor unit operates as Fan-only mode with low fan speed, during
this period the condensed water will take some dust on evaporator fins away. After that the unit turns to
heating operation with low fan speed which dries the inside of indoor unit. Finally it turns to fan-only mode
and blows away the wet air. The whole process cleans the internal side of indoor unit and prevents the
breeding of bacteria.
Follow me:
With this technology, a temperature sensor is built in the remote control when you stay close to the remote
control, the unit will automatically change the operation mode to supply comfortable temperature just like
the air conditioner is following you.
Automatic panel:
There is a stepper motor in the frame assembly, when the AC is switched on, it can drive gear, open the top
panel to increase air volume.
8 Degree Heating:
In heating operation, the preset temperature of the air conditioner can be as lower as 8°C, which keeps
the room temperature steady at 8°C for in winter.
Heat compensation:
Based on different installation height of indoor unit, the temperature deviation of the sensor sensed against
the actual floor temperature always is different. Changing the jumping wires combination on the indoor PCB
is possible to compensate the deviation. This could be achieved by installer in the installation field.
Self-diag.Function:
Monitoring some abnormal operations or parts failures, microcomputer of the air conditioner will switch off
and protect the system automatically.Meanwhile, the error or protection code will be displayed on the indoor
unit.
PTC heating belt:
With a PTC heating belt fitted on the base plate of the outdoor unit, the rain, snow or defrosted water
accumulating on the base plate is avoided.

5
Compressor crankcase heater:
The oil dissolves easily in refrigerant, especially in low temperature condition. The crankcase heating belt
can heat the bottom of the compressor to avoid pumping out too much oil with the refrigerant, which helps
to protect the compressor.

6
3. Specification
Code
2T0032300361
2T0032500279
Indoor code
220032304710
220032503610
Outdoor code
220037303660
220037503660
Indoor model
MSV1-09HRFN1-MT0W
MSV1-12HRFN1- MT0W
Outdoor model
MOC-09HFN1-MT0W
MOC-12HFN1-MT0W
Power supply
Ph-V-Hz
1Ph, 208-230V～, 60Hz
1Ph, 208-230V～, 60Hz
MINIMUM CIRCUIT AMPACITY
A
15
15
MAX.FUSE
A
20
20
Moisture removal
L/h
1.0
1.2
Compressor
Model
DA108X1C-20FZ3
DA108X1C-20FZ3
Type
ROTARY
ROTARY
Brand
GMCC
GMCC
Capacity
Btu/h
10918
10918
Input
W
855
855
Rated current(RLA)
A
5.3
5.3
Locked rotor Amp(LRA)
A
10
10
Thermal protector
INT01L-4639 / CS-74
INT01L-4639 / CS-74
Thermal protector position
EXTERNAL
EXTERNAL
Capacitor
uF
35
35
Refrigerant oil/oil charge
ml
ESTER OIL VG74 / 480
ESTER OIL VG74 / 480
Indoor fan motor
Model
WZDK20-38G
WZDK20-38G
Brand
Panasonic
Panasonic
Input
W
20(Output )
20(Output )
RLA
A
0.06
0.06
LRA
A
/
/
Winding Resistance
Ω
/
/
Capacitor
uF
----
----
Speed(Hi/Mi/Lo)
r/min
1250/1000/900
1250/1000/900
Indoor unit
Dimension(W*D*H)
mm
845x165x286
845x165x286
Dimension(W*D*H)
inch
33.27x6.50x11.26
33.27x6.50x11.26
Packing (W*D*H)
mm
905x285x355
905x285x355
Packing (W*D*H)
inch
35.63x11.22x13.98
35.63x11.22x13.98
Net/Gross weight
Kg
9/11
9/11
Net/Gross weight
lbs.
19.84/24.25
19.84/24.25
Outdoor fan motor
Model
WZDK35-38G
WZDK35-38G
Brand
Panasonic
Panasonic
Input
W
35(Output )
35(Output )
RLA
A
0.15
0.15
LRA
A
/
/
Winding Resistance
Ω
/
/
Capacitor
uF
----
----

7
Speed
r/min
800
800
Outdoor unit
Dimension(W*D*H)
mm
760x285x590
760x285x590
Dimension(W*D*H)
inch
29.92x11.22x23.23
29.92x11.22x23.23
Packing (W*D*H)
mm
887x355x645
887x355x645
Packing (W*D*H)
inch
34.92x13.98x25.39
34.92x13.98x25.39
Net/Gross weight
Kg
38.5/41
39.5/42
Net/Gross weight
lbs.
84.88/90.39
87.08/92.59
Refrigerant type
g
R410A/1100g
R410A/1250g
Refrigerant type
oz
R410A/38.8
R410A/44.1
Design pressure
PSIG
550/340 PSIG
550/340 PSIG
Application area
m2
13-22
18-29
Application area
sq.ft
140-237
194-312

8
Code
2T0032500244
2T0032700154
Indoor code
220032503340
220032702340
Outdoor code
220037502530
220037701530
Inoor model
MSV1-12HRDN1-MQ0W
MSV1-18HRDN1-MQ0W
Outdoor model
MOC-12HDN1-MQ0W
MOF-18HDN1-MQ0W
Power supply
Ph-V-Hz
1Ph, 208-230V～, 60Hz
1Ph, 208-230V～, 60Hz
MINIMUM CIRCUIT AMPACITY
A
15
15
MAX.FUSE
A
20
20
Moisture Removal
L/h
1.2
1.8
Compressor
Model
DA108X1C-20FZ3
DA150S1C-20FZ
Type
ROTARY
Twin-rotary
Brand
GMCC
GMCC
Capacity
Btu/h
10918
15286
Input
W
855
1150
Rated current(RLA)
A
5.3
9.7
Locked rotor Amp(LRA)
A
10
----
Thermal protector
INT01L-4639 / CS-74
----
Thermal protector position
EXTERNAL
----
Capacitor
uF
35
35
Refrigerant oil/oil charge
ml
ESTER OIL VG74 / 480
ESTER OIL VG74/500
Indoor fan motor
Model
RPG20B
YDK36-4CB(A)
Brand
Welling
Welling
Input
W
43
79/58/50
RLA
A
0.2
0.39
LRA
A
0.23
0.48
Winding Resistance
Ω
381/267
242/79
Capacitor
uF
1.5
3
Speed(Hi/Mi/Lo)
r/min
1250/1060/900
1245 / 1040 / 940
Indoor unit
Dimension(W*D*H)
mm
845x165x286
1082x207x320
Dimension(W*D*H)
inch
33.27x6.50x11.26
42.60x8.15x12.60
Packing (W*D*H)
mm
905x285x355
1180x425x310
Packing (W*D*H)
inch
35.63x11.22x13.98
46.46x16.73x12.20
Net/Gross weight
Kg
10/13.5
14.5/20
Net/Gross weight
lbs.
22.05/29.76
31.97/44.09
Outdoor fan motor
Model
YDK24-6GB
YDK53-6FB
Brand
Welling
Welling
Input
W
72/53
166/105
RLA
A
0.33
0.74
LRA
A
0.41
0.95
Winding Resistance
Ω
293/169
56/76
Capacitor
uF
2.5
2.5
Speed
r/min
830/570
800/600
Outdoor unit
Dimension(W*D*H)
mm
760x285x590
845x320x700
Dimension(W*D*H)
inch
29.92x11.22x23.23
33.27x12.60x27.56

9
Packing (W*D*H)
mm
887x355x645
965x395x755
Packing (W*D*H)
inch
34.92x13.98x25.39
37.99x15.55x29.72
Net/Gross weight
Kg
39/41.5
50/54
Net/Gross weight
lbs.
85.98/91.49
110.23/119.05
Refrigerant type
g
R410A/1100g
R410A/1650g
Refrigerant type
oz
R410A/38.8
R410A/58.2
Design pressure
PSIG
550/340 PSIG
550/340 PSIG
Application area
m2
18-29
26-44
Application area
sq.ft
194-312
280-474

10
Code
2T0033000227
Indoor code
220033002880
Outdoor code
220038002170
Inoor model
MSV1-24HRDN1-MQ0W
Outdoor model
MOG-24HDN1-MQ0W
Power supply
Ph-V-Hz
1Ph, 208-230V～, 60Hz
MINIMUM CIRCUIT AMPACITY
A
15
MAX.FUSE
A
20
Moisture Removal
L/h
2.5
Compressor
Model
DA150S1C-20FZ
Type
Twin-rotary
Brand
GMCC
Capacity
Btu/h
15286
Input
W
1150
Rated current(RLA)
A
9.7
Locked rotor Amp(LRA)
A
----
Thermal protector
----
Thermal protector position
----
Capacitor
uF
35
Refrigerant oil/oil charge
ml
ESTER OIL VG74/500
Indoor fan motor
Model
YDK36-4CB(A)
Brand
Welling
Input
W
79/58/50
RLA
A
0.39
LRA
A
0.48
Winding Resistance
Ω
242/79
Capacitor
uF
3
Speed(Hi/Mi/Lo)
r/min
1245 / 1040 / 940
Indoor unit
Dimension(W*D*H)
mm
1082x207x320
Dimension(W*D*H)
inch
42.60x8.15x12.60
Packing (W*D*H)
mm
1180x425x310
Packing (W*D*H)
inch
46.46x16.73x12.20
Net/Gross weight
Kg
14.5/20
Net/Gross weight
lbs.
31.97/44.09
Outdoor fan motor
Model
YDK53-6NB
Brand
Welling
Input
W
157.3/93.8
RLA
A
0.75
LRA
A
0.989
Winding Resistance
Ω
56.5/117.5
Capacitor
uF
2.5
Speed
r/min
790/540
Outdoor unit
Dimension(W*D*H)
mm
900x315x860
Dimension(W*D*H)
inch
35.43x12.40x33.86

11
Packing (W*D*H)
mm
1043x395x915
Packing (W*D*H)
inch
41.06x15.55x36.02
Net/Gross weight
Kg
62/67
Net/Gross weight
lbs.
136.69/147.71
Refrigerant type
g
R410A/1900g
Refrigerant type
oz
R410A/67.0
Design pressure
PSIG
550/340 PSIG
Application area
m2
34-56
Application area
sq.ft
366-603

12
4. Dimension
4.1 Indoor Unit
W D
H
Model
W
D
H
MSV1-09HRFN1-MT0W
845mm
(33.27in)
165mm
(6.5in)
286mm
(11.26in)
MSV1-12HRFN1- MT0W
MSV1-12HRDN1-MQ0W
MSV1-18HRDN1-MQ0W
1082mm
(42.60in)
207mm
(8.15in)
320mm
(12.60in)
MSV1-24HRDN1-MQ0W

13
LR
H
Model
R
L
H
Dimension of installation hole
MSV1-09HRFN1-MT0W
186mm
(7.32in)
150mm
(5.91in)
45mm
(1.77in)
Φ65mm(2.56in)
MSV1-12HRFN1- MT0W
MSV1-12HRDN1-MQ0W
MSV1-18HRDN1-MQ0W
138.5mm
(5.45in)
150mm
(5.91in)
45mm
(1.77in)
MSV1-24HRDN1-MQ0W

14
4.2 Outdoor Unit
More than 60cm(23.6in)
More than 70cm(27.6in)
More than 30cm(11.8in)
More than 60cm(23.6in)
(Service space)
Fence or
obstacles
More than 30cm(11.8in)
Note: The above drawing is only for reference. The appearance of your units may be different.
Model
W
D
H
W1
A
B
MOC-09HFN1-MT0W
760mm
(29.92in)
285mm
(11.22in)
590mm
(23.23in)
823mm
(32.40in)
530mm
(20.87in)
290mm
(11.42in)
MOC-12HFN1-MT0W
MOC-12HDN1-MQ0W
MOF-18HDN1-MQ0W
845mm
(33.27in)
320mm
(12.60in)
700mm
(27.56in)
908mm
(35.75in)
560mm
(22.05in)
335mm
(13.19in)
MOG-24HDN1-MQ0W
900mm
(35.43in)
315mm
(12.40in)
860mm
(33.86in)
980mm
(38.58in)
590mm
(23.23in)
333mm
(13.11in)

15
5. Refrigerant Cycle Diagram
INDOOR OUTDOOR
LIQUID SIDE
GAS SIDE
HEAT
EXCHANGE
(EVAPORATOR)
HEAT
EXCHANGE
(CONDENSER)
COMPRESSOR
2-WAY VALVE
3-WAY VALVE
CHECK VALVE
(Heating Model only)
CAPILIARY TUBE
REVERSING VALVE
(Heating Model only)
COOLING
HEATING
ACCUMULATOR

16
6. Wiring Diagram
6.1 Indoor Unit
MSV1-09HRFN1-MT0W, MSV1-12HRFN1-MT0W