Miller Electric Gyro Bail-15/25 User manual

OWNER’S MANUAL OM-714 147 531B
November 1998
Gyro Bail-15/25 (041 979)
ST-147 722-A / ST-800 191
WARNING
ELECTRIC SHOCK can kill.
•Do not touch live electrical parts.
•Turn Off spot welder and input disconnect device.
•Disconnect input power plug or conductors from
deenergizedsupply BEFORE moving spot welder.
MOVING PARTS can cause injury.
•Keep away from pinch points.
Part
No.
Item
No. Description (Qty)
1 601 926 Screw, 1/4-20 x 5/8 (4)
2 602 207 Washer, 1/4 lock (4)
3 147 530 Mounting Bracket LH (1)
4 147 529 Mounting Bracket RH (1)
5 147 527 Suspension Yoke (1)
6 110 510 Eye Bolt (1)
7 602 213 Washer, 3/8 split lock (5)
8 010 909 Nut, 3/8-16 (3)
9 601 871 Nut, 3/8-16 jam (7)
10 602 243 Washer, 3/8 flat (8)
11 142 156 Screw, 3/8-16 x 1-3/4 (2)
12 147 528 Gyro Bail Bracket (2)
13 601 965 Screw, 3/8-16 x 1 (5)
14 110 509 Ring (1)
15 024 665 Bearing (3)
16 602 221 Washer, 3/8 tooth lock (3)
Be sure to provide Model when ordering re-
placementparts.
Adjust the pivot point or tilt angle of
the spot welder by loosening the two
self-locking nuts (8) and sliding the
spot welder along the gyro bail
brackets (12).
Tools Needed:
3/8, 9/16, 5/8 in
5
12
3
4
6
8
11 10
9
21
7
8
7
10
13
14
15
16
7
9
13
9
12
Figure 1. Gyro Bail-15/25 Assembly