Milwaukee HEAVY DUTY M12 PL User manual

GB Original instructions
DOriginalbetriebsanleitung
FNotice originale
IIstruzioni originali
EManual original
PManual original
NL Oorspronkelijke gebruiksaanwijzing
DK Original brugsanvisning
NOriginal bruksanvisning
SBruksanvisning i original
FIN Alkuperäiset ohjeet
GR Πρωτότυπο οδηγιών χρήσης
TR Orijinal işletme talimatı
CZ Původním návodem k používání
click
click
click
click
click
click
click
click
click
click
click
click
click
click
SK Pôvodný návod na použitie
PL Instrukcjąoryginalną
HU Eredeti használati utasítás
SLO Izvirna navodila
HR Originalne pogonske upute
LV Instrukcijām oriģinālvalodā
LT Originali instrukcija
EST Algupärane kasutusjuhend
RUS
Оригинальное руководство по эксплуатации
BG
Оригинално ръководство за експлоатация
RO Instrucţiuni de folosire originale
MK Оригинален прирачник за работа
UKR Оригінал інструкції зексплуатації
AR
ﺔﯿﻠﺻﻷا تﺎﻤﯿﻠﻌﺘﻟا
click
click
click
click
click
click
click
click
click
click
click
click
click
click
M12 PL

1ENGLISH
CONTENTS
1 General informations...................................................................................................................................... 2
1.1 Additional safety and working instructions ............................................................................................. 2
1.2 Technical data ........................................................................................................................................ 2
1.3 Specified conditions of use .................................................................................................................... 2
1.4 Radio frequency interface requirements - related to European installation ........................................... 2
1.5 EC-declaration of conformity.................................................................................................................. 3
1.6 One-key™.............................................................................................................................................. 3
1.7 Batteries................................................................................................................................................. 3
1.8 Transporting lithium batteries................................................................................................................. 3
1.9 Maintenance........................................................................................................................................... 3
1.10 Symbols ................................................................................................................................................. 4
2 Overview ........................................................................................................................................................ 5
3 Installing and removing battery ...................................................................................................................... 6
4 Change ONEKEY battery .............................................................................................................................. 7
5 Setup.............................................................................................................................................................. 8
5.1 Power on/off........................................................................................................................................... 8
5.2 First time setup....................................................................................................................................... 8
5.3 Setup-symbols ....................................................................................................................................... 8
5.4 Language ............................................................................................................................................... 8
5.5 Frequency .............................................................................................................................................. 9
5.6 Speaker volume ..................................................................................................................................... 9
5.7 Backlight................................................................................................................................................. 9
5.8 Sound configuration ............................................................................................................................. 10
5.9 Units..................................................................................................................................................... 10
5.10 Auto power off...................................................................................................................................... 10
5.11 Self-test function .................................................................................................................................. 11
5.12 About screen........................................................................................................................................ 11
5.13 ONE-KEY............................................................................................................................................. 11
5.14 Battery Temperature............................................................................................................................. 11
6 Sonde Locating ............................................................................................................................................ 12
6.1 Navigating the
PIPELINE LOCATOR menu ............................................................................................ 12
6.2 Sonde locate screens .......................................................................................................................... 12
6.3 Sonde Signal........................................................................................................................................ 13
6.4 Set the mode and frequency of the
PIPELINE LOCATOR...............................................................................13
6.5 Locating the Sonde .............................................................................................................................. 14
7 Push Cable and Line Locating ..................................................................................................................... 15
7.1 Passive versus active locating ............................................................................................................. 15
7.2 Grounding Post .................................................................................................................................... 15
7.3 Applying the transmitter signal............................................................................................................. 16
7.4 The LINE TRACE Locate Screen......................................................................................................... 16
7.5 Tracing the Push Cable........................................................................................................................ 17
8 Passive Locating - Power & Radio............................................................................................................... 19
8.1 What is passive locating? .................................................................................................................... 19
8.2 Locating power or radio signals ........................................................................................................... 19
9 Firmware Updates........................................................................................................................................ 21

2ENGLISH
1 GENERAL INFORMATIONS
1.1 Additional safety and working instructions
Always check the work area before beginning a job. Do not allow the tool to contact electrical, chemical, or
moving hazards.
Do not try to replace the battery pack if the surface of the instrument is wet.
Do not dispose of used battery packs in the household refuse or by burning them. Milwaukee Distributors offer to
retrieve old batteries to protect our environment.
Do not store the battery pack together with metal objects (short circuit risk).
Use only System M12 chargers for charging System M12 battery packs. Do not use battery packs from other systems.
Battery acid may leak from damaged batteries under extreme load or extreme temperatures. In case of contact
with battery acid wash it offimmediately with soap and water. In case of eye contact rinse thoroughly for at least
10 minutes and immediately seek medical attention.
Warning! To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse
your tool, battery pack or charger in fluid or allow a fluid to flow inside them. Corrosive or conductive fluids, such
as seawater, certain industrial chemicals, and bleach or bleach containing products, etc., Can cause a short
circuit.
This appliance is not intended to be used or cleaned by persons with reduced physical, sensory or mental
capabilities, or lack of experience or knowledge, unless they have been given instructions concerning the safe
use of the appliance by a person legally responsible for their safety. They should be supervised whilst using the
appliance. Children shall not use, clean or play with this appliance, which when not in use should be secured out
of their reach.
Chemical Burn Hazard. This device contains a lithium button/coin cell battery. A new or used battery
can cause severe internal burns and lead to death in as little as 2 hours if swallowed or enters the
body. Always secure the battery cover. If it does not close securely, stop using the device, remove the
batteries, and keep it away from children. If you think batteries may have been swallowed or entered
the body, seek immediate medical attention.
1.2 Technical data
Battery voltage ....................................................................................................... 12 V
Weight according EPTA-Procedure 01/2014 (2.0 ... 6.0 Ah)..................... 2.56 ... 2.8 kg
Frequency band(s) of Bluetooth................................................................ 2402-2480 MHz
Radio-frequency power......................................................................................... 1.8 dBm
Bluetooth version ........................................................................................ 4.0 BT signal mode
Recommended ambient operating temperature.............................................. -18 …. +50 °C
Recommended battery Type ................................................................................ M12B...
Recommended charger Type..................................................................C12C, M12C4, M12-18...
1.3 Specified conditions of use
The PIPELINE LOCATOR is designed to locate the sonde position and trace the push cable of
the Milwaukee PIPELINE INSPECTION SYSTEMS REEL.
Do not use this product in any other way as stated for normal use.
1.4 Radio frequency interface requirements - related to European installation
Note: This equipment has been tested and found to comply with the limits for a EN 300 440 v2.1.1 receiver
Category 3.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
This equipment is sensitive to other equipment that intentionally generates, radio frequency energy in the 2402-
2480MHz that may conduce to the instability to use the remote control on it. However there is no guarantee that
interference will not occur in a particular installation. If this equipment suffer from the harmful interference from
another radio device to radio this can be determined by turning the respective equipment offand on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Turn offthe disturbance equipment
- Increase the separation between the disturbance equipment
- Consult the dealer or an experienced radio technician for help

3ENGLISH
1.5 EC-declaration of conformity
Hereby, Techtronic Industries GmbH declares that the radio equipment type M12 PL is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet
address: http://services.milwaukeetool.eu.
1.6 One-key™
To learn more about the ONE-KEY functionality for this tool, please reference the Quick Start guide included with
this product or go to www.milwaukeetool.com/one-key. To download the ONE-KEY app, visit the App Store or
Google Play from your smart device.
Also, when the product experiences ESD, the Bluetooth communication will be disconnected. It needs to be reset
manually to recover.
We considered the results to be within our minimum acceptable performance level according to EN 55014-2:2015
/ EN 301489-1 V2.2.3/ EN 301489-17 V3.1.1.
One-key™ indicator
Solid Blue: Wireless mode is active and ready to be configured via the ONE-KEY™ app.
Blinking Blue: Tool is actively communicating with the ONE-KEY™ app.
Blinking Red: Tool is in security lockout and can be unlocked by the owner via the ONE-KEY™ app.
1.7 Batteries
Battery packs which have not been used for some time should be recharged before use.
Temperatures in excess of 50°C (122°F) reduce the performance of the battery pack. Avoid extended exposure to
heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs have to be fully charged, after used.
To obtain the longest possible battery life remove the battery pack from the charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 27°C and away from moisture
Store the battery packs in a 30% - 50% charged condition
Every six months of storage, charge the pack as normal.
1.8 Transporting lithium batteries
Lithium-ion batteries are subject to the Dangerous Goods Legislation requirements.
Transportation of those batteries has to be done in accordance with local, national and international provisions
and regulations.
• The user can transport the batteries by road without further requirements.
• Commercial transport of Lithium-Ion batteries by third parties is subject to Dangerous Goods regulations.
Transport preparation and transport are exclusively to be carried out by appropriately trained persons and the
process has to be accompanied by corresponding experts.
When transporting batteries:
• Ensure that battery contact terminals are protected and insulated to prevent short circuit.
• Ensure that battery pack is secured against movement within packaging.
• Do not transport batteries that are cracked or leak.
Check with forwarding company for further advice
1.9 Maintenance
Use only Milwaukee accessories and spare parts. Should components need to be replaced which have not been
described, please contact one of our Milwaukee service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state the machine type printed as well as the
six-digit No. on the label and order the drawing at your local service agents or directly at: Techtronic Industries
GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.

4ENGLISH
1.10 Symbols
CAUTION! WARNING! DANGER!
Remove the battery pack before starting any work on
the machine.
Please read the instructions carefully before starting
the machine.
Do not allow the battery to contact corrosive or
conductive fluid.
To prevent electric shock, do not allow product to
contact live electrical parts.
Do not swallow the coin cell battery!
Do not dispose electric tools, batteries/rechargeable
batteries together with household waste material.
Electric tools and batteries that have reached the end
of their life must be collected separately and returned
to an environmentally compatible recycling facility.
Check with your local authority or retailer for
recycling advice and collection point.
VVolts
Direct current
European Conformity Mark
Ukraine Conformity Mark
EurAsian Conformity Mark

5ENGLISH
2 OVERVIEW
1
2
3
4
5
6
7
8
10
12
9
11
13
1 LCD
2 Battery compartment
3 Speaker
4 ONEKEY LED
5 Locator stem
6 Menu button
7 Mode button
8 Up button
9 Down button
10 Power button
11 Select button
12 Mini USB port
13 ONEKEY battery compartment

6ENGLISH
3 INSTALLING AND REMOVING BATTERY
1
2
click
1
2

7ENGLISH
4 CHANGE ONEKEY BATTERY
1
2
3

8ENGLISH
5 SETUP
This section of the manual covers setting up the features and options of the PIPELINE LOCATOR.
5.1 Power on/off
Press the POWER button to power on the PIPELINE LOCATOR.
The buttons will illuminate, showing that the power is on.
Press the POWER button for 2 seconds to power offthe PIPELINE LOCATOR.
The PIPELINE LOCATOR will shut offautomatically after the time selected in the settings menu.
A signal sounds for 20 seconds, then shut off.
5.2 First time setup
All the settings are saved into the PIPELINE LOCATOR memory and will remain there until changed. The initial
settings will set the FREQUENCIES, VOLUME, BACKLIGHT TIMERS, SOUND CONFIGURATION, UNITS OF
MEASURE, POWER TIMER, and LANGUAGE
5.3 Setup-symbols
Press the button
go to...
MENU button - enter the menu options. Also, use to step back (return) to the previous screen.
MODE button - toggle through the selected locate modes and their selected frequencies
UP and DOWN navigation button - move vertically through the menu and to lower and raise
the sensitivity while locating.
SELECT button - press to accept the menu options
POWER button - turn on and offthe PIPELINE LOCATOR
5.4 Language
It is recommended to set your LANGUAGE first so that the other menus can be easily read and understood.
1. SETTINGS
2. LANGUAGE
3. 
Bulgarian
Arabic
English
German
Dutch
4. English
5.
512 Hz
3
Bulgarian
Arabic
English
German
Dutch
ABOUT
Frequency
Speaker Volume
Backlight
Sound Conguration
Units
Auto Power O
Self test
Language
Meter
5 min
English
About

9ENGLISH
5.5 Frequency
The option sets the PASSIVE, ACTIVE, and SONDE frequencies.
1. SETTINGS
2. FREQUENCY
3. 
4.
5. /
6.
5.6 Speaker volume
1. SETTINGS
2. SPEAKER VOLUME
3.
4. 
5.
6.
5.7 Backlight
1. SETTINGS
2. BACKLIGHT
3.
4. 
5.
6.
33kHz
512 Hz
640 Hz
33 kHz
33 kHz
83 kHz
50 Hz
60 Hz
RF
FREQ SETTINGS
512 Hz
3
SETTINGS
Frequency
Speaker Volume
Backlight
Sound Conguration
Units
Auto Power O
Self test
Language
About
Meter
5 min
English
512 Hz
3
SETTINGS
Frequency
Speaker Volume
Backlight
Sound Conguration
Units
Auto Power O
Self test
Language
About
Meter
5 min
English