Mindeo MP80 Series User manual

MP80xx Image Platform
User Manual
Version: MP80xx_UM_EN_V1.1.4

i
NOTICE
Warning: Ensure that the optional DC adapter works at +5V, especially for the RS-232 interface
cable.
1. All software, including firmware, furnished to the user is on a licensed basis.
2. The right is reserved to make changes to any software or product to improve reliability, function, or
design.
3. The material in this manual is subject to change without notice.
4. A standard packing includes an image platform, a USB cable, a 5V adaptor and a CD (or a user
manual).
5. Optional accessories include a stand, a PS2 cable and a RS-232 cable.

ii

iii
Contents
NOTICE ................................................................................................................................................. i
1 Technical specifications......................................................................................................................1
2 Cable connector pin-outs descriptions ................................................................................................2
3 Default setting for each barcode .........................................................................................................3
4 Dimensions & Field of view................................................................................................................. 4
5 Parts of image platform ......................................................................................................................7
6 Introduction to installation ................................................................................................................... 8
6-1 Installation - keyboard wedge .........................................................................................................8
6-2 Installation - RS-232 .......................................................................................................................9
6-3 Installation - USB............................................................................................................................9
7 Parameter menus.............................................................................................................................10
7-1 Single-parameter setting by scanning barcodes...........................................................................10
7-2 Operate the image platform by receiving command via UART .....................................................11
7-3 Interface selection.........................................................................................................................12
7-4 Keyboard wedge interface ............................................................................................................13
7-5 RS-232 interface...........................................................................................................................17
7-6 USB interface ...............................................................................................................................19
7-7 Scan mode & Some global settings..............................................................................................22
7-8 LED and Beeper Indication...........................................................................................................27
7-9 LED illumination level ...................................................................................................................29
7-10 Multi-symbols read......................................................................................................................30
7-11 UPC-A ........................................................................................................................................31
7-12 UPC-E ........................................................................................................................................33
7-13 UPC-E1 ......................................................................................................................................35
7-14 EAN-13 (ISBN/ISSN) ..................................................................................................................37
7-15 EAN-8 .........................................................................................................................................39
7-16 Code 39 (Code 32, Trioptic Code 39).........................................................................................41
7-17 Interleaved 2 of 5........................................................................................................................44
7-18 Industrial 2 of 5 (Discrete 2 of 5).................................................................................................46
7-19 Matrix 2 of 5................................................................................................................................47
7-20 Codabar......................................................................................................................................48
7-21 Code 128 ....................................................................................................................................50

iv
7-22 UCC/EAN 128 (GS1-128)...........................................................................................................52
7-23 ISBT 128.....................................................................................................................................54
7-24 Code 93 ......................................................................................................................................55
7-25 Code 11 ......................................................................................................................................56
7-26 MSI/Plessey................................................................................................................................58
7-27 UK/Plessey .................................................................................................................................60
7-28 China Post ..................................................................................................................................61
7-29 China Finance ............................................................................................................................62
7-30 GS1 DataBar (GS1 DataBar Truncated).....................................................................................64
7-31 GS1 DataBar Limited..................................................................................................................65
7-32 GS1 DataBar Expanded .............................................................................................................66
7-33 G1-G6 & C1-C3 & FN1 substitution string setting.......................................................................67
7-34 G1-G4 string position & Code ID position ...................................................................................72
7-35 String transmission .....................................................................................................................73
8 Test barcode symbols ......................................................................................................................76
9 Maintenance..................................................................................................................................... 78
10 Assembling the stand ..................................................................................................................... 79
11 ASCII Table.................................................................................................................................... 80
12 Barcode representing non-printable character ................................................................................81
13 Return default parameters & firmware version ................................................................................ 82
14 Configuration alphanumeric entry barcode .....................................................................................83

1
1 Technical specifications
Table 1-1 Image platform technical specifications
Input voltage
5 VDC ±0.25V
Power
5.00W (working); 0.40W (standby)
Current
1000mA (working); 80mA (standby)
Image size
1280× 960 pixels
Scanning angle
±60°, ±40°, 360°(Skew, Pitch, Roll)
Decode capability
UPC-A, UPC-E, UPC-E1, EAN-13, EAN-8, ISBN (Bookland EAN), ISSN,
Code 39, Code 39 full ASCII, Code 32, Trioptic Code 39, Interleaved 2 of 5,
Industrial 2 of 5 (Discrete 2 of 5), Matrix 2 of 5, Codabar (NW7), Code 128,
UCC/EAN 128 (GS1-128), ISBT 128, Code 93, Code 11 (USD-8),
MSI/Plessey, UK/Plessey, China Post, China Finance, GS1 DataBar
(formerly RSS) variants
Indicator
Beeper, LED
Interface supported
Keyboard wedge, RS-232, USB Keyboard, USB virtual COM
Dimensions
Height × Width × Depth：152mm ×81mm ×144mm (without stand);
152mm ×112mm ×184mm (with stand);
Weight
543g (without stand, without cable);
810g (with stand , without cable);
Cable
Straight 2.0m
Connector type
RJ-45 phone jack connector
Case material
PC+TPU
Temperature
0°to 50°C (32°to 122°F), Operating; -40°to 70°C (-40°to 158°F), Storage
Humidity
5% to 95% (non-condensing)
Programming method
Manual (reading special barcode)
Program upgrade
Online
Min. element width
4mil, 1mil = 0.0254mm
Decoding depth
4mil Code39 (9 chars):
5mm-60mm
5mil Code39 (3 chars):
0mm-100mm
10mil Code39 (3 chars):
0mm-148mm
13mil UPC (6 chars):
0mm-170mm
15mil Code39 (1 chars):
0mm-193mm
20mil Code39 (1 chars):
0mm-220mm
Safety
EMC: EN55022, EN55024
Electrical safety: EN60950-1
Photobiological safety: EN62471:2008
Illumination: 0~100,000LUX
Protection class: IP52
Drop resistance: 1.5m (5.0ft) drops to concrete

2
2 Cable connector pin-outs descriptions
Figure 2-1 Cable connector interface pin-outs
The pin-outs descriptions in Table 2-1 apply to the cable connector on the image platform and are for
reference only.
Table 2-1 Cable connector pin-outs descriptions
Pin
RS232
Keyboard (PS2)
USB
1
Power (+5V)
Power (+5V)
Power (+5V)
2
+3.3V ( for interface auto
selection purpose)
Ground (for interface auto
selection purpose)
+3.3V (for interface auto
selection purpose)
3
Ground
Ground
Ground
4
+3.3V ( for interface auto
selection purpose)
Reserved
Ground (for interface auto
selection purpose)
5
TxD
KeyClock
Reserved
6
RxD
KeyData
Reserved
7
Reserved
TermClock
Reserved
8
Reserved
TermData
Reserved
9
CTS
Reserved
D-
10
RTS
Reserved
D+
Note: Voltage level of all RS232 Pin-outs (RxD, TxD, CTS and RTS) is 0V for logic low and 3.3V for logic
high.

3
3 Default setting for each barcode
Table 3-1 Default setting for each barcode
Code type
Read
enable
Check digit
verification
Check digit
transmission
Min. code
length
Proprietary
code ID
AIM
code ID
UPC-A
√
√
√
(12)2
A
]Em
UPC-E
√
√
√
(8)2
D
]Em
UPC-E1
√
√
√
(8)2
D
]X0
EAN-13
√
√
√
(13)2
A
]Em
EAN-8
√
√
√
(8)2
C
]E4
ISBN (Bookland
EAN)/ISSN1
√
√
√
(13)2
B
]Em
Code 39
√
-
-
1
M
]Am
Interleaved 2 of 5
√
-
-
6
I
]Im
Industrial 2 of 5
-
-
-
4
H
]S0
Matrix 2 of 5
√
-
-
6
X
]X0
Codabar
√
-
-
4
N
]Fm
Code 128
√
√
-
1
K
]Cm
UCC/EAN 128 (GS1-128)
√
√
-
1
K
]Cm
ISBT 128
√
√
-
1
K
]Cm
Code 93
√
√
-
1
L
]Gm
Code 11
-
√
-
4
V
]H3
MSI/Plessey
-
-
-
4
O
]Mm
UK/Plessey
-
√
-
1
U
]Mm
China Post
√
-
-
(11)2
T
]Im
China Finance
√
-
-
(10)2
Y
-
GS1 DataBar
√
-
-
(16)2
R
]em
GS1 DataBar Truncated3
√
-
-
(16)2
R
]em
GS1 DataBar Limited
√
-
-
(16)2
R
]em
GS1 DataBar Expanded
√
-
-
1
R
]em
Note:1 The settings for ISBN/ISSN and EAN-13 must be the same except the code ID.
2Fixed-length barcodes.
3 The settings for GS1 DataBar Truncated and GS1 DataBar must be the same.

4
4 Dimensions & Field of view
Figure 4-1 Dimensions (without stand)
Figure 4-2 Dimensions (with stand)