Mini Gadgets BB2KGARAGE User manual

1Version 1.0
BB2KGARAGE DVR
Hidden Camera Manual

2Version 1.0
THANK YOU FOR PURCHASING THE
BB2KGARAGE DVR HIDDEN CAMERA
Please read this manual before operating the
camera and keep it handy.
Your purchase should include:
●1 x BB2KGARAGE DVR Camera
●1 x AC Wall Charger
●1 x 8Pin Mini USB Cable
●1 x 128GB MicroSD Card
●1 x MicroSD Card Reader
●1 x Manual
●1 x Remote

3Version 1.0
GET FAMILIAR WITH YOUR BB2KGARAGE DVR
HIDDEN CAMERA

4Version 1.0

5Version 1.0
IMPORTANT WARRANTY INFORMATION: If the
warranty sticker on your device has been
removed or tampered with, your lifetime
warranty will be voided. You may be charged
fees or denied a return should this happen.
HOW TO CHARGE THE CAMERA
Note: If you are not located in the US, or if you
intend to use this product anywhere other than
the US, you will need to purchase a converter in
order to use the AC wall plug in and avoid
damaging the product. Because different
countries use different voltages in their
electrical wiring, you will need a converter that
adapts to the current in your particular country.
1. Connect the smaller end of the USB
cable to unit and the other end into the

6Version 1.0
included AC wall charger, then plug the
charger into a functional electrical
outlet.
2. Allow the device to charge 6-8 hours
OPERATING THE CAMERA
HOW TO TURN ON THE CAMERA
1. Once the device is finished charging,
unplug it from the charging cable.
2. Hold the Power Button (A) on the for 3s
and let go. The LED will turn on for a
second, then flash for a second, and
then blink 4 times and go out. The
device is now in 3K Continuous
Recording mode.

7Version 1.0
3. To return to standby mode and choose
a different recording option, press the
3K Continuous Recording button (B) on
the remote. The LED will flash to
indicate the device is saving the current
recording and then the LED will turn on
solid for Standby mode.
NOTE: If the light does not turn on, make sure
you are holding and releasing the power
button for 3 seconds.
HOW TO RECORD 3K CONTINUOUS VIDEO
1. When the camera is in Standby Mode,
press the “3K Continuous Recording
Button.” (B) The Indicator LED will
quickly flash 4 times and then go out.

8Version 1.0
2. Once the Indicator LED turns off, the
camera is now recording 3K resolution
video continuously.
HOW TO STOP RECORDING VIDEO
1. While the camera is recording video,
press the “3K Continuous Recording
Button” once more. (The Indicator LED
will turn back on and be solid.)
2. The camera has now stopped recording
and is now in Standby Mode.
HOW TO TAKE PICTURES
1. When the camera is in Standby Mode,
press and hold the “Photo Button” (C)
for 3 seconds and let go once the LED
turns off. The LED will remain off while
the photo is being taken.

9Version 1.0
2. Once the photo is taken, the light will
turn back to a solid and the device will
return to standby mode.
HOW TO RECORD MOTION DETECTION
1. When the camera is in Standby Mode,
quickly press the “Motion Detection
Button” once (D).
a. Do NOT hold or the device will
format the microSD card.
2. The LED will stay on until the device
detects motion.
3. Once the device detects motion, the
LED will flash 4 times and then go out.
The device is now recording video.
4. If there is no motion after 1 minute, the
device will return to detection standby

10Version 1.0
mode until motion is detected again.
While waiting, the LED light will be on.
HOW TO STOP RECORDING MOTION
DETECTION
1. While the camera is recording motion
detection, press the “Motion Detection
Button” (D) quickly once more. (The LED
will flash to indicate the unit is saving
the current recording, and then the LED
will turn back on.)
2. The camera has stopped recording
motion detection and is now in Standby
Mode.