Mitsubishi Electric CITY MULTI PAR-40MAAU User manual

Job Name:
System Reference: Date:
Specications are subject to change without notice. © 2020 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.
Model: PAR-40MAAU Deluxe MA Remote Controller
• ON/OFF
- Switches between ON and OFF.
• Operation mode switching
- Switches between Cool/Dry/Fan/Auto/Setback/Heat.
• Hold
- Switches between enable and disable the Hold function.
- If the Hold function is enable, the following functions will be
prohibited.
- ON/OFF timer/Schedule (Weekly timer) /Auto return/Auto-
OFF timer
• Temperature setting
- Changes the set temperature.
- Set temperature range varies depending on the indoor unit
model.
• Fan speed setting
- Changes fan speed.
- Available fan speeds vary depending on the model.
• Air ow direction setting
- Changes airow direction.
- Available airow directions vary depending on the model.
• Louver setting
- Switches between louver ON/OFF.
• Ventilation equipment control
- Interlocked setting and interlocked operation setting with City
Multi Lossnay units can be performed.
- The Stop/Low/High settings of the ventilation equipment can
be controlled.
• Main display mode setting
- The Main display can be displayed in two different modes:
“Full” and “Basic.”
OPERATION/DISPLAY
FULL VIEW BASIC VIEW
• B&W inversion
- The colors of the display can be inverted, turning white
background to black and black characters to white.
• Clock *2
- Date (year/month/day) and time (hour/minute) can be set.
- The set time as well as the day of the week will be displayed
on the Main display.
- It is also possible for the time to not display on the main
display.
- The clock can be displayed in 12-hour format (AM/PM before
or after the time) and 24-hour format.
• Daylight saving time
- The start/end time for daylight saving time can be set.
- The daylight saving time function will be activated based on
the setting contents.
• Room temp. display
- The room temperature display can be enabled or disabled.
• Error information
- When an error occurs, an error code and the unit address
appear.
- The air-conditioning unit model, serial number, and contact
number can be set to appear when an error occurs. (The
above information needs to be entered in advance.)
• Filter information
- A lter sign will appear when it is time to clean the lter.
• Remote controller information
- The version of the remote controller can be checked.
*1 This function is active only for the units that support the function.
*2 The clock is accurate within 45 seconds per month (at the temperature of 77°F
[25ºC]).
The clock is backed up for 3 days.

Specications are subject to change without notice. © 2020 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.
Model: PAR-40MAAU
SYSTEM EXAMPLE
*When a PAR-40MAAU is connected to a group, no other MA remote
controllers can be connected to the same group.
Deluxe MA
remote
controller
Non-polarized
2-wire
Non-polarized
2-wire
Deluxe MA
remote
controller
SCHEDULE AND TIMER SETTING
• Timer
- ON/OFF timer
◦Turns ON and OFF daily at a set time.
◦Time can be set in 5-minute increments.
◦It is also possible to set the ON time only or the OFF time
only.
- Auto-OFF timer
◦Turns off the unit after a certain period of operation.
◦Operation time can be set to a value from 30 to 240
minutes in 10-minute increments.
• Weekly timer
- Weekly ON/OFF times and set temperatures can be set.
- Time can be set in 5-minute increments. Up to 8 schedule
patterns can be set per day of the week.
- Not valid when the ON/OFF timer is set.
RESTRICTION SETTINGS
• Allows/disallows local operation
- The following operation can be prohibited by applying certain
settings on the centralized controller: ON/OFF, operation
mode, set temperature, lter sign reset, air direction, fan
speed and timer.
- While an operation is prohibited, the operation icon lights up
(only on the Main display in the “Full” mode).
• Operation lock
- The following operations can be prohibited: Sensing
Location, ON/OFF, Mode, Set temp., Menu, Fan, Louver,
Vane, or Hold
• Temperature range restriction
- The room temperature range for each operation mode can
be restricted.
• Auto return
- The units operate at the preset temperature after a
designated period.
◦Time can be set to a value from 30 to 120 minutes in
10-minute increments.
- Not valid when the temperature setting range is restricted.
• Password
- Administrator password (required for schedule setting
etc.) and Maintenance password (required for test run and
function setting etc.) can be set.
MISCELLANEOUS ITEMS
• Language Selection
- Select the display language from the following 3 languages.
◦English, French, Spanish
• Brightness Contrast
- The brightness of the LCD can be adjusted. The contrast of
the LCD can be adjusted.
• Manual Vane Angle *1
- Fixes the vane position for each air outlet.
• Service *1
- Contains Test run, Function setting, Request code, and Error
history.
• 3D i-see Sensor
- Settings for 3D i-see Sensor can be made.
ENERGY SAVING OPTION
• No occupancy energy save
- Requires 3D i-see sensor on applicable indoor units
• Room Occupancy energy save
- Requires 3D i-see sensor on applicable indoor units
• No occupancy Auto-OFF
- Requires 3D i-see sensor on applicable indoor units
• Setback Mode
*1 This function is active only for the units that support the function.
*2 The clock is accurate within 45 seconds per month (at the temperature of 77°F
[25ºC]).
The clock is backed up for 3 days.

1340 Satellite Boulevard. Suwanee, GA 30024
Toll Free: 800-433-4822 www.mehvac.com
© 2020 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.
Specications are subject to change without notice.
M_ Submittal_PAR-40MAAU 03-2020
Model: PAR-40MAAU
DIMENSIONS
SPECIFICATIONSCOMPATIBILITY CHART
Product size
(W x H x D)
In.
(mm)
4 3/4 x 4 3/4 x 0.57
(120 x 120 x 14.5)
Net Weight Lbs.
(kg)
9/16
(0.25)
Rated Power
Supply Voltage
12 VDC
(supplied from indoor units)
Power
Consumption W 0.3
Usage
Environment
Temperature: 0 to 40º C (32 to 104º F)
Humidity: 30 to 90%RH
(with no condensation)
Material
Panel PMMA
Main
body PC + ABS
Sound
Pressure
Level
dB(A) <70 [A-weighted sound pressure level]
*1 Per Machinery Directive 2006/42/EC
CITY MULTI®M-Series P-Series
PMFY-NBMU Yes MFZ-KA MAC-334 PCA Yes
PEFY-NMU Yes MFZ-KJ MAC-334 PEA Yes
PEFY-NMAU Yes MSZ/Y-A No PEAD Yes
PEFY-NMHSU Yes MSZ/Y-D NA: No
NA-8: MAC-334 PKA Yes
PEFY-NMLU Yes MS-WA No PLA Yes
PEFY-NMSU Yes MSZ-FD No PVA Yes
PLFY-NAMU Yes MSZ-FE
09(12)NA: No
09(12)NA-8: MAC-334
18NA: Yes1
PLFY-NBMU Yes MSZ/Y-GE
06(-18)NA: No
NA-8: MAC-334
NA-9: MAC-334
GE24NA: MAC-334
PLFY-NCMU Yes MSZ/Y-GL MAC-334
PLFY-NEMU Yes MSZ-FH MAC-334
PLFY-NFMU Yes MSZ-HE No
PLFY-NLMU Yes MSZ-HM MAC-334
PCFY-VKM Yes MVZ-AA4 Yes
PCFY-NGMU Yes MVZ-AA7 Yes
PCFY-NKMU Yes SVZ-KP Yes
PFFY-NEMU Yes SEZ-KD No
PFFY-NRMU Yes SEZ-KD4 Yes
PVFY-E00 Yes SLZ-KA Yes
PVFY-NAMU Yes SLZ-KF Yes
PKFY-NAMU Yes MLZ-KP MAC-334
PKFY-NFMU Yes Note: MAC-334 indicates that the unit
requires a MAC-334IF-E Adapter in order
to use the PAR-40MAAU
PKFY-NGMU Yes
PKFY-NBMU Yes
PKFY-NHMU Yes
PKFY-NKMU Yes
(Front view) (Side view) (Rear view) Unit: mm [in.]
]46/73[5.41]23/32-4[021
]23/32-4[021