Mitsubishi WRK20MB2 User manual

WRK20MB2
WRK26MB2
WRK35MB2
WRK53MB2

過

1
7
8
13
16
17
CAUTION
1.Contact the authorised service technician for repair or maintenance of
this unit.
2.Contact the authorised service technician for installation of this unit.
3.The air conditioner is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have been given supervision
or instruction concerning use of appliance by a person responsible for their
safety.
4.Children should be supervised to ensure that they do not play with the
air conditioner.
5.If the power cord is damaged, it must be replaced by the manufacturer,
the authorised service technician or qualified person in order to avoid a
hazard.
6.Make sure the unit power and the circuit breaker are turned off before
cleaning and maintenance.

符合
18
21
22
26
29
30

1

2

3

4

5
pets

NOTE:It may be condensed water on the surface of unit if humidity
(RH) operation setting of unit is high than 80% however room
humidity(RH) lower than 80% .
6

7

8

COOL MODE
The desired cool setting is selected by rotating the
knob to the right to the appropriate location.
“HIGH COOL” has maximum cooling effect and
airflow.
“MED COOL” has the intermediate cooling effect
and airflow.
“LOW COOL” has minimum cooling effect and
airflow.
“OFF” will completely shut off the unit.
FAN MODE
“HIGH FAN” permits high fan speed operation
without cooling effect.
“MED FAN” permits med fan speed operation
without cooling effect.
“LOW FAN” permits low fan speed operation
without cooling effect.
“FAN” permits high fan speed operation without
cooling effect.
Note: When selecting a fan speed, the compressor
will not run.
Models
Model
9

10

11

12

13

14