Mizuho SUSANO Pad User manual

Flame-Retardant and Waterproof Pad
(SUSANO Pad)
Operator's Manual
This product is designed for medical operations. Using this product for any other purpose
other than this intended use may cause serious injury.
The operator and the person in charge of the maintenance of this product must read
this operator's manual thoroughly and understand the contents before using, inspecting,
adjusting and maintaining it.
Keep this manual for reference in a place where is readily accessible.
MES-CK18-042-01EN Ver.1 2023-05-24

Table of contents
1. Introduction ………………………………………………………… 1
1.1 This manual ……………………………………………………………………… 1
1.2 Intended use and this product ………………………………………………… 2
1.3 Warranty ………………………………………………………………………… 2
2. Component ………………………………………………………… 3
3. Labeling ………………………………………………………… 5
4. Attachment method ……………………………………………… 6
5. Maintenance and inspection …………………………………… 7
5.1 Inspection before and after use ……………………………………………… 7
5.2 Cleaning and disinfection ……………………………………………………… 7
5.3 Maintenance and inspection …………………………………………………… 7
5.4 Disposal ………………………………………………………………………… 7
6. Specication ……………………………………………………… 8

1
1
Introduction
1. Introduction
1.1 This manual
This manual contains information for safely and e󰀨ectively using this product.
Before using this product, read this manual thoroughly to understand how to use and inspect the product.
Failure to follow these instructions could lead to serious injury.
The safety information is categorized as per the following so that the contents of warnings and cautions may
be comprehended.
WARNING
If this indication is ignored and the product is incorrectly used, serious injury or
death may result.
CAUTION
If this indication is ignored and the product is incorrectly used, injury and/or damage
to property may result.
The warning and caution notices on this manual relating to using and inspecting, apply to the intended use
(surgical operations) of this product.
If the product is used for purposes other than surgery, the user is responsible in regard to safety for
performing operations and inspections which are not contained in this manual.

2
1
Introduction
1.2 Intended use and this product
This product is the accessory that is supplied with the operating table, and it is used to support the patient
when xing the patient’s position.
This product is to be used by health care professionals, including but not limited to surgeons, nurses and
biomedical technicians.
WARNING
When using the accessories to secure a patient’s body position, always observe
the patient’s condition. Being in the same position for long periods of time causes
neuroparalysis or bedsores.
CAUTION
• Do not use the table pad on the operating tables manufactured by third party
companies.Ithasnotbeenconrmedwhetheritcanbeusedwiththeoperating
tables manufactured by third party companies.
• Do not immerse the table pad in disinfectant solutions for a long time. It may cause
degradation.
• For hygiene, be sure to use sterilized drapes on the areas on the table pad where
the patient comes into contact with it.
• Before using the table pad, check that there is not any foreign matter or dirt on it.
• Do not apply tape, etc. directly on the table pads. Otherwise, they may get damaged.
•Placeandstorethetablepadsinatplaces.Leaningorbendingmaygetdeformed
or damaged.
• Do not store operating table accessories or other medical devices, etc. on the table
pads. Otherwise, they may get deformed or damaged.
• The table pads maintain waterproofness when they are properly attached in their
usage. If the table pads are attached other than the proper placement method in
theirusage,andliquidsinltrateinside,itmaycausedegradation.
• When cleaning the table pads, take care not to get liquids on the fasteners. If liquids
getonthewaterprooffasteners,wipethemo󰀨quickly.
If the waterproof fastener gets wet and the liquids
inltrateinside,itmaycausedegradation.
• Do not open the table pads waterproof fastener.
Ifliquidsinltrateinside,itmaycausedegradation.
1.3 Warranty
MIZUHO Corporation will repair defective parts of this product without charge for one year from the date
of delivery/installment except for cases of damage caused by a third party’s repair, act of nature, improper
use or intentional damage. All other warranty terms and conditions are subject to regulations of MIZUHO
Corporation.
Waterproof
fastener

3
2
Component
2. Component
 Flame-Retardant and Waterproof Pad (SUSANO Pad)
The types of Flame-Retardant and Waterproof Pad (SUSANO Pad) which are covered in this manual are as
per the following.
b1b2
(1) (2) (3) (4) (5)
(6) (7) (8)
(9) (10) (11) (12)
(13) (14) (15) (16)
(17)
Operator’s manual

4
2
Component
Product code Product description No. Material
18-042-01 SUSANO Pad for Head Section Type A (1)
Polyurethane
18-042-02 SUSANO Pad for Head Section Type B (9)
18-042-11 SUSANO Pad for Back Section Type A (2)
18-042-12 SUSANO Pad for Back Section Type B (10)
18-042-13 SUSANO Pad for Back Section Type C (13)
18-042-22 SUSANO Pad for Seat Section Type A (3)
18-042-23 SUSANO Pad for Seat Section Type B (7)
18-042-24 SUSANO Pad for Seat Section Type C (11)
18-042-25 SUSANO Pad for Seat Section Type D (14)
18-042-26 SUSANO Pad for Seat Section Type E (15)
18-042-42 SUSANO Pad for Back and Seat Section Type A (6)
18-042-44 SUSANO Pad for Back and Seat Section Type C (17)
18-042-52 SUSANO Pad for Double Leg Section Type A (4)
18-042-53 SUSANO Pad for Double Leg Section Type B (5)
18-042-54 SUSANO Pad for Double Leg Section Type C (16)
18-042-61 SUSANO Pad for Single Leg Section Type A (8)
18-042-62 SUSANO Pad for Single Leg Section Type B (12)

5
3
Labeling
3. Labeling
This product is labeled on the product surface shown as below.
Before use, make sure to understand the contents of the labels.
(4) (3) (2)
(1)
(1) PIN 558K8M1 (2) PIN 558K8M2 (3) PIN 558K6M1 (4) PIN 558K5M1
* The above gure is the reference example. The actual product shapes, label positions and PIN codes may
di󰀨er from the reference example.
 Symbol mark for labeling
Symbol Description Label no.
Debrillation - proof Type B applied part (1) (2) (3) (4)
Manufacturer (1) (2) (3) (4)
Conforms to BS 7177:2008 for medium hazard (1) (2) (3) (4)

6
4
Attachment method
4. Attachment method
This product’s attachment method is as per the following.
WARNING
Make sure to always securely attach the table pads to the operating table so that they
donotcomeo󰀨.Thetablepadsmaycomeo󰀨,andthepatientmaygetinjured.
CAUTION
Attach the table pads straight along the Velcro fastenings from the edges. Attach
especially long table pads while holding them with your hands so that the surfaces
do not get wrinkled. If the table pads rise up or buckle, they may get deformed or
damaged.
 How to attach the table pad to the operating table
1. Fix the table pad (2) onto the Bakelite board (1) with the Velcro fastening.
(1)
(2)

7
5
Maintenance and inspection
5. Maintenance and inspection
5.1 Inspection before and after use
Inspect the table pad for whether there is any damage before and after use.
5.2 Cleaning and disinfection
After using the table pad, make sure to follow the steps below to clean up and disinfect the table pad.
1. Detach all the table pads from the operating table.
2. Use a lint-free cloth soaked with proper volume of disinfectant to wipe o󰀨 the upper, side, and back side
of the table pads.
3. Wipe o󰀨 the table pad with a clean dry cloth within 15 minutes after disinfecting it.
Make sure to use Mizuho authorized disinfectants. The disinfectants are as shown below.
Chemical name Density
a) Sodium hypochlorite
0.1%
b) Hypo Alcohol 10%
c) Chlorhexidine gluconate 0.5%
d)
Benzalkonium chloride 10%
e) Ethanol 80%
f) Isopropyl alcohol (IPA) 99.5%
5.3 Maintenance and inspection
When the table pad is broken, clearly place an "Out of Order", "Do Not Use", etc. sign on it, and contact your
local distributor or Mizuho.
5.4 Disposal
This device must be disposed of in accordance with local regulations. Please contact your local distributor for
proper disposal.

8
6
Specication
6. Specication
This product’s specications are as per the following.
(9) (10) (11) (12)
190 390
550 665
(13) (14) (15) (16)
550
480 480 675
500
500
235
(17)
500
950
Thickness: 70 mm
Unit (mm)
238
1127 527 107 585
700634 727464240
500
240
500
(6) (7) (8)
(1) (2) (3) (4) (5)

9
6
Specication
Product code Product description No. Weight (kg)
18-042-01 SUSANO Pad for Head Section Type A (1) 0.5
18-042-02 SUSANO Pad for Head Section Type B (9) 0.4
18-042-11 SUSANO Pad for Back Section Type A (2) 1.0
18-042-12 SUSANO Pad for Back Section Type B (10) 0.8
18-042-13 SUSANO Pad for Back Section Type C (13) 1.2
18-042-22 SUSANO Pad for Seat Section Type A (3) 1.4
18-042-23 SUSANO Pad for Seat Section Type B (7) 1.4
18-042-24 SUSANO Pad for Seat Section Type C (11) 1.2
18-042-25 SUSANO Pad for Seat Section Type D (14) 1.0
18-042-26 SUSANO Pad for Seat Section Type E (15) 0.5
(Note 1)
18-042-42 SUSANO Pad for Back and Seat Section Type A (6) 2.2
18-042-44 SUSANO Pad for Back and Seat Section Type C (17) 1.9
18-042-52 SUSANO Pad for Double Leg Section Type A (4) 0.8
(Note 1)
18-042-53 SUSANO Pad for Double Leg Section Type B (5) 0.7
(Note 1)
18-042-54 SUSANO Pad for Double Leg Section Type C (16) 0.7
(Note 1)
18-042-61 SUSANO Pad for Single Leg Section Type A (8) 1.2
18-042-62 SUSANO Pad for Single Leg Section Type B (12) 1.4
The No. corresponds to the number on the dimensional drawing.
Note 1: The weights for each one are on the right and left.
Table pad
Anti-debrillation device
Flame resistance: BS 7177 Fire Test on Mattresses, Sofas and Bases
Classication: Conforms to BS 7177:2008 for medium hazard
(Medium Hazard [5])
Manufacturing method via waterproong:
Welder processing: Note 2
Waterproof fasteners: Note 3
Operating
environment
Temperature 10 to 40°C (50 to 104˚F)
Humidity 30 to 75%
Atmospheric pressure 700 to 1060 hPa
Transportation
and storage
Temperature -10 to 50°C (14 to 122˚F)
Humidity 10 to 85% (without moisture condensation)
Atmospheric pressure 700 to 1060 hPa
Service life Under the proper maintenance, 7 years
Note 2: Process that seamlessly welds via heat.
Note 3: Fastener with high waterproofness.

Revision Record
2023-05-24 Version 1 New release

https://www.mizuho.co.jp
Tokyo 113-00 33, Japan
3-30-13 Hongo, Bunkyo-ku
MIZUHO Corporation
Sales Agent