MK Diamond Products MK-370EXP TILE SAW System manual

04.2009
MK-370EXP TILE SAW
OWNERS MANUAL &
OPERATING INSTRUCTIONS
www.mkdiamond.com
MK Diamond Products, Inc.
Caution: Read all safety and operating instructions before
using this equipment.This owners manual MUST accompany
the equipment at all times.
Revision 301
Manual Part No. 160084

42
MK-370EXP PARTS LIST

43
MK-370EXP PARTS LIST
ITEM
NO. DESCRIPTION
PART OR
IDENTIFYING
NO.
QTY.
REQ.
1WASHER, FLAT CUT 3/8 101360 1
2RIP GUIDE (COMP) 134551 1
3WRENCH 134684 1
4FLANGE, OUTER 135830 2
5NUT, HEX, 5/8 - 18 135848 1
6KNOB, 5/16 - 18 X 1 151681 2
7SCREWS, 5/15 - 18 X 1 HEX HEAD MACHINE 151743 2
8WINGNUT, NYLK, 5/16-18 151746 1
9WASHER, LOCK, SPLIT, 5/16 151747 3
10 BOLT, HEX HD TAP, 5/16 - 18 X 2-1/2 151748 1
11 NUT, 10-24 HEX 151749 2
12 SCREW, PHIL HD 10 - 24 X 3/4 151750 1
13 SCREW, PHIL HD 10 - 24 X 1" 151751 1
14 BOLT, SHOULDER 1/2 X 1/2 151753 2
15 WASHER, 5/16 SAE FLAT 151754 5
16 SCREW,WING, 1/4-20 X 1/2 151888 1
17 NUT, 1/4-20 HEX 151893 1
18 WASHER, 1/4 SAE FLAT 151915 1
19 SCREW, SHOULDER 5/16 - 18 X 5/8 152137 1
20 SCREW, 1/4 - 20 X 3/4 HEX HEAD MACHINE 152370 1
21 BLADE, 7" 153441 1
22 WRENCH, 11/16 OPEN END 153450 1
23 ELBOW, 1/8 MNPT X 1/4 BARB, BRASS 154652 1
24 GUARD, 7 INCH BLADE (COMP) 154811 1
25 PUMP, WATER 155987-MK 1
26 MOTOR, 120V 7.4A 156428-R 1
27 ASSEMBLY, ROLLER WHEEL 156586 1
28 KNOB,TRI 156770-01 1
29 SCREW, FLAT HD 10-32 X 5/8" 157554 4
30 KNOB, 1/4-20 X 3/4" 159428-1 1
31 CASTING, CUTTING HEAD (COMP) 159937 1
32 CASTING,TABLE, 370/770EXP (COMP) 159939 1
33 MOTOR MOUNT (COMP) 159941 1
34 BAR, GUIDE 159942 1
35 PAN,WATER 160041 1
36 GUARD, SPLASH 160310 1
37 ASSEMBLY, FRAME 167450 1

44
MK-370EXP PARTS LIST
CHART 2
CHART 1

45
MK-370EXP PARTS LIST
ITEM
NO. DESCRIPTION
PART OR
IDENTIFYING
NO.
QTY.
REQ.
1 SCREW, 5/16 - 18 X 1 HEX HEAD MACHINE 151743 2
2WASHER, LOCK, SPLIT, 5/16 151747 2
3WASHER, 5/16 SAE FLAT 151754 2
4WHEEL, ROLLER 151799 2
5NUT, 1/4 - 20 HEX 151893 2
6SCREW, HEX HEAD 1/4-20 X 1-1/2" 151914 2
7WASHER, 1/4 SAE FLAT 151915 2
8BRACKET, ROLLER WHEEL 156522 1
CHART 1
ITEM
NO. DESCRIPTION
PART OR
IDENTIFYING
NO.
QTY.
REQ.
1 TABLE (COMP) 159939 1
2BEARING, MULTI LUBE 159948 2
CHART 2

MK Diamond Products, Inc.
1315 Storm Parkway
Torrance, CA 90501
Toll-Free: [phone]
Phone: [phone]
Fax: [phone]
www.mkdiamond.com
MK-370EXP TILE SAW
OWNERS MANUAL & OPERATING INSTRUCTIONS
DOCUMENT NO.160084
REVISION 301
04/09