MobileHelp Complete User Guide 9
MHP8003-359B
Testing your Classic LT System
Please test your system on a weekly basis using the TEST icon.
In order to test your system on battery backup, please unplug the power from the AC outlet.
You can use the TEST icon on your Cellular Base Station to conduct a test without speaking
to an Emergency Response Operator by following these steps:
- Touch and hold the TEST icon until you hear “user auto test”, this will take approximately
6 seconds.
- You will hear an announcement over the Base Station that will instruct you to press the
Emergency button or Pendant.
- Press the Neck Pendant or Wrist Button.
- The Base Station will announce “test call sent to Emergency Response Center.”
- If your test was successful, you will hear “thank your for testing your device” from the
Base Station speaker.
- If your test was not successful, the Base Station will announce “user auto-test failed,
please contact Technical Support.”
If you unplugged your Base Station for the test, once you have nished testing,
please remember to plug the power back into the AC outlet.
