Mobotix T25 User manual

HD Super Panorama: From wall to wall without blind spots
180°
Part 1: System Overview and Installation
Installation and Cabling
(for the Installer)
Part 2: Start-Up and Configuration
Software and Network
(for the System Administrator)
www.mobotix.com
The HiRes Video Company
EN
T25 System Manual Part 2
HiRes Video Innovations
The German company MOBOTIX AG is known as the leading pioneer in network camera technology and its
decentralized concept has made high-resolution video systems cost-ecient.
MOBOTIX AG • D-67722 Langmeil • Tel: [phone] • Fax: [phone] • [email protected]
60.197_EN_V1_11/2013

2/128
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
T25 System Manual Part 2: Contents
Hemispheric IP Video Door Station with camera, KeypadRFID and Info Module • Made in Germany • www.mobotix.com

3/128
Contents
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
CONTENTS
1 Overview Of Application Scenarios 10
1.1 Standard Scenario 10
1.1.1 Description 10
1.1.2 Example 12
1.2 Advanced Scenario 14
1.2.1 Advanced Access Control 14
1.2.2 Multiple Doorbells And Voice Mailboxes (Addressees) 16
1.2.3 Multiple Door Stations 18
1.3 Expand System With Computer And MxEasy 20
1.3.1 Computer As T25 Remote Station 20
1.3.2 Worldwide Two-Way Communication 21
1.3.3 Network Without DHCP Server (Static IP Addresses) 22
2 System Startup Without A Computer 24
2.1 Step 1: Perform the Auto Configuration 26
2.1.1 Start The Videophone 26
2.1.2 Start The Door Station 27
2.1.3 Start the Auto Configuration 28
2.1.4 Functional Test Part 1 29
2.2 Step 2: Set up the KeypadRFID Access Module 32
2.2.1 Entering The Super PIN 33
2.2.2 Adding Admin Cards 34
2.2.3 Adding User Cards (Fast Setup) 36
2.2.4 Setting the Time Zone, Time And Date 38
2.3 Step2: Set up the BellRFID Access Module 42
2.3.1 Entering the Super PIN 43
2.3.2 Set the Bell Button Set to be Installed 44
2.3.3 Insert the Function/Bell Buttons 46
2.3.4 Train the Admin Card 46
2.3.5 Add User Cards (Any Time Later on) 47
SYSTEM MANUAL PART 2 – START-UP AND CONFIGURATION
This T25 System Manual Part 2, «Start-Up and Configuration» is supplemented by
the
T25 System Manual Part1, «System Overview and Installation» . If you no longer
have a manual at your disposal, you can download a PDF file from the MOBOTIX
website (www.mobotix.com> Support> Manuals).

4/128
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
T25 System Manual Part 2: Contents
2.4 Step 3: Configure The System Via A Videophone 48
2.4.1 Change the Menu And Voice Mailbox Greeting Language 50
2.4.2 Open Admin Setup 51
2.4.3 Change Your Super PIN 52
2.4.4 Set Door Status Display 53
2.4.5 Activate Video Recording 54
2.4.6 Functional Test Part 2 56
2.5 Step 4: Protect Your System Via A Videophone 58
2.5.1 Change Grandstream Web Password 59
2.5.2 Disable Auto Configuration 60
2.5.3 Save Your System Configuration 61
3 KeypadRFID Access Configuration 62
3.1 Quick Start: Access Configuration 62
3.2 Individual Configuration Of Access Media 64
3.2.1 Personal, Transponder And Contact Numbers 64
3.2.2 T25 Product Pass for Recording System Information 65
3.3 Managing Transponders 66
3.3.1 Adding User Cards (Individual Number Assignment) 66
3.3.2 Erasing User Cards 68
3.3.3 Time-Restricted Access (“Tradesman Card“) 70
3.3.4 Adding Admin Cards 72
3.3.5 Erasing Admin Cards 73
3.4 Managing Access PINs 75
3.4.1 Adding PINs 75
3.4.2 Deleting PINs 77
3.4.3 Changing PINs 78
3.5 Erasing All Access Privileges Of A User (Cards/PINs) 80
3.6 Erasing Contacts (Doorbell/Voice Mailbox) 82
3.7 Changing the Super PIN at the KeypadRFID 84
4 BellRFID Access Configuration 86
4.1 Managing Transponders 86
4.1.1 Adding User Cards 86
4.1.2 Deleting Individual User Cards 86
4.1.3 Deleting All Cards (Admin and User) 88
4.2 Changing the Super PIN at the BellRFID 88

5/128
Contents
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
5 System Expansion With MxEasy 90
5.1 Setting Up Computers As T25 Remote Stations 92
5.1.1 System Requirements 92
5.1.2 Downloading And Installing MxEasy 93
5.1.3 Connecting a Door Station With The MxEasy Wizard 94
5.1.4 Setting Date And Time 100
5.2 Integrating Door Station Into Network With Static IP Addresses 102
5.3 Setting Up Global Connectivity Between MxEasy And Door Station 108
6 Restoring the System 114
6.1 Error Messages and Rebooting 114
6.2 Backing up and Restoring 115
6.2.1 Exchanging KeypadRFID– With System Restore 116
6.2.2 Exchanging MX-DoorMaster– With System Restore 116
6.2.3 Exchanging an Info Module 117
6.2.4 Exchanging Info Module Mx2wire+ Components 118
6.2.5 Exchanging T25-CamCore Camera Module– With System Restore 119
6.2.6 Exchanging Or Adding Video Phone 119
7 Additional Notes 120
7.1 Weatherproofing And Care 120
7.2 Surge Protection 120
7.3 AVC Video/H.264 121
7.4 Warranty And Repair Service 121
7.5 Other Information 121
7.5.1 Safety Warnings 121
7.5.2 Declaration of Conformity 122
7.5.3 Disposal 122
7.5.4 Disclaimer 123
Manufacturer 127

6/128
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
T25 System Manual Part 2: Contents
Safety Warnings
Risk of overheating when exposed to direct sunlight: When mounting a black,
dark gray or amber-colored T25 IP Video Door Station in locations where the device
is exposed to direct sunlight, the housing temperature can exceed the maximum
allowed temperature limit. This can result in electronic failures and injuries especially
when touching exterior metal parts. If the intended use of the device is at an (unpro-
tected) outdoor location, you should only install white or silver-colored modules and
frames. This product must not be installed within the reach of persons without the
dome.
Electrical installation: Electrical systems and equipment may only be installed,
modified and maintained by a qualified electrician or under the direction and super-
vision of a qualified electrician in accordance with the applicable electrical guidelines.
Make sure to properly set up all electrical connections.
Electrical surges: MOBOTIX cameras are protected against the eects of small elec-
trical surges by numerous measures. These measures, however, cannot prevent
the camera from being damaged when stronger electrical surges occur. Special
care should be taken when installing the camera outside of buildings to ensure
proper protection against lightning, since this also protects the building and the
whole network infrastructure.
Max. power consumption of attached extension modules: The power consump-
tion of all attached MxBus modules must not exceed 2.5W . When attaching mod-
ules to the MxBus connector and the USB connector, the power consumption of all
attached modules must not exceed 3W
, if the camera is powered by PoE class3.
If PoE class2 is used, the power consumption of all attached modules must not
exceed 1W!
Legal aspects of video and sound recording: You must comply with all data protec-
tion regulations for video and sound monitoring when using MOBOTIX products.
Depending on national laws and the installation location of the T25, the recording
of video and sound data may be subject to special documentation or it may be
prohibited. All users of MOBOTIX products are therefore required to familiarize them-
selves with all valid regulations and comply with these laws. MOBOTIX AG is not
liable for any illegal use of its products.
Network security: MOBOTIX products include all of the necessary configuration
options for operation in Ethernet networks in compliance with data protection laws.
The operator is responsible for the data protection concept across the entire system.
The basic settings required to prevent misuse can be configured in the software and
are password-protected. This prevents unauthorized parties from accessing these
settings.
Additional instructions:
•
This product must not be used in locations exposed to the dangers of explosion.
• Make sure that you are installing this product on a solid surface.
§

7/128
Contents
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
MOBOTIX Seminars
MOBOTIX oers inexpensive seminars that include workshops and practical exer-
cises.
For more information, visit www.mobotix.com > Seminars.
Copyright Information
All rights reserved. MOBOTIX , the MX logo, MxControlCenter , MxEasy and MxPEG
are trademarks of MOBOTIX AG registered in the European Union, the U.S.A., and
other countries.
Microsoft , Windows and Windows Server are registered trademarks
of Microsoft Corporation.
Apple , the Apple logo, Macintosh , OSX , iOS , Bonjour , the
Bonjour logo, the Bonjour icon, iPod and iTunes are trademarks of Apple Inc. registered
in the U.S.A. and other countries. iPhone , iPad , iPad mini and iPod touch are Apple
Inc. trademarks.
Linux is a trademark of Linus Torvalds. All other marks and names
mentioned herein are trademarks or registered trademarks of the respective owners.
Copyright © 1999-2013 MOBOTIX AG, Langmeil, Germany. Information subject to
change without notice!
Download the latest version of this and other manuals as PDF files from
www.mobotix.com> Support > Manuals.

8/128 T25 System Manual Part 2
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
FOREWORD
Dear MOBOTIX customer,
The T25 IP Video Door Station is a complete outdoor system that includes a hemispheric
door camera with built-in microphone, speakers, a voice mailbox function (T25-CamCore)
and an access module with integrated RFID card reader for keyless access (KeypadRFID/BellRFID).
The tamper-proof MX-DoorMaster with backup power supply, which also serves as a
doorbell, is installed indoors. The Grandstream GXV3140, a sleek, high-quality VoIP video
phone, makes the perfect remote video station.
The entire MOBOTIX system was designed to allow it to be started up and configured quickly
and easily by a single user. In the first section of the manual, “Overview Of Application
Scenarios,” we will familiarize you with the many ways in which you can use this flexible
system. You can then decide for yourself which system functions you would like to use
and configure.
The dierent operation steps correspond to the order of the chapters of this manual and
you can simply skip the sections pertaining to functions that you do not need. The IP-based
system is extremely flexible, meaning that you can easily change the configuration – and
the range of available functions – at any time.
You can operate and configure the entire system without the need for a computer or any
other special devices. Only the optional extensions listed in Section 4 require you to connect
the T25 to a computer running MxEasy. The MxEasy video software is free of charge and
can be downloaded directly from the MOBOTIX website (www.mobotix.com> Support>
Software Downloads).
Our support and international sales sta are available at [email protected]
from Monday to Friday, 8 a.m. to 6 p.m. (CET). We hope that you enjoy your new powerful
MOBOTIX IP Video Door Station.
Grandstream GXV3140MX-DoorMasterT25 IP Video Door Station

9/128
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]

10/128 T25 System Manual Part 2: Overview Of Application Scenarios
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
1 OVERVIEW OF APPLICATION SCENARIOS
1.1 Standard Scenario
1.1.1 Description
The standard application scenario for the MOBOTIX IP Video Door Station is the simple
one-party scenario (for example, a single-family home or doctor’s oce). This scenario
involves one building or apartment with a door that is secured using the T25 system.
At the door, visitors can ring the doorbell for one party (meaning one or more occupants).
Hardware And Functions In The Standard Scenario:
•
Outdoor station: One T25 Video Door Station with KeypadRFID and multiple transponder
cards (blue user cards for day-to-day use, red admin card for system administration)
• Remote station in the house: Grandstream video phone &/or computer with MX Easy.
• Additional doorbell in the house: MX-DoorMaster (with connected door switch and
door lock switch)
Visitors can press the bell button on either the camera or the KeypadRFID to ring the doorbell
of the building or apartment. The video phone and the MX-DoorMaster then call the house
phone or MX Easy.
The homeowner picks up the receiver in order to speak to the visitor. The live image of
the door camera is displayed in the color display on the video phone. The homeowner
can then press a button on the video phone to activate the electric door opener and, for
example, switch on the light in the stairwell.
If the homeowner does not respond to the doorbell, and the voice mailbox function is
activated, visitors can leave a message at the door – just as they would on a telephone
answering machine. The homeowner can listen to these messages at the door station or
at a video phone in the house.
Admin card
Welcome Message:
Please leave a message.
To leave a message, press and hold
the blue letter button.
Message:
Please call me
back. John!