Mocka Aspiring Change Table User manual

D E
ABC
Phillips screwdriver required
Hardware Supplied
Wall Strap
16x
wood dowel
1x
allen key
16x
bolt
1x
screw
1x
wall screw
F
2x
washer
G
1x
wall anchor
H
1x
wall strap
WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Aspiring Change Table
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Insert 8x dowel (B) into panels [6] and [7].
Attach panel [3], [4] and [7] to panel [6].
Slide panel [8] into the grooves between panels [3] and [4].
Attach panel [1] to panels [3] and [4] with 4x bolts (A).
Insert 4x dowel (B) into 4x panels [5] and attach to panel [1] with
4x botls (A). Tighten all bolts with allen key (C).
7
6
4
3
4
3
8
5
5
5
5
1
B
B
B
B
B
B
B
B
A
A
A
A
A
A
A
B
B
B
CA
A
Aspiring Change Table
2
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Assembly Instructions

12
Insert 8x dowel (B) into panels [6] and [7].
Attach panel [3], [4] and [7] to panel [6].
Slide panel [8] into the grooves between panels [3] and [4].
Attach panel [1] to panels [3] and [4] with 4x bolts (A).
Insert 4x dowel (B) into 4x panels [5] and attach to panel [1] with
4x botls (A). Tighten all bolts with allen key (C).
7
6
4
3
4
3
8
5
5
5
5
1
B
B
B
B
B
B
B
B
A
A
A
A
A
A
A
B
B
B
CA
A
34
Slide panels [9] and [10] into the grooves between panels [3], [4]
and [7].
Slide 2x panels [11] into the grooves between the 4x panels [5]
Insert 4x dowel (B) into panels [5].
Attach panel [2] to panels [3], [4], [5] and [7] with 8x bolts (A).
Tighten all bolts with allen key (C).
10
9
11
11
7
4
3
2
5
5
A
A
BA
A
A
A
A
A
7
4
3
5
5
5
5
C
A
A
Aspiring Change Table
3
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Assembly Instructions

5
Once assembled lift furniture into place, do not drag.
Attach wall strap (H) to panel [3] with 1x washer (F) and 1x screw (D).
Use a drill to create a small hole lining up with the safety strap (H).
Fasten to wall using 1x wall anchor (G), 1x washer (F) and 1x wall screw (E).
Ensure unit is balanced and steady before use. You’re done, enjoy!
3
D
E
F
G
H
F
Aspiring Change Table
4
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
Assembly Instructions