Mocka Aspen User manual

mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Aspen
Change Table with Drawers
Thank you for your purchase.
Please follow the instructions below for correct assembly
WARNING: Any furniture that is not anchored to a wall has
the potential to tip over in certain circumstances, i.e. if a
child attempts to climb up on the furniture or in the event
of an earthquake. Accordingly, we recommend that all
furniture is anchored to a wall. We supply a free safety
wall anchor with all furniture sold and we recommend
these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please
note that dierent wall materials may require dierent
fixing devices from those supplied.
A
Hardware Supplied
Bolt M6*30
x20
F
Knob
x2
L
Right Slide
x3
M
Wall Strap
Wood Screw
x24
G
Bolt M4*25mm
x2
L
Right Slide
x3
H
Allen Key
J
Left Slide
x2
K
Left Slide
B
x3
C
Wood Dowel
x12
Bolt M6*40
x8
D
Bolt M6*50
x16
E
Barrel Nut
x16
N O
1x 1x
screw
F
2x
wall screw
G
1x
washer
H
1x
wall anchor wall strap
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.

Aspen
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
2
1
Change Table with Drawers
2
Attach 2 x left slides (J) to panel [1] and 2 x right slides (L) to panel [2]
as shown and secure with 12 x screws (M). Tighten with a screwdriver.
Attach 4 x panels [4] to panel [3] and secure with 8 x bolts (C).
Tighten with an Allen Key (H).
12
M x6
M x6
J x2
L x2
3
4
4
4
4
C x8
H
C
C

Aspen
Change Table with Drawers
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Attach panels [5] and [6] to assembled frame as shown and
secure with 6 x bolts (A). Tighten with an Allen Key (H).
Insert 6 x dowels (B) into panels [8], [9] and [10] as shown. Attach
panel [7] to panels [8], [9] and [10] and secure with 7 x bolts (A).
Tighten with an Allen Key (H).
3 4
A
A
B
H
H
5
6
A x6
7
8
9
10
A
A
A
A
B
B
A
A
A
B
B
B
B

mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Aspen
Change Table with Drawers
5 6
Slide panels [11], [12] and [13] into position as shown. Insert 6 x dowels (B) into assembled frame as shown. Attach panel [2]
to assembled frame and secure with 7 x bolts (A). Tighten with an Allen Key (H).
A x7
11
12
13
A x7
x6B
2
H

Aspen
Change Table with Drawers
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Attach left rail (K) to panel [14] and right rail (L) to panel [15]
and secure with 6 x screws (M). Tighten with a screwdriver.
Attach panels [14] and [15] to panel [16] and secure with 4 x bolts (D)
and 4 x barrel nuts (E). Tighten with an Allen Key (H).
7
Ex2
Ex2
Dx2
D
14
16
15
x2
M
M
M
M
M
M
14
15
K L
D
14
H
8
x2

Aspen
Change Table with Drawers
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Slide panel [17] into position as shown. Attach 1 x knob (F) to panel [18] and secure with 1 x screw (G). Attach
panel [18] to assembled frame and secure with 4 x bolts (D) and 4 x
barrel nuts (E). Tighten with an Allen Key (H) and a screwdriver.
x2 x2
10 D
E
17
18
Dx2
Dx2
Ex2
Ex2
G
F
H
9

11
Aspen
Change Table with Drawers
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
ASSEMBLY I N S TRUCTION S
Slide assembled drawers into position as shown.
Once assembled lift furniture into place, do not drag.
Attach wall strap (H) to unit with 2 x washers (F) and 1x screw (N).
Use a drill to create a small hole lining up with the safety strap (H).
Fasten to wall using 1 x wall anchor (H), 2 x washers (F), 1 x wall
screw (O) and 1 x screw (N).
Ensure unit is balanced and steady before use. You’re done, enjoy!
12
NO
FG
H
F