Mocka Llama User manual

Kids Rocking Llama
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
Hardware Supplied
screws
x8
E
rockers
x2
F
body
x1
B
nuts
x4
C
handles
x2
Phillips screwdriver required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
D
cross bars
x2
WARNING: Due to the small size of the hardware
and the sharp points of the screws, they are
potentially hazardous.
Keep all assembly parts and packaging materials
out of reach of children
Retain packaging information for future reference
Adult assembly required
Recommended age 18 months +

12
Kids Rocking Llama
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Insert the ends of the legs into the 2 x cross bars (D) holes as shown.
If the holes on the cross bar (D) are not lining up, place one leg in the
hole on the cross bar (D) and then apply pressure to get the other leg
to match up with the second hole on the cross bar (D).
Attach 2 x cross bars (D) to 2 x rockers (E) and secure with 8 x screws
(A). Tighten with a screwdriver.
D
D
E
E
AA
D
A A
A A
A A

3
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach 1 x body (F) to the assembled rocker and secure with 4 x nuts
(B) and tighten. Attach 2 x handles (C) onto the body (F) as shown and
rotate to tighten.
Kids Rocking Llama
B
B
B
B
F
C
C