Mocka Brixton User manual

mocka.co a.com.au .nz I mock
Brixton
Desk
Thank you for chasing a ocka follow the pur M . Please Brixton Desk
manufacturer s assembly tail to ensure the safety' instructions in de
features of the omised. nodesk ist compr
A B C D E
Hardware Supplied
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an
earthquake. Accordingly e supply a , we recommend that all furniture is anchored to a wall. W
free safety wall anchor with all furniture sold and we recommend these are used to prevent
your product tipping. The fixing device provided should fit most wall types, but please note
that different wall materials may require different fixing devices from those supplied.
Phillips & Flathead screwdrivers required
F G
HI K L M
bolt & nut
set x24 PVC sticker x24 40mm bolt x6 30mm bolt x10 20mm bolt x1 15mm bolt x2 nut
x3
organisertop
x1 foot x4 wall plug x2 safety strap x2
25mm
screw x2
J
14mm
screw x2
N
12mm
bolt x16

mocka.co a.com.au .nz I mock
1 2
Attach 4 x feet (I) to 2 x frame [7]. Attach frame [8], frame [9] and frame [10] to 2 x frame [7] with 6 x bolt (C).
Tighten with a screwdriver.
Brixton
Desk
I
I
I
I
7
7
C
C
C
C
C
C
7
7
10
9
8

mocka.co a.com.au .nz I mock
3 4
Attach the triangle frame [12] to metal frame [7], [8] and [9] with 4 x bolt (N) . Insert 24 x nut (A) into panel [3], [4], [6] and 2x panel [5].
Brixton
Desk
5
4
3
6
A
A
A
x2
7
8
9
7
N
N
N
N
12

mocka.co a.com.au .nz I mock
5
Attach frame [11] to frame [9] and [10] with 2 x bolt (F), bolt (E) and 3x nut (G).
Tighten with a screwdriver.
6
Attach panel [3] and [4] to panel [6] with 4 x bolt (A). Tighten with a screwdriver.
Brixton
Desk
A
A
A
A
3
4
6
G
E
F
F
G
G
9
10
11

mocka.co a.com.au .nz I mock
7
Attach panel [1] to metal frame with 10 x bolt (D). Tighten with a screwdriver.
8
Brixton
Desk
Attach panel [3], [6] and [4] to panel [1] with 6 x bolt (A). Tighten with a
screwdriver.
1
6
A
A
A
A
A
A
3
4
7
D
1
7
8
9

mocka.co a.com.au .nz I mock
9
Attach 2 x panel [5] to panel [1] with 4 x bolt (A), and tighten with a screwdriver.
Then insert organiser top (H) into panel [6].
Brixton
Desk
Attach panel [2] to panel [3], [4] and 2 x panel [5] with 10 x bolt (A). Tighten with
a screwdriver.
10
A
2
4
3
5
5
6
A
A
A
A
1
H
6
5
5

M
J
mocka.co a.com.au .nz I mock
11
Attach safety strap (M) to panel [2] with 2 x screw(J). Then you can stick the
PVC sticker on visible nut (A) to make the desk pretty.
Brixton
Desk
Move the unit to the desired location against a wall. Attach the other end of the
2 x safety straps (M) to the wall using 2 x wall plugs (L) and 2 x screws (K).
Tighten with a screwdriver.
12
M
L
K
M
J
B
2

mocka.co a.com.au .nz I mock
13
Brixton
Desk
You're done, enjoy!