Mocka Alps Bedside Table User manual

Alps Bedside Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
bolt
x14
x4
A B C D EFGH
JKLMN
I
O P Q
Hardware Supplied
dowel
x10
screw
x26
slide
rail x2
slide
rail x2
slide
rail x2
slide
rail x2
locking
nut x14
screw
x4
x4
wedge screw bolt
x16
x2
bracket
x4
bracket
x1
Allen
key
cover
x2
seal
x2
Phillips & Flathead screwdrivers
felt
pad
x4
R S
screw
x16

Alps Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
Insert 4x bolts (C) into panel [1] and tighten with a screwdriver. Attach 1x slide rail (F) and 1x slide rail (G) to panels [3] and
[4] as shown and secure with 12x screws (E). Tighten with
a screwdriver. Insert 2x bolts (C) into panels [3] and [4].
Tighten with a screwdriver.
.
G
CR
E
F
CL
E
C
1
3
4
E
E
E
F
C
C
CE
E
EG
E
E
EG
C
C
E
E
E
F

Alps Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
3 4
Attach 1x bracket (M) to panel [5] and secure with 2x screws (E).
Tighten with a screwdriver. Place 1x cover (N) over the bracket (M)
as shown.
Attach panel [4] and panel [3] to panel [5] with 2x dowels (A) and
secure with 2x locking nuts (D). Tighten with a screwdriver.
5
A
A
D
D
4
3
D
EE
5
EE
N
MM
The round head
is aligned with the
direction of the arrow.
M

Alps Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
65
Attach panel [4] and panel [3] to panel [1] with 4x dowels (A) and
secure with 4x locking nuts (D). Tighten with a screwdriver.
Slide panel [6] down along the grooves between the panels [4]
and [3] to form the back of the unit as shown.
A
D
D
3
4
1
3
4
6
A
A
A

Alps Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
7 8
Attach 1x bracket (M) to panel [2] and secure with 2x screws (E).
Tighten with a screwdriver. Place 1x cover (N) over the bracket (M)
as shown.
Attach panel [2] to the unit with 4x dowels (A) and secure with 4x
screws (B). Tighten with a screwdriver.
2
A
B
B
A
B
A
B
3
4
EE
EE
N
MM
The round head
is aligned with the
direction of the arrow.
M
2

Alps Bedside Table
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
910 Drawers x2
Assembly Instructions
Attach 4x leg brackets (P) to legs [7] using 8x screws (R).
Tighten with a screwdriver. Attach legs [7] to panel [2] using
16x bolt (Q) as shown. Tighten with an Allen key (S). Attach
4x felt pads (L) to the ends of the legs.
Insert 4x bolts (C) into panel [8]. Attach 1x seal (O) to panel [8]
and secure with 1x screw (E). Tighten with a screwdriver.
R
Q
Q
Q
Q
Q
C
C
C
C
E
O
P
2
7
7
7
7
7
7
8
L
L
L
L
L
S

Alps Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
12 Drawers x211 Drawers x2
Attach panel [9] and panel [10] to panel [8] secure with
4x locking nuts (D). Tighten with a screwdriver.
Slide panel [11] along the grooves between the side panels [9] and [10].
88
D
D
D
D
9
9
10
10
11

Alps Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
14 Drawers x213 Drawers x2
Attach panels [12] to panel [9] and [10] as shown using 4x screws (R).
Tighten with a screwdriver.
Attach slide rail (I) and slide rail (H) to the underside of the side panels
as shown. Secure with 4x screws (E) and tighten with a screwdriver.
9
12
10
R
R
R
RH
E
E
E
E
I
11
10
8
8

Alps Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
1615
Insert the assembled drawers into the corresponding compartments
as shown. Ensure the drawers slide easily along the rails. If the door
is not catching or sitting flush, twist the end of the cover (N) until it
catches on the seal (O).
.
Attach 4x wedges (J) into the corners of the back of the
unit and secure with 4x screws (K). Tighten with a screwdriver.
Attach 1x safety straps (V) to the top of the back side of the unit as
shown using 1x washers (Z) and 1x screws (W). Tighten with a
screwdriver.
8
8
V
Z
W
V
Z
W
K
J
K
J
N

Alps Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
1817
You’re done, enjoy!
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the safety strap (V).
Fasten to the wall using 1x washers (Z), 1x wall anchor (X) and
1x screws (Y). Ensure unit is balanced and steady before use.
X
Y
Z
wall
anchor
screw
strap
washer