Mocka Genevieve Change Table User manual

mocka.co.nz I mocka.com.au
ASSEMBLY INSTRUCTION S
Genevieve Change Table
• READ all instructions before use of the change
table.
• FALL HAZARD: children have suered serious
injuries after falling from changing tables. Falls can
happen quickly.
• STAY in arm’s reach of your child and NEVER
leave a baby unattended on any change surface.
• ALWAYS keep one hand on the baby when using
the change table to prevent the baby from falling.
• DO NOT use if the product is damaged or broken.
• NEVER allow baby to sleep on the change table.
This item is NOT a safe sleeping surface.
• REMOVE all hazards from the change table area
out of reach of your baby (E.G pins, lotions, toys).
• SUITABLE FOR: newborn to 12 months. Maximum
to 11 kgs.
• READ and follow the manufacturer’s instructions
and KEEP for future use.
• USE a changing pad that is 78cm x 46cm x 10cm.
• WARNING this product is not intended to be used
without a changing pad. use of this product without a
changing pad may result in death or serious injury to
your child from falling.
• WARNING to help avoid any serious or fatal injury,
this product comes included with a wall strap to pre-
vent topping. we strongly recommend that this prod-
uct be permanently fixed to a wall or other suitable
surface by a qualified tradesperson.
• CLEANING & CARE
DO NOT use the product unless all components are
correctly fitted and adjusted. regularly inspect the
change table for maintenance of loose screws etc.
DO NOT use the change table if any part is broken,
torn or missing. contact the manufacturer for further
advice.
WIPE the change table clean using a clean damp cloth
and suitable commercial cleaner.
• ENSURE the changing table is level, stable and struc-
turally sound.
manufactured by: mocka products pty ltd. po box 18,
pinkenba, qld 4008. mocka limited, po box 29335, ric-
carton, christchurch 8440, nz
!! WARNING

mocka.co.nz I mocka.com.au
ASSEMBLY INSTRUCTION S
Genevieve Change Table
HARDWARE SUPPLIED
WALL STRAP
16x
bolt
B
2x
bolt
J L
allen key
1x24x
screw
4x
hinge
CI
24x
bolt
A
2x
handle
K
1x
screw
1x
wall screw
2x
washer
1x
wall anchor
1x
wall strap
FGH
D E
Phillips screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.

mocka.co.nz I mocka.com.au
ASSEMBLY INSTRUCTION S
Genevieve Change Table
Attach 4x hinges (I) to panel [1] and panel [2] with 16x screws (C) as shown.
Tighten screws with Pillips screwdiver.
Attach 2x handles (K) to panel [3] and panel [4] with 2x bolts (J).
Tighten screws with Pillips screwdiver.
1 2
C
C
C
I
I
I
I
J
J
J
K
Pillips screwdiver
Pillips screwdiver
C
C
2
1
4
3
C
C
C
I
K
K

mocka.co.nz I mocka.com.au
ASSEMBLY INSTRUCTION S
Genevieve Change Table
Attach 4x panels [5] to panel [6] with 8x bolts (B).
Tighten bolts with allen key (L).
Attach panel [6] to panel [7] with 3x bolts (A).
Tighten bolts with allen key (L).
3 4
L
L
B
B
B
B
B
B
B
BB
B
6
5
5
A
A
A
A
6
7

mocka.co.nz I mocka.com.au
ASSEMBLY INSTRUCTION S
Genevieve Change Table
Attach panel [2] to panel [6] and panel [7] with 5 bolts (A).
Tighten bolts with allen key (L).
Slide 2x panels [8] into the grooves on panel [2] and panel [7].
5 6
A
A
A
A
A
A
L
7
7
8
8
2
2
6

mocka.co.nz I mocka.com.au
ASSEMBLY INSTRUCTION S
Genevieve Change Table
Attach panel [1] to panel [6] and panel [7] with 5x bolts (A).
The 2x panels [8] needs to fit into the groove of the panel [1].
Tighten bolts with allen key (L).
Attach 2x panels [9] to panel [1] and panel [2] with 8x bolts (B).
Tighten bolts with allen key (L).
7 8
A
A
A
A
A
L
L
1
1
8
8
9
9
A
B
B
B
B
B
B
B
B
B
7
6
2

mocka.co.nz I mocka.com.au
ASSEMBLY INSTRUCTION S
Genevieve Change Table
Attach panel [10] to panel [1] and panel [2] with 4x bolts (A).
Attach panel [11] to panel [1] and panel [2] and panel [6] with 7x bolts (A).
Tighten bolts with allen key (L).
Align 2x hinges (I) with the grooves on the panel [4].
Attach 2x hinges (I) to panel [4] with 4x screws (C) as shown.
Tighten screws with Pillips screwdiver. vv
9 10
A
A
A
A
A
A
A
A
A
A
A
1
4
Pillips screwdiver
10
2
11
A
L
A
C
C
I
I
C
C
I
6

mocka.co.nz I mocka.com.au
ASSEMBLY INSTRUCTION S
Genevieve Change Table
Align 2x hinges (I) with the grooves on the panel [3].
Attach 2x hinges (I) to panel [3] with 4x screws (C) as shown.
Tighten screws with Pillips screwdiver.
Once assembled lift furniture into place, do not drag.
Attach wall strap (H) to panel [7] with 1x washer (F) and 1x screw (E).
Use a drill to create a small hole lining up with the safety strap (H).
Fasten to wall using 1x wall anchor (G), 1x washer (F) and 1x wall screw (D).
Ensure unit is balanced and steady before use. You're done, enjoy!
11 12
3
DE
F
F
G
H
Pillips screwdiver
C
C
I
I
C
C
I
7