Mocka Bronte User manual

Bronte Six Drawer
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Thank you for your purchase.
Please follow the instructions below for correct assembly.
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
WARNING: Any furniture that is not anchored to a wall
has the potential to tip over in certain circumstances, ie. if a
child attempts to climb on the furniture or in the event
of an earthquake. Accordingly, we recommend that all
furniture is anchored to a wall. We supply a free safety wall
anchor with all furniture sold and we recommend these are
used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that
different wall materials may require different fixing devices
from those supplied.
Wall
attachment
S
Hardware Supplied
screw
x2
A
screw
x24
F
rail
x6
K
dowel
x20
L
screw
x4
M
allen key
x1
N
brace
x16
O
screw
x16
T
screw
x12
U
screw
x12
V
foot
x1
G
guide
x6
H
screw
x6
I
left rail
x6
J
right rail
x6
B
locking nut
x46
C
bolt
x46
D
screw
x48
E
handle
x6
P
wall plug
x2
R
screw
x2
Q
wall strap
x2

1x6 2x6
Bronte Six Drawer
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach panels [1], [2] and [3] together as shown and secure with
4 x screws (A). Tighten with a screwdriver.
Slide panel [4] into position as shown.
A
A
A
A

3x6
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach panel [5] to assembled frame and secure with 4 x bolts (C) and
4 x locking nuts (B). Tighten with a screwdriver.
Attach 1 x handle (E) to assembled frame and secure with 2 x screws
(T). Tighten with a screwdriver.
Bronte Six Drawer
4x6
B
C
TE

5x6
4
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach 1 x left rail (F) and 1 x right rail (G) to panels [1] and [3] and
secure with 4 x screws (D). Tighten with a screwdriver.
Attach 6 x left rails (I) and 6 x right rails (J) to panels [6], [7] and [8]
as shown and secure with 24 x screws (D). Tighten with a screwdriver.
Bronte Six Drawer
6
D
D
F
G
DD
I J
DD
I J
D
D6
7
8
7

7
5
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach panels [9] and [10] to panel [7] and secure with 6 x bolts (C),
2 x dowels (K) and 4 x locking nuts (B). Tighten with a screwdriver.
Attach panels [9] and [10] to panels [7] and [8] and secure with
6 x bolts (C), 2 x dowels (K) and 4 x locking nuts (B). Tighten with a
screwdriver.
Bronte Six Drawer
8
B
C
K
B
C
K
BC
C
B
7
6
10
10
9
8
10
10
9
6

9
6
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach panel [11] to panel [16] and secure with 6 x bolts (C), 6 x dowels
(K) and 6 x locking nuts (B). Tighten with a screwdriver.
Attach panel [12] to panel [16] and secure with 6 x bolts (H) and
6 x dowels (K). Tighten with a screwdriver.
Bronte Six Drawer
10
B
CK
H
K
16 16
12
11

11
7
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach panels [13], [14] and [15] , [17] to assembled frame as shown and
secure with 4 x bolts (L) and 12 x screws (U).Add foot (V) to panel [17]
Tighten bolts with an Allen Key (M) and screws with screwdriver.
Attach 16 x braces (N) to assembled frame and secure with 16 x
screws (O). Tighten with a screwdriver.
Bronte Six Drawer
12
U
M
L
N
O
13
15
15
13
14
M
L
L
V
14
17

13
8
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the 2 x safety straps (Q).
Fasten to the wall using 2 x wall anchors (P), 2 x screws (R) and 2 x
screws (S). Ensure unit is balanced and steady before use. You’re
done, enjoy!
Bronte Six Drawer
R
P
Q
S