Mocka Edmond Entertainment Unit User manual

Edmond Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x4
washer
Z
Y
wall
anchor
x2
X
safety
strap x2
WV
screw
x2
wall
screw
x2
hinge
x4
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
and hammer required
Thank you for your purchase. Please follow the instructions for correct assembly.
While we took great effort to ensure these assembly instructions were correct at
the time of printing, sometimes updates are required post production. For the
most up to date versions please refer to the product page on our website.
mocka.com.au/mocka.co.nz
Hardware Supplied
bolt
x12
x8
A B C D EFGH
KLMN
IPO
dowel
x20
screw
x24
locking
nut x12
screw
x8
J
wedge
screw
bolt
x16
bolt
x2
x2
long
bolt
x8
x8
x4
bracket
x1
Allen
key
plastic
glide
shelf
plug
x4
adjuster
x1

Edmond Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
Panel Layout
Insert 8x bolts (C) into panel [1] and tighten with a screwdriver.
1
1
1
3
4
5
5
6
7
8
9
2
10
11
12
40
x4
41
C
C
C
C
C
C
C
C

Edmond Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
2 3
Insert 4x bolts (C) into panels [4] and [8] and tighten with a screwdriver.
4
8
4
8
9
Attach panels [4] and [8] to panel [9] with 4x dowels (A) and secure with
4x locking nuts (D). Tighten with a screwdriver.
A
A
A
A
D
D
D
D
C
C
C
C
D

Edmond Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
54
3
3
7
7
1
8
8
4
4
5
5
6
Attach panels [3], [4], [7] and panel [8] to panel [1] with 8x dowels (A)
and secure with 8x locking nuts (D). Tighten with a screwdriver.
Slide panels [5] and [6] down along the grooves between the panels [3], [4],
[7] and [8] to form the back of the unit as shown.
A
A
A
A
A
A
A
A
D
D
D
D
D
D

Edmond Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
6 7
Attach panel [2] to the unit with 8x dowels (A) and secure with 8x
screws (B). Tighten with a screwdriver.
3
7
2
2
8
4
Attach 4x brackets (G) to legs [40] using 8x long bolts (J). Tighten with
an Allen key (L). Attach legs [40] and [10] to panel [2] using 16x bolt (F)
and 2x bolt (P) as shown. Tighten with an Allen key (L). Attach 4x plastic
glide (K) to the ends of the legs [40] using a hammer as shown. Attach 1x
support leg [41] to panels [10] and [2] as shown. Attach 1x adjuster (N) to
the ends of the legs [41] as shown.
A
A
A
A
A
B
B
B
B
B
B
B
B
40
front
back
G
G
J
J
G
F
F
F
F
F
F
F
F
G
G
G
G
L
K
L
F
F
B
40
40
40
40
41
P
P
N
K
K
K
K
10