Mocka Jesse User manual

*We recommend using a Flathead screwdriver to
tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut
holes before inserting the nut to ensure it locks 100%.
WARNING: Any furniture that is not anchored to a
wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on
the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is
anchored to a wall. We supply a free safety wall
anchor with all furniture sold and we recommend
these are used to prevent your product tipping. The
fixing device provided should fit most wall types, but
please note that different wall materials may require
different fixing devices from those supplied.
Phillips & Flathead screwdriver required
ABC D E
F G HJI
Hardware Supplied
dowel
x9
screw
x6
bolt
x18
locking
nut x 18
small
screw x 10
slide
rail x 1
plastic
glide x4
slide
rail x 1
slide
rail x 1
slide
rail x 1
Wall Mount
x2
washer
Z
wall
screw
Y
wall
anchor
x1
X
safety
strap x1
W
V
screw
x1
x1
Jesse Console Table
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Insert 7x bolts (A) and 6x dowels (C) into panel [1]. Insert 1x dowel (C) and 3x bolts (A) into panel [3], and secure 1x slide
rail (F) with 3x small screws (D). Insert 1x dowel (C) and 3x bolts (A) into
panel [2], and secure 1x slide rail (H) with 3x small screws (D). Tighten
with a screwdriver.
1
3
2
A
A
A
A
AA
A
A
A
A
A
A
C
CC
C
CC
A
D
D
D
D
D
D
D
H
F
C
C
Jesse Console Table
2
mocka.co.nz | mocka.com.au
Assembly Instructions

12
Insert 7x bolts (A) and 6x dowels (C) into panel [1]. Insert 1x dowel (C) and 3x bolts (A) into panel [3], and secure 1x slide
rail (F) with 2x small screws (D). Insert 1x dowel (C) and 3x bolts (A) into
panel [2], and secure 1x slide rail (H) with 2x small screws (D). Tighten
with a screwdriver.
1
3
2
A
A
A
A
AA
A
A
A
A
A
A
C
CC
C
CC
A
D
D
D
D
D
D
H
F
C
C
34
Attach panel [11] to panels [2] and [3] with 2x locking nuts (B). Attach
panel [4] to panels [2] and [3] with 4x locking nuts (B). Tighten with a
screwdriver.
Attach the main panel to panel [1].
3
2
3
2
1
4
4
B
B
B
11
Jesse Console Table
3
mocka.co.nz | mocka.com.au
Assembly Instructions

56
Secure the bolts to panel [1] using 7x locking nuts (B) and tighten with
a screwdriver. Attach 4x plastic glides (J) to the ends of the legs using
a hammer.
Insert 5x bolts (A) and 1x dowel (C) into panel [5].
Drawer x1
3
2
1
4
B
BB
B5
A C
A
A
AA
B
J
J
J
J
Jesse Console Table
Assembly Instructions
4
mocka.co.nz | mocka.com.au

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
78
Attach panels [6], [7] and [9] by the bolts on panel [5]. Fasten the bolts in panels [6], [7] and [9] with 5x locking nuts (B) and
tighten with a screwdriver. Slide panel [10] along the grooves between
panels [6] and [7] to form the base of the drawer.
7
5
9
6
7
5
96
10
B
BB
B
B
Jesse Console Table
Assembly Instructions
5
mocka.co.nz | mocka.com.au

910
Attach panel [8] to the rest of the drawer and secure with 2x screws (E)
in panel [9] and 4x screws (E) on the sides of the drawer. Tighten with
a screwdriver.
Attach 2x slide rails (I) and (G) to the sides of the drawer and secure with
4x small screws (D). Tighten with a screwdriver.
7
89
10
7
10
8
D
D
D
10
7
D
I
G
D
D
E
EE
E
E
E
Jesse Console Table
Assembly Instructions
6
mocka.co.nz | mocka.com.au

910
Attach panel [8] to the rest of the drawer and secure with 2x screws (E)
in panel [9] and 4x screws (E) on the sides of the drawer. Tighten with
a screwdriver.
Attach 2x slide rails (I) and (G) to the sides of the drawer and secure with
4x small screws (D). Tighten with a screwdriver.
7
89
10
7
10
8
D
D
D
10
7
D
I
G
D
D
E
EE
E
E
E
11
12
Insert the completed drawer into the desk, ensuring the rails are
properly aligned and the drawer slides easily along.
Lift the completed desk into the desired location, do not drag.
3
2
Jesse Console Table
Assembly Instructions
7
mocka.co.nz | mocka.com.au

13 14
Attach 1x safety strap (V) to the top of the back side of the unit using
1x washer (Z) and 1x screw (W). Tighten with a screwdriver.
Lift the unit into the desired location up against a wall. Use a drill to
create a small hole lining up with the top of the safety strap (V). Fasten
to wall using 1x wall plug (X) and 1x wall screw (Y). Ensure unit is
balanced and steady before use. You’re done, enjoy!
Wall Mount
V
ZW
screw
strap
washer
X
Y
Z
wall
plug
screw
strap
washer
Jesse Console Table
Assembly Instructions
8
mocka.co.nz | mocka.com.au