Mocka Watson Coffee Table User manual

Phillips & Flathead screwdrivers and hammer required
Hardware Supplied
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Watson Coffee Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
1
mocka.co.nz | mocka.com.au
washer
x8
A
bolt
x8
B

2
12
Watson Coffee Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
A
1
2
2
1
B
AB
AB
AB
AB
A
B
AB
A
B
A
B
X4
Attach panel (2) to panel (1) with 4 x bolt (A) and secure with 4 x washers (B).
Tighten with a screwdriver.
Attach panel (1) to to panel (2) ,4 x bolt (A) and secure with 4 x washers (B).
Tighten with a screwdriver.