Mocka Addi Six Drawer - Wide User manual

Addi Six Drawer - Wide
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
Hardware Supplied
x4
washer
Z
Y
wall
anchor
x2
X
safety
strap x2
WV
screw
x2
wall
screw
x2
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
and hammer required
bolt
x10
x4
A B C D E F G
H J K L MN
I
OP
dowel
x26
screw
x60
slide
rail x6
slide
rail x6
slide
rail x6
slide
rail x6
locking
nut x10
screw
x6
x4
bolt
x30
locking
nut x30
small small
QR
wedge screw
screw
x38
x4
nut
S
key x1
Allen plastic
glide x4
dowel
x4
big
T
dowel
x4
long
U A1
WARNING: Any furniture that is not anchored to a wall
has the potential to tip over in certain circumstances, i.e.
if a child attempts to climb up on the furniture or in the
event of an earthquake. Accordingly, we recommend
that all furniture is anchored to a wall. We supply a free
safety wall anchor with all furniture sold and we
recommend these are used to prevent your product
tipping. The fixing device provided should fit most wall
types, but please note that different wall materials may
require different fixing devices from those supplied.
height
adjuster
x1
double
ended
screw
x1
long
Allen
bolt x 4

Addi Six Drawer - Wide
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
Attach 3x slide rail (F) and 3x slide rail (G) to panels [3] and [4]
as shown and secure with 18x screws (E). Tighten with a screwdriver.
Insert 4x bolts (C) into panels [3] and [4]. Tighten with a screwdriver.
Attach 3x slide rail (G) to panel [5] as shown and secure with
9x screws (E). Flip the panel [5], attach 3x slide rail (F) to the
other side of panel [5] as shown and secure with 9x screws (E).
Tighten with a screwdriver.
G
CR
E
F
E
F
CL
E
G
CR
E
F
E
F
E
F
E
G
E
G
E
G
E
CC
CC
FLIP
F
E
F
E
F
G
E
E
G
E
G
E
3
4
5
5

Addi Six Drawer - Wide
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
34
Attach panel [5] to panels [6] with 4x Long dowels (T). Attach panels [6] to the other side of panel [5] with 4x Long dowels (T).
T
T
T
T
5
5
6
6
6
6

Addi Six Drawer - Wide
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
65
Attach panel [4] to panels [6] with 4x dowels (A). Attach panel [7] to panel [4] and secure with 2x locking nuts (D).
Tighten with a screwdriver.
AD
A
4
4
6
6
7
D

Addi Six Drawer - Wide
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
7 8
Attach panel [3] to panels [6] and [7] with 4x dowels (A) and secure
with 2x locking nuts (D). Tighten with a screwdriver.
Attach panel [7] to panel [5] and secure with 2x screws (R). Tighten
with a screwdriver.
A
D
A
R
7
7
3
6
6
5
D

Addi Six Drawer - Wide
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
910
Assembly Instructions
Slide panel [8] between the grooves of panels [3] and [4] to form the
back of the unit, as shown.
Attach the legs [9] to panel [2] with 4x big dowels (S) and 4x nuts (L)
as shown. Secure with 4x long Allen bolts (Q). Tighten with an Allen
key (M). Attach support leg [10] to panel [2] and secure with 1x
double ended screw (A1).
×
Q
L
L
A1
S
S
Q
L
Q
L
S
3
2
8
9
9
9
9
10
4
Q
L
S
M

Addi Six Drawer - Wide
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
1211
Attach panel [2] to the panels [3], [4] and [5] with 6x dowels (A) and
secure with 6x screws (B). Tighten with a screwdriver.
Attach 4x plastic glides (N) to the end of legs [9] and insert the
adjuster (U) into the panel [10] as shown.
A
A
B
BA
B
B
A
B
B
N
N
N
N
U
2
3
5
4
9
9
9
9
10
N

Addi Six Drawer - Wide
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
13 14
Slide panel [8] between the grooves of panels [3] and [4]. Insert 6x bolts (C) into panel [1]. Tighten with a screwdriver.
C
C
C
C
C
C
8
3
4
1

Drawers x6
Addi Six Drawer - Wide
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
15 16
Attach panel [1] to the unit with 6x dowels (A) and secure with 6x
locking nuts (D). Tighten with a screwdriver.
O
O
O
O
O
A
P
P
P
15
15
16
16
17
18
11
12
13
14
x2
x2
Insert 30x small bolts (O) into panels [11], [12], [13] and [14]. Secure panels
[15], [16] and [17] to panels [11], [12], [13] and [14] with 6x dowel (A) and
30x small locking nuts (P). Tighten with a screwdriver. Slide panel [18]
down along the grooves between panels [15] and [16] to form the base
of the drawer.
A
A
A
A
D
D
D
D
1
3
4
5
11
12
13
14
x2
x2
11
12
13
14
x2
x2

Drawers x6
Addi Six Drawer - Wide
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
17 18
R
R
R
E
EH
E
I
E
15
15
16
16
19
Attach panel [19] to panels [15], [16] and [17] using 36x screws (R).
Now attach 6x slide rail (I) to panel [16] and 6x slide rail (H) to panel
[15] as shown. Secure with 24x small screws (E) and tighten with a
screwdriver.
11
12
13
14
x2
x2
11
12
13
14
x2
x2
11
13
13
14
14
12
Insert the assembled drawers into the unit ensuring they slide smoothly
along the rails.

Attach 4x wedges (J) into the corners of the back of the unit and secure
with 4x screws (K). Tighten with a screwdriver. Attach 2x safety straps (V)
to the top of the back side of the unit as shown using 2x washers (Z) and
2x screws (W). Tighten with a screwdriver.
Addi Six Drawer - Wide
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
11
19 20
Once assembled lift furniture into place, do not drag. Use a drill to create a
small hole lining up with the top of the safety strap (V). Fasten to wall using
2x washers (Z), 2x wall anchors (X) and 2x screws (Y). Ensure unit is
balanced and steady before use. You’re done, enjoy!
X
Y
Z
X
Y
Zwall
anchor
screw
strap
washer
J
K
J
K
V
V
W
W
Z
Z
V
W
Z
J
K