Mocka Zander Round Side Table User manual

Zander Round Side Table
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
Hardware Supplied
long screw
x8
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
B
short screw
x4
C
foot pads
x4

12
Zander Round Side Table
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach panels [2] and [3] to panel [1] and secure with 4 x screws (B).
Tighten with a screwdriver.
Attach 4 x legs [4] to assembled frame and secure with 4 x screws (A).
Tighten with a screwdriver.
1
2
3
4
4
4
4
B
B
BB
A
A
A
A

3
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach panels [5] and [6] to assembled frame and secure with 4 x
screws (A), attach 4 x footpads (C) as shown, Tighten with a
screwdriver.
Lift the table into place, do not drag. You’re done, enjoy!
Zander Round Side Table
4
A
C
5
6