Mocka Harlin Kids Cabinet User manual

WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
C
dowel
x20
D
long
screw x4
A
bolt
x30
B
locking
nut x30
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
Z
XY
W
safety
strap
x2
screw
x2
long
screw
x2
wall
anchor
x2
washer
x2
Phillips & Flathead screwdrivers
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
E
small
screw x24
I
L + R slide
rail x6
F
medium
screw x12
H
L + R slide
rail x6
G
hinge
x2
J
shelf plug
x4
K
screw
x12
Harlin Kids Cabinet
1
mocka.co.nz |mocka.com.au |PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Insert 2 x bolts (A) into panel [3]. Attach 3 x L slide rails (I) to panel [3]
and secure with 6 x small screws (E). Attach 3 x R slide rails (I) to panel
[5] and secure with 6 x small screws (E). Tighten with a screwdriver.
I
I
I
I
I
II
I
A
A
Insert 6 x bolt (A) into panels [2], [4] and [5]. Tighten with a screwdriver.
A
A
2
Harlin Kids Cabinet
2
mocka.co.nz |mocka.com.au |PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions

34
Insert 4 x dowels (C) into panels [4] and [5]. Attach panels [4] and [5] to
panel [12] using 4 x long screws (D). Insert 2 x bolts (A) into panel [12].
Secure panel [13] to panel [12] with 2 x locking nuts (B). Tighten with a
screwdriver.
Insert 4 x dowels (C) into panels [4] and [5]. Attach panels [4], [11] and
[5] and secure with 4 x locking nuts (B). Tighten with a screwdriver.
11
Harlin Kids Cabinet
3
mocka.co.nz |mocka.com.au |PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions

56
Slide panel [14] between the grooves on panels [2] and [4]. Slide panel
[15] between the grooves on panels [4] and [5]. Slide panel [14]
between the grooves on panels [5] and [3] to form the back of the unit
as shown. Tighten with a screwdriver.
Insert 4 x dowel (C) into panel [2] and [3]. Attach panel [2] and [3] to
panel [12]. Secure with 4 x locking nut (B). Tighten with a screwdriver.
Harlin Kids Cabinet
Assembly Instructions
4
mocka.co.nz |mocka.com.au |PO BOX 6171, Maroochydore BC, QLD, 4558

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz |mocka.com.au
78
Attach panel [1] to panels [2], [4], [5] and [3] using 8x dowel (C) and
secure with 8x locking nuts (B). Tighten with a screwdriver
Insert 8 x bolts (A) into panel [1]. Attach 2 x safety straps (W) to panel [1]
and secure with 2 x screws (Y). Tighten with a screwdriver.
Harlin Kids Cabinet
Assembly Instructions
5
mocka.co.nz |mocka.com.au |PO BOX 6171, Maroochydore BC, QLD, 4558

910
Attach 2 x hinges (G) to panel [16]. Secure with 4 x screws (K). Tighten
with a screwdriver
K
G
K
G
Insert 4 x shelf plugs (J) into panels [2] and [4]. Slide panel [17] into place
as shown.
Harlin Kids Cabinet
Assembly Instructions
6
mocka.co.nz |mocka.com.au |PO BOX 6171, Maroochydore BC, QLD, 4558

11
Attach panels [7], [8] and [9] together using 4 x medium screws (F). Slide
panel [10] between the grooves on panels [7] and [8] to form the bottom
of the drawer as shown.
7
98
F
F
F
10
7
8
12 Drawers X3
Attach panel [16] to panel [2] as shown. Secure with 8 x screws (K).
Tighten with a screwdriver
NOTE: If the doors are uneven or
there is a gap in the middle, loosen
or tighten the screw on the door
hinge until they are sitting flush.
K
G
K
G
Harlin Kids Cabinet
Assembly Instructions
7
mocka.co.nz |mocka.com.au |PO BOX 6171, Maroochydore BC, QLD, 4558

13 Drawers X3 14
Insert each drawer into the unit as shown, ensuring they slide
smoothly and easily along the rails. Once assembled, lift furniture
into place, do not drag.
Insert 4x bolts (A) into the back of panel [6]. Attach panel [6] to
panel [7] and [8] with 4x locking nuts (B). Attach 2x slide rails (H) to
panels [7] and [8]. Secure with 4x small screw (E). Tighten with a
screwdriver.
7
8
E
H
H
E
E
7
8
6
B
B
6
6
A
A
A
A
A
A
Harlin Kids Cabinet
Assembly Instructions
8
mocka.co.nz |mocka.com.au |PO BOX 6171, Maroochydore BC, QLD, 4558

15
Move the unit into the desired location up against a wall. Use a drill to
create a small hole lining up with the top of the 2x safety strap (W).
Fasten to the wall using 2x wall anchor (X), 2x washer (Z) and 2x long
screw. Ensure the unit is balanced and steady before use. You’re done,
enjoy!
Harlin Kids Cabinet
Assembly Instructions
9
mocka.co.nz |mocka.com.au |PO BOX 6171, Maroochydore BC, QLD, 4558