Mocka Inca Console Table User manual

Inca Two Door Cabinet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
bolt
x8
x10
A B C D EFGH
JKL M N
I
Hardware Supplied
dowel
x12
screw
x6
hinge
x4
magnetic
bar
x2
O
screw
x24
P
locking
nut x8
screw
x4
wedge
x8
screw
Phillips & Flathead screwdrivers
bolt
x8
handle
x2
magnetic
x1
Allen
Key
x1
small
screw
x6
shelf plug
x4
Thank you for your purchase. Please follow the instructions for correct assembly.
While we took great effort to ensure these assembly instructions were correct at
the time of printing, sometimes updates are required post production. For the
most up to date versions please refer to the product page on our website.
mocka.com.au/mocka.co.nz

Inca Two Door Cabinet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
1
Insert 4x bolts (C) into panel [1] and tighten with a screwdriver.
C
C
C
C
3
4
1
1
6
7
2
14
5
5
8
11
11
9
10
12
13
10
9
Panel layout

Inca Two Door Cabinet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
2 3
C
C
C
C
A
A
A
AD
D
D
D
D
4
3
7
4
3
Insert 4x bolts (C) into panels [3] and [4]. Tighten with a screwdriver. Attach panels [3] and [4] to panel [7] with 4x dowels (A) and secure with
4x locking nuts (D). Tighten with a screwdriver.

Inca Two Door Cabinet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
54
A
A
A
D
D
D
5
5
8
3
4
1
3
4
Attach panels [5] together with connect sticks [8]. Slide panels [5]
down along the grooves between the panels [3] and [4].
Attach panel [1] to panels [3] and [4] with 4x dowels (A) and secure
with 4x locking nuts (D). Tighten with a screwdriver.

Inca Two Door Cabinet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
6 7
AA
K
N
K
A
A
B
B
B
B
B
14 3
4
2
3
4
1
Carefully turn the unit over. Slide panel [5] down along the grooves
between panels [3] and [4] as shown.
Attach panel [2] to panels [3] and [4] with 4x dowels (A) and secure
with 4x screws (B). Tighten with a screwdriver. Attach 1x magnetic
(N) to panel [1] secure with 2x screws (K). Tighten with a screwdriver.

Inca Two Door Cabinet
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
8 9
Assembly Instructions
L
L
L
L
L
L
L
L
II
I
I
I
I
L
G
I
11
11
11
11
9
9
9
2
9
10
10
Attach panels [11] to panels [9] and [10] secure with 8x bolts (L). Tighten
with an Allen Key (G).
Attach panels [9] and [11] to panel [2] and secure with 6x screws (I).
Tighten with a screwdriver.

Inca Two Door Cabinet
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
10
Assembly Instructions
E
E
E
M
M
F
OO
F
OO
EE
E
P
P
F
OO
F
OO
F
O
F
O
F
O
OO
F
12
13
12
13
3
4
NOTE: If the doors are
uneven or there is a gap
in the middle, loosen or
tighten the screw on the
door hinge until they are
sitting flush.
Attach 4x hinges (F) to panels [12] and [13] using 8x screws (O), and
attach 2x handles (M) to panels [12] and [13] secure with 4x screws (E).
Tighten with a screwdriver. Attach 2x magnetic bars (P) to panels [12]
and [13] secure with 2x screw (E). Tighten with a screwdriver.
Attach hinges on panels [12] and [13] to panels [3] and [4] and secure
with 16x screws (O). Tighten with a screwdriver.
11

Inca Two Door Cabinet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
1312
H
H
K
K
K
K
J
K
J
J
K
J
J
K
J
J
K
J
V
Z
W
V
Z
W
K
J
4
365
14
5
Insert 4x shelf plugs (H) into the unit at the desired height for the shelves
and rest the shelf panel [6] onto them. Ensure the shelves are balanced
and stable.
Attach 8x wedges (J) into the corners of the back of the unit and secure
with 8x screws (K). Tighten with a screwdriver. Attach 1x safety strap (V)
to the top of the back side of the unit as shown using 1x washer (Z) and
1x screw (W). Tighten with a screwdriver.

You’re done, enjoy!
Inca Two Door Cabinet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
1514
X
Y
Z
wall
anchor
screw
strap
washer
Attach panels [5] together with connect sticks [8]. Slide panels [5]
down along the grooves between the panels [3] and [4].
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the safety strap (V).
Fasten to the wall using 1x washer (Z), 1x wall anchor (X) and
1x wall screw (Y). Ensure unit is balanced and steady before
use.

Inca Two Door Cabinet
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
HOW TO ADJUST THE HINGES TO
ALIGN THE DOORS IF NEEDED.
Open the door.
1. 2. 3.
1. 2. 3.
1. 2. 3.
STEP 1
Adjust the door panelsupward or downward
STEP 2
Adjust the flush between door panel and side panel
STEP 3
Adjust the Gap beteen door
panel and side panel
STEP 4
Loosen this screw a bit. MOVE DOOR BACK OR
FORTH Re-tighten this screw.
Panel
Door
Unscrew 2 screws in round
holes loosen 2 screws in oval
holes a bit.
Tighten 2 screws in oval
holes. Screw in 2 screws in
round holes
MOVE DOOR UPWARD
OR DOWNWARD
MOVE DOOR OUTWARD
by turning this screw
counter-clockwise
KEEP DOOR IN RIGHT
POSITION MOVE DOOR OUTWARD
by turning this screw clockwise