Mocka Kai User manual

A B C D
Hardware Supplied
spring
washer x16
metal
plate x8
bolt
x16
allen
key x1
Before assembling, place all wooden furniture parts on a clean and
at surface to prevent scratches.
Do not fully tighten the nuts or nut bolts until all are in place.
To prevent thread damage, ensure that the nuts or nut bolts are
not over-tightened.
Keep hardware out of reach of children.
Kai Side Table
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Attach the table tops [1] to a table leg [2] as shown using 4x metal
plates (C). Secure using 8x bolts (A), 8x spring washers (B) and tighten
with the allen key (D).
Repeat Step 1 to attach the other table leg [2]. Carefully turn the table
onto its base, ensuring that it’s balanced and steady before use.
You’re done, enjoy!
A
1
B
C
D
AB
1
2
C
C
C
C
2
1 1
2
Kai Side Table
2
mocka.co.nz | mocka.com.au
Assembly Instructions
Note: The pre-drilled holes on Panel 2 are in different
positions, the holes closest to the edge of the panel
should face the bottom of the unit.