Mocka Kuranda User manual

Kuranda Cabinet - Tall
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
Hardware Supplied
bolt
x8
locking
nut x8
small
screw x3
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
A B CD E
NM
L
K
J
I
H
G
F
wedge
x8
screw
x8
long
screw x16
handle
screw x2
handle
x1
felt
pad x4
shelf plug
x4
door plug
x2
Allen key
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
required
magnetic
bar x1
magnetic
x1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
XWV
screw
x1
wall
screw
x1
safety
strap x1

Kuranda Cabinet - Tall
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
Insert 4x bolts (C) into panel [1]. Tighten with a screwdriver.
1
2
Attach 4x bolts (C) and 1x magnetic (B) to panel [2] with 2x small screws (E).
Tighten with a screwdriver.
C
C
C
C
CEE
B
C
C
C
EE
B

Kuranda Cabinet - Tall
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
3 4
33
4
4
6
5
5
Attach panels [3] and [4] to panels [5], secure with
8x long screws (A).Tighten with an allen key (I).
Slide panel [6] along the grooves between the panels [3]
and [4].
A
A
A
A
A
A
A
I

Attach panel [1] to panels [3] and [4], secure with 4x locking nut (D).
Tighten with a screwdriver.
Kuranda Cabinet - Tall
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
6
1
3
3
4
4
2
5
Attach panel [2] to panels [3] and [4], secure with 4x long screws (A).
Tighten with a screwdriver.
DD
D
A
A
A
A
D

Kuranda Cabinet - Tall
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
7 8
9
9
8
8
10
11
Attach panels [8] and [9] to panel [10], secure with 4x long screws (A).
Tighten with an allen key (I).
Slide panel [11] along the grooves between the panels [8] and [9].
A
A
A
A

Kuranda Cabinet - Tall
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
910
7
Attach panel [2] to panels [8] and [9], secure with 4x locking nuts (D).
Tighten with a screwdriver. Attach 4x felt pads (N) to panels [8] and [9].
Attach 1x magnetic bar (H) to door [7], secure with 1x screw (E).
Tighten with a screwdriver. Insert 2x door plugs (K) to door [7]
as shown.
E
K
K
H
E
H
29
8
D
N
N
N
N

Kuranda Cabinet - Tall
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
1211
2
10
7
7
Press door plugs (K) and attach door [7] to panels [2] and [10].
Make sure the door open and close easily.
Attach 1x handle (F) to panel [7], secure with
2x handle screws (G) and tighten with a screwdriver.
K
F
G
G
F
G
G

1
6
11
12
Kuranda Cabinet - Tall
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
13 14
Insert 4x shelf plugs (J) into the unit at the desired height for the shelves
and rest the shelf panel [12] onto them. Ensure the shelves are balanced
and stable.
Attach 8x wedges (L) into the corners of the back of the unit and secure
with 8x screws (M). Tighten with a screwdriver. Attach 1x safety strap (V),
1x washer (Z) to the top of the back side of the unit as shown using 1x
screw (W). Tighten with a screwdriver.
L
M
J
L
M
9
8
V
Z
W
V
Z
W

Kuranda Cabinet - Tall
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
15 16
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the safety strap (V).
Fasten to wall using 1x wall anchor (X) and 1x wall screw (Y), 1x
washer (Z). Ensure unit is balanced and steady before use.
You’re done, enjoy!
X
Y
Z
wall
anchor
screw
strap
washer