
EN - 6
•Your appliance is produced in accordance with all applicable
local and international standards and regulations.
•Maintenance and repair work should only be carried out by
authorised service technicians. Installation and repair work
that is carried out by unauthorised technicians may be
dangerous. Do not alter or modify the specifications of the
appliance in any way. Inappropriate hob guards can cause
accidents.
•Before connecting your appliance, make sure
that the local distribution conditions (nature of the gas and
gas pressure or electricity voltage and frequency) and the
specifications of the appliance are compatible. The
specifications for this appliance are stated on the label.
•This appliance is not connected to a ventilation device. It
should be installed and connected in accordance with
current installation regulations. Particular attention shall be
given to the relevant requirements regarding ventilation.
•If the burner has not lit after 15 seconds, stop operating the
device and open the compartment door. Wait at least 1
minute before attempting to ignite the burner again.
•These instructions are only valid if the correct country
symbol appears on the appliance. If the symbol does not
appear on the appliance, refer to the technical instructions
which describe how to modify the appliance to match the
conditions of use of the country.
•Do not use the oven door handles to lift or move the
appliance.
•All possible measures have been taken to ensure your
safety. Since the glass may break, care should be taken
while cleaning to avoid scratching. Avoid hitting or knocking
the glass with accessories.
•Make sure that the supply cord is not trapped or damaged
during installation. If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent or similarly
qualified persons in order to prevent a hazard.
•Do not let children climb on the oven door or sit on it while it
is open.
•Please keep children and animals away from this appliance.