montpellier MWM714W User manual

Freestanding 7kg 1400rpm Washing machine
MWM714W - White
Please read these instructions carefully before attempting to install or use this appliance.
We recommend that you keep these instructions in a safe place for future reference.
Installation and Operating Instructions
THE PERFECT BALANCE OF FUNCTION AND STYLE
LAUNDRY - DISHWASHING - COOKING - COOLING

We recommend that you keep this manual in a safe place for future
reference.
Your appliance is covered by a comprehensive two year Parts & Labour
Guarantee. In the unlikely event that you experience a problem with your
appliance, you can rest assured that you are fully protected against the cost of
repairs for the first 24 months . Please note that any claim must be accompanied
by the model reference number, serial number and proof of purchase.
To activate your guarantee, you will need your product serial number. This can
be found inside your appliance.
NB: Please make sure that you keep a copy of your original sales invoice as this
will be needed if any service call is required.
There are three ways to register your Guarantee:
•
•
Online: Visit the Support page on our website and complete the online
Product Registration form. www.montpellier-appliances.com
By Post: Simply detach and fill in the form provided, attach a stamp and send
it in the post. Don't forget to include your e-mail address so that we can send
confirmation through to you.
By Phone: Contact our warranty registration department on 0808 1961388
Welcome
Thank you for choosing this Montpellier appliance.
Our appliances have been designed to provide you with the best combination of style, reliability and performance to
give you years of trouble-free use.
You may be familiar with a similar product, but please take time to read these instructions carefully before installing or
using your appliance to ensure you get the most from your purchase.
ACROSS ALL OUR MODELS
YEAR
GUARANTEE
PA R T S & L A B O U R
www.montpellier-appliances.com
•
Thank you for choosing this product.
This User Manual contains important safety information and instructions on the operation and
maintenance of your appliance.
Please take the time to read this User Manual before using your appliance and keep this book for
future reference.
The design and specifications are subject to change without prior notice for product improvement.

3/ EN
Washing Machine / User’s Manual
1 Important instructions for safety and environment
This section contains safety instructions that will help protect from risk of personal
injury or property damage. Failure to follow these instructions shall void any warranty.
1.1 General safety
• This product can be used by children at and above 8 years old and by
persons whose physical, sensory or mental capabilities were not fully
developed or who lack expe-rience and knowledge provided that they are
supervised or trained on the safe usage of the product and the risks it brings
out. Children must not play with the product. Cleaning and maintenance
works should not be performed by children unless they are supervised by
someone. Children of less than 3 years should be kept away unless
continuously supervised.
• Never place the product on a carpet-covered floor. Otherwise, lack of airflow
beneath the machine will cause electrical parts to overheat. This will cause
problems with your product.
• If the product has a failure, it should not be operated unless it is repaired by
the Authorized Service Agent. There is the risk of electric shock!
• This product is designed to resume operating in the event of powering on
after a power interruption. If you wish to cancel the programme, see
"Cancelling the programme" section.
• Connect the product to a grounded outlet protected by a 13 A fuse. Do not
neglect to have the grounding installation made by a qualified electrician.
Our company shall not be liable for any damages that will arise when the
product is used without grounding in accordance with the local regulations.
• The water supply and draining hoses must be securely fastened and remain
undamaged. Otherwise, there is the risk of water leakage.
• Never open the loading door or remove the filter while there is still water in
the drum. Otherwise, risk of flooding and injury from hot water will occur.
• Do not force open the locked loading door. The loading door will be ready to
open just a few minutes after the washing cycle comes to an end. In case of
forcing the loading door to open, the door and the lock mechanism may get
damaged.
• Unplug the product when not in use.
• Never wash the product by spreading or pouring water onto it! There is the
risk of electric shock!
• Never touch the plug with wet hands! Never unplug by pulling on the cable,
always pull out by grabbing the plug.
• Use detergents, softeners and supplements suitable for automatic washing
machines only.
• Follow the instructions on the textile tags and on the detergent package.
• The product must be unplugged during installation, maintenance, cleaning
and repairing procedures.
• Always have the repairing procedures carried out by the Authorized Service
Agent. Manufacturer shall not be held liable for damages that may arise from
procedures carried out by unauthorized persons.

4 / EN Washing Machine / User’s Manual
• If the power cable is damaged, it must be replaced by the manufacturer,
after sales service or a similarly qualified person (preferably an electrician) or
someone designated by the importer in order to avoid possible risks.
• Place the product on a rigid, flat and level surface.
• Do not place it on a long-pile rug or similar surfaces.
• Do not place the product on a high platform or near the edge on a cascaded
surface.
• Do not place the product on the power cable.
• Never use sponge or scrub materials. These will damage the painted,
chrome plated and plastic surfaces.
• The water supply pressure required to run the product is between 1 to 10
bars (0.1– 1MPa)
• Do not use old or used water inlet hoses on the new product. It may cause
stains on your laundry.
• Never place the product on a carpet-covered floor. Otherwise, lack of airflow
beneath the machine will cause electrical parts to overheat. This will cause
problems with your product.
1.2 Intended use
• This product has been designed for domestic use. It is not suitable for
commercial use and it must not be used out of its intended use.
• The product must only be used for washing and rinsing of laundry that are
marked accordingly.
• The manufacturer waives any responsibility arisen from incorrect usage or
transportation.
• The service life of your product is 10 years. During this period, original spare
parts will be available to operate the appliance properly.
• This appliance is intended to be used in household and domestic
applications only.
1.3 Children's safety
• Packaging materials are dangerous to children. Keep packaging materials
in a safe place away from reach of the children.
• Electrical products are dangerous for the children. Keep children away from
the pro-duct when it is in use. Do not let them to tamper with the product.
Use child lock to prevent children from intervening with the product.
• Do not forget to close the loading door when leaving the room where the
product is located.
• Store all detergents and additives in a safe place away from the reach of
the children by closing the cover of the detergent container or sealing the
detergent package.
While washing the laundry at high temperatures, the loading
door glass becomes hot. Therefore, keep especially the
children away from the loading door of the machine while the
washing operation is in progress.

5/ EN
Washing Machine / User’s Manual
1.6 Compliance with WEEE Directive
This product complies with EU WEEE Directive (2012/19/EU). This
product bears a classification symbol for waste electrical and
electronic equipment (WEEE).
This product has been manufactured with high quality parts and
materials which can be reused and are suitable for recycling. Do not
dispose of the waste product with normal domestic and other
wastes at the end of its servi-ce life. Take it to the collection center
for the recycling of electrical and elec-tronic equipment. Please
consult your local authorities to learn about these collection centers.
Compliance with RoHS Directive:
The product you have purchased complies with EU RoHS Directive
(2011/65/EU). It does not contain harmful and prohibited materials
specified in the Directive.
1.4 Package information
• Packaging materials of the product are manufactured from recyclable
materials in ac-cordance with our National Environment Regulations. Do not
dispose of the packaging materials together with the domestic or other
wastes. Take them to the packaging material collection points designated by
the local authorities.
1.5 Disposing of the waste product
• This product has been manufactured with high quality parts and materials
which can be reused and are suitable for recycling. Therefore, do not
dispose the product with normal domestic waste at the end of its service life.
Take it to a collection point for the recycling of electrical and electronic
equipment. Please consult your local authorities to learn the nearest
collection point. Help protect the environment and natural resour-ces by
recycling used products. For children's safety, cut the power cable and break
the locking mechanism of the loading door so that it will be non-functional
before dis-posing of the product.

6/ EN
Washing Machine / User’s Manual
2 Installation
Refer to the nearest Authorised Service Agent for installation
of the product. To make the product ready for use, review
the information in the user manual and make sure that the
electricity, tap water supply and water drainage systems are
appropriatebeforecallingtheAuthorizedServiceAgent.If
they are not, call a qualified technician and plumber to have
any necessary arrangements carried out.
CPreparationofthelocationandelectrical,tapwaterand
waste water installations at the place of installation is
under customer's responsibility.
Make sure that the water inlet and discharge hoses
as well as the power cable are not folded, pinched or
crushed while pushing the product into its place after
installation or cleaning procedures.
Bwarning: Installationandelectricalconnectionsof
the product must be carried out by the Authorized
Service Agent. Manufacturer shall not be held liable for
damages that may arise from procedures carried out by
unauthorized persons.
Awarning: Priortoinstallation,visuallycheckiftheproduct
hasanydefectsonit.Ifso,donothaveitinstalled.
Damaged products cause risks for your safety.
2.1 Appropriate installation location
• Placethemachineonarigidfloor.Donotplaceitona
long pile rug or similar surfaces.
• Totalweightofthewashingmachineandthedryer-with
full load- when they are placed on top of each other
reachestoapprox.180kilograms.Placetheproduct
on a solid and flat floor that has sufficient load carrying
capacity!
• Donotplacetheproductonthepowercable.
• Donotinstalltheproductatplaceswheretemperature
mayfallbelow0ºC.
• Placetheproductatleast1cmawayfromtheedgesof
other furniture.
2.2 Removing packaging reinforcement
Tilt the machine backwards to remove the packaging
reinforcement. Remove the packaging reinforcement by
pulling the ribbon.
2.3 Removing the transportation locks
Awarning: Do not remove the transportation locks before
taking out the packaging reinforcement.
warning: Remove the transportation safety bolts before
operatingthewashingmachine!Otherwise,theproduct
will be damaged.
1.Loosenalltheboltswithasuitablespanneruntilthey
rotate freely (C).
2.Removetransportationsafetyboltsbyturningthem
gently.
3.AttachtheplasticcoverssuppliedintheUserManualbag
into the holes on the rear panel. (P)
CKeepthetransportationsafetyboltsinasafeplaceto
reuse when the washing machine needs to be moved
again in the future.
Never move the product without the transportation safety
bolts properly fixed in place!
2.4 Connecting water supply
CThe water supply pressure required to run the product is
between1to10bars(0.1–1MPa).Itisnecessaryto
have10–80litersofwaterflowingfromthefullyopen
tap in one minute to have your machine run smoothly.
Attach a pressure reducing valve if water pressure is
higher.
Awarning: Models with a single water inlet should not be
connectedtothehotwatertap.Insuchacasethelaundry
will get damaged or the product will switch to protection
mode and will not operate.
warning: Do not use old or used water inlet hoses on the
newproduct.Itmaycausestainsonyourlaundry.
1.Tightenallhosenutsbyhand.Neveruseatoolwhen
tightening the nuts.
2.Openthetapscompletelyaftermakingthehose
connection to check for water leaks at the connection
points.Ifanyleaksoccur,turnoffthetapandremovethe
nut. Retighten the nut carefully after checking the seal. To
prevent water leakages and damages caused by them,
keep the taps closed when the machine is not in use.
2.5 Connecting to the drain
• Theendofthedrainhosemustbedirectlyconnectedto
the wastewater drain or to the washbasin.

7/ EN
Washing Machine / User’s Manual
Awarning: Your house will be flooded if the hose comes
out of its housing during water discharge. Moreover, there
is risk of scalding due to high washing temperatures!
To prevent such situations and to ensure smooth water
intake and discharge of the machine, fix the end of the
discharge hose tightly so that it cannot come out.
• Thehoseshouldbeattachedtoaheightofatleast40
cm,and100cmatmost.
• Incasethehoseiselevatedafterlayingitonthefloor
levelorclosetotheground(lessthan40cmabovethe
ground), water discharge becomes more difficult and the
laundry may come out excessively wet. Therefore, follow
the heights described in the figure.
• Topreventflowingofdirtywaterbackintothemachine
and to allow for easy discharge, do not immerse the hose
end into the dirty water or do not drive it in the drain more
than15cm.Ifitistoolong,cutitshort.
• Theendofthehoseshouldnotbebent,itshouldnotbe
stepped on and the hose must not be pinched between
the drain and the machine.
• Ifthelengthofthehoseistooshort,useitbyadding
anoriginalextensionhose.Lengthofthehosemay
notbelongerthan3.2m.Toavoidwaterleakfailures,
the connection between the extension hose and the
drain hose of the product must be fitted well with an
appropriate clamp as not to come off and leak.
2.6 Adjusting the feet
Awarning: Inordertoensurethattheproductoperates
more silently and vibration-free, it must stand level and
balanced on its feet. Balance the machine by adjusting
thefeet.Otherwise,theproductmaymovefromitsplace
and cause crushing and vibration problems.
1.Loosenthelocknutsonthefeetbyhand.
2.Adjustthefeetuntiltheproductstandsleveland
balanced.
3. Tighten all lock nuts again by hand.
Awarning: Do not use any tools to loosen the lock nuts.
Otherwise,theywillgetdamaged.
2.7 Electrical connection
Connecttheproducttoagroundedoutletprotectedbya16
Afuse.Ourcompanyshallnotbeliableforanydamages
that will arise when the product is used without grounding in
accordance with the local regulations.
• Connectionmustcomplywithnationalregulations.
• Powercableplugmustbewithineasyreachafter
installation.
• Ifthecurrentvalueofthefuseorbreakerinthehouseis
lessthan16Amps,haveaqualifiedelectricianinstalla
16Ampfuse.
• Thevoltagespecifiedinthe"Technicalspecifications"
section must be equal to your mains voltage.
• Donotmakeconnectionsviaextensioncablesormulti-
plugs.
Bwarning: Damaged power cables must be replaced by
the Authorized Service Agents.
Transportation of the product
1.Unplugtheproductbeforetransportingit.
2.Removewaterdrainandwatersupplyconnections.
3. Drain all water that has remained in the product. (SEE
5.5)
4.Installtransportationsafetyboltsinthereverseorderof
removalprocedure;(SEE2.3)
CNever move the product without the transportation safety
bolts properly fixed in place!
Awarning:Packagingmaterialsaredangeroustochildren.
Keeppackagingmaterialsinasafeplaceawayfrom
reach of the children.

8/ EN
Washing Machine / User’s Manual
3 Preparation
3.1 Sorting the laundry
• Sortlaundryaccordingtotypeoffabric,colour,and
degree of soiling and allowable water temperature.
• Alwaysobeytheinstructionsgivenonthegarmenttags.
3.2 Preparing laundry for washing
• Laundryitemswithmetalattachmentssuchas,
underwired bras, belt buckles or metal buttons will
damage the machine. Remove the metal pieces or wash
the clothes by putting them in a laundry bag or pillow
case.
• Takeoutallsubstancesinthepocketssuchascoins,
pens and paper clips, and turn pockets inside out and
brush. Such objects may damage the product or cause
noise problem.
• Putsmallsizeclothessuchasinfant'ssocksandnylon
stockings in a laundry bag or pillow case.
• Placecurtainsinwithoutcompressingthem.Remove
curtain attachment items.
• Fastenzippers,sewloosebuttonsandmendripsand
tears.
• Wash“machinewashable”or“handwashable”labeled
products only with an appropriate programme.
• Donotwashcoloursandwhitestogether.New,dark
coloured cottons release a lot of dye. Wash them
separately.
• Toughstainsmustbetreatedproperlybeforewashing.If
unsure, check with a dry cleaner.
• Useonlydyes/colourchangersandlimescaleremovers
suitable for machine wash. Always follow the instructions
on the package.
• Washtrousersanddelicatelaundryturnedinsideout.
• KeeplaundryitemsmadeofAngorawoolinthefreezer
for a few hours before washing. This will reduce pilling.
• Laundrythataresubjectedtomaterialssuchasflour,
lime dust, milk powder, etc. intensely must be shaken off
before placing into the machine. Such dusts and powders
on the laundry may build up on the inner parts of the
machine in time and can cause damage.
3.3 Things to be done for energy saving
Following information will help you use the product in an
ecological and energy-efficient manner.
• Operatetheproductinthehighestcapacityallowedby
the programme you have selected, but do not overload;
see,"Programmeandconsumptiontable".
• Alwaysfollowtheinstructionsonthedetergent
packaging.
• Washslightlysoiledlaundryatlowtemperatures.
• Usefasterprogrammesforsmallquantitiesoflightly
soiled laundry.
• Donotuseprewashandhightemperaturesforlaundry
that is not heavily soiled or stained.
• Ifyouplantodryyourlaundryinadryer,selectthe
highest spin speed recommended during washing
process.
• Donotusedetergentinexcessoftheamount
recommended on the detergent package.
3.4 Initial use
Before starting to use the product, make sure that all
preparations are made in accordance with the instructions in
sections“Importantsafetyinstructions”and“Installation”.
To prepare the product for washing laundry, perform first
operationinDrumCleaningprogramme.Ifyourproduct
is not equipped with Drum Cleaning programme, perform
theInitialUseprocedureinaccordancewiththemethods
describedunder“5.2Cleaningtheloadingdoorandthe
drum”sectionoftheusermanual.
CUseananti-limescalesuitableforthewashingmachines.
Some water might have remained in the product due to
thequalitycontrolprocessesintheproduction.Itisnot
harmful for the product.
3.5 Correct load capacity
The maximum load capacity depends on the type of laundry,
the degree of soiling and the washing programme desired.
The machine automatically adjusts the amount of water
according to the weight of the loaded laundry.
Awarning: Followtheinformationinthe“Programme
andconsumptiontable”.Whenoverloaded,machine's
washing performance will drop. Moreover, noise and
vibration problems may occur.
3.6 Loading the laundry
1.Opentheloadingdoor.
2.Placelaundryitemslooselyintothemachine.
3.Pushtheloadingdoortocloseuntilyouhearalocking
sound. Ensure that no items are caught in the door.
CThe loading door is locked while a programme is running.
The door can only be opened a while after the programme
comes to an end.
Awarning: Incaseofmisplacingthelaundry,noiseand
vibration problems may occur in the machine.
3.7 Using detergent and softener
CWhen using detergent, softener, starch, fabric dye, bleach
or limescale remover read the manufacturer's instructions
on the package carefully and follow the suggested dosage
values.Usemeasuringcupifavailable.

9/ENWashing Machine /User’s Manual
Detergent Drawer
The detergentdrawer is composed of three compartments:
–(1) for prewash
–(2) for main wash
–(3) for softener
–(*) in addition, there is siphon piece in the softener
compartment.
1
3
2
Detergent,softener and other cleaning agents
•Add detergent and softener before starting the washing
programme.
•Never leave the detergent drawer open while thewashing
programme is running!
•When using a programme without prewash, do not
putany detergentinto the prewash compartment
(compartment nr. "1").
• In a programme with prewash, do not put liquid
detergent
into the prewash compartment (compartment nr. "1").
• Do not select a programme with prewash if you
areusing
a detergent bag or dispensing ball. Place the detergent
bag or the dispensing ball directly among the laundry in
the machine.
• If you are using liquid detergent, do not forget to place
the liquid detergent cup into the main wash compartment
(compartment nr. "2").
Choosingthe detergent type
The type of detergent to be used depends on the type and
colour ofthe fabric.
•Use different detergents for coloured and white laundry.
• Wash your delicate clothes only with special detergents
(liquid detergent,wool shampoo,etc.) used solely for
delicate clothes.
•When washing dark coloured clothes and quilts, it is
recommended to use liquid detergent.
• Wash woolens with special detergent made specifically
for woolens.
AWARNİNG: Use only detergents manufactured specifically
for washing machines.
WARNİNG: Do not use soap powder.
Adjustingdetergent amount
The amountof washing detergent to be used depends
on the amount of laundry, the degree ofsoiling and water
hardness.
• Do not use amounts exceeding the dosage quantities
recommended on the detergent package to avoid
problems ofexcessive foam, poorrinsing, financial
savings and finally, environmental protection.
•Use lesser detergent for small amounts or lightly soiled
clothes.
Usingsofteners
Pour the softener into the softener compartment of the
detergentdrawer.
• Do not exceed the (>max<) level marking in the softener
compartment.
• If the softener has lost its fluidity, dilute it with water
before putting it in the detergent drawer.
Usingliquiddetergents
If the product contains a liquid detergent cup:
If the product is equipped with a liquid detergent part:
•Make sure that you have placed the liquid detergent cup
in compartment nr. "2".
•If the liquid detergent has lost its fluidity, dilute it with
water beforeputting in the detergent cup.
If the product does not contain a liquid detergent
cup:
• Do
• When you want to use liquid detergent, pull the apparatus
towards yourself. The part that falls down will serve as a
barrier for the liquid detergent. If required, clean the
apparatus with water when it is in place or by removing it.
If you will use powder detergent, the apparatus must be
secured at top position.
not use liquid detergent for the prewash in a
programme with prewash.
•Liquid detergent stains your clothes when used with
Delayed Start function. If you are going to use the Delayed
Start function,donot useliquid detergent.
Using gel and tablet detergent
Apply the following instructions when using tablet, gel and
similar detergents.
• If the gel detergent thickness is fluidal and your machine
does notcontain aspecial liquid detergent cup,put the
gel detergentinto the main wash detergentcompartment
during first water intake. If your machine contains a liquid
detergentcup,fill the detergent into this cup before
starting the programme.
• If the gel detergent thickness is not fluidal or in the shape
of capsule liquid tablet,putitdirectly into thedrum before
washing.
•Put tablet detergents into the main wash compartment
(compartment nr. “2”) or directly into the drum before
washing.
CTablet detergents may leave residues in the detergent
compartment. If you encounter such a case, place the
tablet detergent between the laundry, close to the lower
part of the drum in futurewashings.
Use the tablet or gel detergent without selecting the
prewash function.
·

10 / ENWashing Machine /User’s Manual
•Wipe the inside of the machine with a damp and clean
cloth after using starch.
Using bleaches
•Select a programme with prewash and add the bleaching
agent at the beginning of the prewash.Do not put
detergent in the prewash compartment. As an alternative
application,selecta programmewith extra rinse and add
the bleaching agent while the machine is taking water
from the detergent compartment during first rinsing step.
• Do not use bleaching agent and detergent by mixing
them.
•Use just a little amount (approx. 50 ml) of bleaching agent
and rinse the clothes very well as it causes skin irritation.
Do not pour the bleaching agentonto the clothes and do
notuse it for coloured clothes.
•When using oxygen based bleaches, select a programme
that washes at a lower temperature.
•Oxygen based bleaches can be used together with
detergents; however, ifits thickness is notthe same
with the detergent, put the detergent first into the
compartment nr. “2” in the detergent drawer and wait
until the detergent flows while the machineis taking
in water. Add the bleaching agent from the same
compartment while the machine is still taking in water.
Using limescale remover
•When required, use limescale removers manufactured
specifically for washing machines only.
3.8 Tips forefficient washing
Clothes
(Recommended temperature rangebased
on soiling level: 40-90 °C)
Soiling Level
(difficult stains
such as grass,
coffee, fruits and
blood.)
It may be necessary to pre-treat the stains
or perform prewash. Powder and liquid
detergents recommended for whites can be
used at dosages recommended for heavily
soiled clothes. It is recommended to use
powderdetergents toclean clay and soil
stains and the stains that are sensitive to
bleaches.
Normally
(For example,
stains caused by
body on collars
and cuffs)
Powder and liquid detergents recommended
for whites can be used at dosages
recommended for normally soiled clothes.
(No visiblestains
exist.)
Powder and liquid detergents recommended
for whites can be used at dosages
recommended for lightly soiled clothes.
Clothes
Colours
(Recommended temperature rangebased
on soiling level: cold -40 °C)
SoilingLevel
Powder and liquid detergents recommended
for colours can beused at dosages
recommended for heavily soiled clothes. It is
recommended touse powderdetergents to
clean clay and soil stains and the stains that
are sensitive to bleaches. Use detergents
withoutbleach.
Normally
Powder and liquid detergents recommended
for colours can beused at dosages
recommended for normally soiled clothes.
Use detergents without bleach.
Powder and liquid detergents recommended
for colours can beused at dosages
recommended for lightly soiled clothes. Use
detergents withoutbleach.
Darkcolours
(Recommended temperature rangebased
on soiling level: cold -40 °C)
Soiling Level
Liquid detergents suitable for colours
and dark colours can be used at dosages
recommended for heavily soiled clothes.
Normally
Liquid detergents suitable for colours
and dark colours can be used at dosages
recommended for normally soiled clothes.
Liquid detergents suitable for colours
and dark colours can be used at dosages
recommended for lightly soiled clothes.
Delicates/Woollens/Silks
(Recommended temperature rangebased
on soiling level: cold -30 °C)
Soiling Level
Prefer liquid detergents produced for
delicate clothes. Woollen and silk clothes
must be washed with special woollen
detergents.
Normally
Prefer liquid detergents produced for
delicate clothes. Woollen and silk clothes
must be washed with special woollen
detergents.
Prefer liquid detergents produced for
delicate clothes. Woollen and silk clothes
must be washed with special woollen
detergents.
Usingstarch
•Add liquid starch, powder starch or the fabric dye into the
softener compartment.
• Do not use softener and starch together in a washing
cycle.

Detergent Recommendation
11 / EN Washing Machine / User’s Manual
Recommended
washing
detergent
Heavy-duty
detergent with
bleaching
agents and
optical
brighteners
Colour
detergent
without
bleaching
agent and
optical
brighteners
Color ormild
detergent
without
optical
brighteners
Mild
washing
detergent
Special wool
detergent
Wash cycles
Cotton、
Mix、
Bedding、
Stain、
20℃、ECO
40-60
Cotton、
Mix、
Underwear、
Bedding、
20℃、Quick
15’、Steam
Mix、Down
wear、Steam、
Quick15’、
Underwear
Silk、Down
wear、
Underwear
woolen
Washing
temp.
30/40/60
20/30/40
Cold/20/
30/40
Cold/20/30
20/30/40
Type of laundry
and textile
White laundry
made from
boil-proof cotton
or linen
Coloured laundry
made
from cotton or
linen
Coloured laundry
made
from easy care
fibres or
synthetic materials
Delicate
textiles, silk,
viscose
Wool
• Agglomerating or ropy detergent or additive can be
diluted in some water
detergent dispenser, to avoid its inlet to get blocked
before pouring it into the
and thus cause a water overflow.
• Please choose the suitable type of detergent to get a
maximum of washing performance and a minimum of
water and energy consumption
• To achieve the best cleaning result a proper detergent
dosing is important.
• Use a reduced detergent amount if the drum is not filled
completely.
• Always adjust the amount of detergent to the water
hardness, if your tap water is soft, use less detergent.
• Dose according to how dirty your laundry is, less dirty
clothes require less detergent.
• Highly concentrated (compact detergent) requires
particularly accurate dosing.
Followingsymptoms area signof detergent
overdosing:
• heavy foam formation
• poor washing and rinsing result
Followingsymptoms area signof detergent
underdosing:
• laundry turns grey
• built-up of limescale deposits on the drum, the heating
element and/or the laundry

12 / EN Washing Machine / User’s Manual
4 Operating the product
4.1 Control panel
5 - Start / Pause button
6 - Auxiliary Function buttons
7 - Spin Speed Adjustment button
8 - Temperature Adjustment button
1 - Programme Selection knob (Uppermost position On / Off)
2 - Display
3 - Smart button
4 - Programme Follow-up indicator
4.2 Preparing the machine
machine.Add detergent and fabric softener.
4.3 Programme selection
and soiling degree of the laundry in accordance with
temperature table below.
Heavily soiled white cottons and linens. (coffee table
covers, tableclothes, towels, bed sheets, etc.)
Normally soiled, coloured, fade proof linens, cottons or
synthetic clothes (shirt, nightgown, pajamas, etc.) and
lightly soiled white linens (underwear, etc.)
20°C-
Cold
Blended laundry including delicate textile (veil curtains,
etc.), synthetics and woolens.
Selection button.
Cappropriate for that particular type of fabric.
When selecting a programme, always consider the type
of fabric, colour, degree of soiling and permissible water
temperature.
Always select the lowest required temperature. Higher
temperature means higher power consumption.
4.4
Depending on the type of fabric, use the following main
programmes.
•Cotton
Use this programme for your cotton laundry (such as bed
sheets, duvet and pillowcase sets, towels, bathrobes,
underwear, etc.). Your laundry will be washed with vigorous
washing action for a longer washing cycle.
• Woolen
Use this programme to wash your woolen clothes. Select
the appropriate temperature complying with the tags of your
clothes. Use appropriate detergents for woolens.
Program introduction
•Down Wear
The process of down wear、is specially designed for washing
down jacket. The material of down jacket is light, difficult to
rinse, poor anti washing ability, and difficult to absorb water.
Therefore, it is necessary to extend the soaking time in the
washing process, and reduce the rotation speed during
dehydration.
1 2 3
4
5
6
8 7

13 / EN Washing Machine / User’s Manual
4.6 Temperature selection
Whenever a new program is selected, the default
temperature of the selected program is displayed in the
temperature indicator. To adjust the temperature, press
the temperature button. The temperature will gradually
increase and cycle to the lowest when the maximum is
reached.
4.7 Spin speed selection
Whenever a new program is selected, the default
dehydration speed of the selected program is displayed
on the speed indicator. To adjust the dehydration
speed, press the speed button. The rotation speed
increases gradually and circulates to the lowest when it
reaches the highest.
CIf the programme has not reached the heating step,
you can change the temperature without switching the
machine to Pause mode.
•
•
•
Mix
Use this programme to wash your cotton and synthetic clothes
together without sorting them.
•Bedding
The main washing objects of the program are bed sheets, quilt
covers, curtains, overcoats and tablecloths and so on. In the
washing process, the soaking time and washing time of the
load are increased to improve the washing effect.
•Drum Clean
Periodically (every 1-2 months) use this program to clean the
drum for necessary sanitation cleaning. Let the washing
machine run the programme without any laundry. For better
results, add powdered limescale cleaning agent to the
detergent box. After the program, leave the front door ajar and
let the inside of the machine dry.
•Stain
For the clothes with more stubborn stains, the washing effect
can be improved by longer washing time and strong washing
rhythm.
•Underwear
Underwear program is a special program for washing
underwear and other close fitting clothes. The washing rhythm
is weak. At the same time, in order to ensure the rinsing
performance and prevent detergent residue, the rinsing
intensity is required to be higher.
•Silk
You can choose this programme to wash delicate fabrics such
as silk. The wash is very gentle, and the spin step is not done
right away. This programme is best if the laundry requires a
gentle wash.
•Steam
Steam washing process is to produce steam in the washing
process, improve the washing effect, and at the same time,
steam iron the clothes to prevent wrinkles.
•Quick 15’
Quickwash 15 is a fast washing program fora small amount of
non dirty clothes. Its optional washing temperature range is
narrow and the maximum speed of dehydration is low.
New European standard special program, used to wash some
mild clothes, the temperature can only be selected at 20 ℃,
to protect the clothes
20℃
For washing cotton garments that are normally washable at
40°C or 60°C, while washing in the same cycle. This cycle
is used to assess compliance with EU ecodesign regulations.
ECO 40-60
4.5 Special programmes
For specific applications, select any of the following
programmes.
CUse a lower spin speed for delicate laundries.
• Rinse & Spin
A program designed for users to rinse and dehydrate
• Spin
Use this programme to apply an additional spin cycle for
your laundry or to drain the water in the machine.
Before selecting this programme, select the desired spin
speed and press Start / Pause button. First, the machine
will drain the water inside of it. Then, it will spin the laundry
with the set spin speed anddrain the water coming out of
them. If you wish to drain only the water without spinning
your laundry, select the Pump+Spin programme and then
select the No Spin function with the help of Spin Speed
Adjustment button. Press Start / Pause button.

/ EN Washing Machine / User’s Manual
4.8 Programme and consumption table
• : Selectable
* : Automatically selected, no canceling.
Mix 30
Max.
1.5
•• • Cold-60
Quick 15′1
3.5
Cold
3.5
•• •
Silk Cold •• • Cold-40
Bedding 30 •• • Cold-60
Underwear40 •
•
•• Cold-90
Rinse & Spin - Max.
2
3.5
•-
Spin - Max.
Max.
Max.
20
•-
ECO 40-60 40 •
Stain 60 •• • 40-60
Cotton 40
AUTO
•• • Cold-90
Down Wear 30 •• • Cold-40
Woolen 30 •• • Cold-40
Steam 90 •• 90
40
20℃•• • 20
Drum Clean 90 0
•
•
90
Smart Max. AUTO
Programme
Rinse+
Wash+
Delay Selectable temperature range °C
AuxiliaryfunctionsEN
Max.load(kg)
1.5
Cold-30
2
3.5

4. Auxiliary function selection
Select the desired auxiliary functions before starting the
programme. Furthermore, you may also select or cancel
auxiliary functions that are suitable to the running
programme without pressing the Start / Pause button
when the machine is operating. For this, the machine
must be in a step before the auxiliary function you are
going to select or cancel.If the auxiliary function cannot
be selected or canceled, light of the relevant auxiliary
function will blink 3 times to warn the user.
CAdditional laundry may be loaded during the delayed
start period.
• Wash+
In the standby mode, press the enhanced washing functi
on
setting button,the Strengthen washing function indicator will
be on, and the Strengthen washing function will be added in
the washing process. After selecting the Strengthen
washing function, the washing time in the main washing
stage will be increased by 10 minutes, and the time after
adding the Strengthen washing function will be displayed in
the remaining time window. If you press it again, the
Strengthe n washing function will be cancelled.
Open the loading door, place the laundry and put detergent,
etc. Select the washing programme, temperature, spin
speed and, if required, the auxiliary functions. Set the
desired time by pressing the Delay button. Press Start /
Pause button. The delayed start time you have set is
displayed. Delayed start countdown starts. The‘:’ in the
display time blinks once every second, and the time
gradually decreases.
CDo not use liquid detergents when you set Delayed
Start! There is the risk of staining of the clothes.
At the end of the countdown, duration of the selected
programme will be displayed. ‘:’symbol will disappear and
the selected programme will start.
Canceling the Delayed Start function
If you want to cancel the delayed start countdown and start
the programme immediately:
Set the Delayed Start period to zero or turn the Programme
Selection knob to any programme. Thus, Delayed Start
function will be canceled. The End/Cancel light flashes
continuously. Then, select the programme you want to run
again. Press Start / Pause button to start the programme.
4.10 Starting the programme
Press Start / Pause button to start the programme.
Programme follow-up light showing the startup of the
programme will turn on.
C
4.11 Child Lock
Use Child Lock function to prevent children from tampering
with the machine.Thus you can avoid any changes in a
running programme.
CIf the Programme Selection knob is turned when the
Child Lock is active,“ ” appears on the display. The
Child Lock does not allow any change in the
programmes and the selected temperature, speed and
auxiliary functions.
Even if another programme is selected with the
Programme Selection knob while the Child Lock is
active, previously selected programme will continue
running.
• Rinse+
Press the rinse Plus button in standby mode, and the rinse
plus function indicator will be on. At the same time, add a
rinse process in the washing process, and the time after
adding the function will be displayed in the remaining time
window. The rinse function will cancelled when it is
pressed again, if it does not run to the rinse stage during
operation, press the pause button, The rinsing button can
be added or cancelled, and the rinsing function cannot be
selected or cancelled during operation.
• Smart Start
The smart start program is an intelligent program, which
can be entered and run automatically in the standby and
power off states. Under the smart start program, the
washing temperature, water level and washing time are
automatically set according to the weighing results, and
the washing parameters do not need to be set by the user.
• Delay
With the Delayed Start function the startup of the
programme may be delayed up to hours. Delayed start
time can be increased by increments of 1 hour.
To activate the Child Lock:
Press and hold 3st and 4nd Auxiliary Function buttons for 3
seconds while any programme is running. The Child Lock is
activated. If you press any button or turn the Programme
Selection knob when the Child Lock is active, "CL" will
appear on the display and blink 3 times.
To deactivate the Child Lock:
erP ss and hold 3st and 4nd auxiliary function buttons for
3 seconds while any programme is running. The Child
Lock is deactivated.
C
Child Lock is not deactivatedafter power failures or
when the machine is unplugged.
In addition to the above way, to remove the child lock,there
are two ways:
1. The program is automatically removed after running.
2. The alarm will be automatically lifted.
/ EN Washing Machine / User’s Manual

Changing the speed and temperature settings for
auxiliary functions
Depending on the step the programme has reached, you
may cancel or activate the auxiliary functions; see, "Auxiliary
function selection".
You may also change the speed and temperature settings;
see, "Spin speed selection" and "Temperature selection".
4.15 Canceling the programme
To cancel the programme, turn the Programme Selection
knob to select another programme. Previous programme
will be canceled. End/ Cancel light will flash continuously
to notify that the programme has been canceled.
Pump function is activated for 1-2 minutes regardless of
the programme step, and whether there is water in the
machine or not. After this period, your machine will be
ready to start with the first step of the new programme.
CDepending on the step where the programme was
canceled in, you may have to put detergent and
softener again for the programme you have selected
anew.
4.16 End of programme
“End” appears on the display at the end of the programme.
Wait until the loading door light illuminates steadily. Press On
/ Off button to switch off the machine.Take out your laundry
and close the loading door. Your machine is ready for the
next washing cycle.
Adding or taking out laundry
Press the Start / Pause button to switch the machine to
pause mode.The programme follow-up light of the relevant
step during which the machine was switched into the pause
mode will flash.Wait until the Loading Door can be opened.
Open the Loading Door and add or take out the laundry.
Close the Loading Door. Make changes in auxiliary functions,
temperature and speed settings if necessary. Press Start /
Pause button to start the machine.
CIf the machine does not pass to the spinning step, Rinse
Hold function might be active or the automatic unbalanced
load detection system might be activated due to the
unbalanced distribution of the laundry in the machine.
4.12 Progress of programme
Progress of a running programme can be followed from the
Programme Follow-up indicator. At the beginning of every
programme step, the relevant indicator light will turn on and
You can change the auxiliary functions, speed and
temperature settings.
while the programme is running.
To do this, the changeyou are going to make must be
in a step after the running programme step. If the change is
not compatible,press the relevant key sound prompt tone.
the indicator light that completes the step will be on.
You need to stop the program flow
before changing the auxiliary functions, speed, and
emperature settings
4.13 Loading door lock
There is a locking system on the loading door of the
machine that prevents opening of the door in cases when
the water level is unsuitable.
Loading door light will start flashing when the machine
is switched to Pause mode. Machine checks the level of
the water inside. If the level is suitable, Loading Door light
illuminates steadily within 1-2 minutes and the loading door
can be opened.
If the level is unsuitable, Loading Door light turns off and the
loading door cannot be opened. If you are obliged to open
the Loading Door while the Loading Door light is off, you
have to cancel the current programme; see "Canceling the
programme".
4.14 Changing the selections after
programme has started
Switching the machine to pause mode
Press the Start / Pause button to switch the machine to
pause mode while a programme is running. The light of
the step which the machine is in starts flashing in the
Programme Follow-up indicator to show that the machine
has been switched to the pause mode.
Also, when the loading door is ready to be opened,
procedure step light is steady on, door lock light is off.
CIf no change is allowed, the indicator light will be on.
/ EN Washing Machine / User’s Manual

17 / EN
Washing Machine / User’s Manual
CUseananti-limescalesuitableforthewashingmachines.
After every washing make sure that no foreign substance is
left in the drum.
Iftheholesonthebellowshowninthefigureisblocked,
open the holes using a toothpick.
CForeign metal substances will cause rust stains in the
drum. Clean the stains on the drum surface by using
cleaning agents for stainless steel. Never use steel wool
or wire wool.
Awarning: Never use sponge or scrub materials.These
will damage the painted and plastic surfaces.
5.3 Cleaning the body and control panel
Wipe the body of the machine with soapy water or non-
corrosive mild gel detergents as necessary, and dry with a
soft cloth.
Useonlyasoftanddampclothtocleanthecontrolpanel.
5.4 Cleaning the water intake filters
There is a filter at the end of each water intake valve at the
rear of the machine and also at the end of each water intake
hose where they are connected to the tap. These filters
prevent foreign substances and dirt in the water to enter the
washing machine. Filters should be cleaned as they do get
dirty.
1.Closethetaps.
2.Removethenutsofthewaterintakehosestoaccess
the filters on the water intake valves. Clean them with an
appropriatebrush.Ifthefiltersaretoodirty,takethemout
by means of pliers and clean them.
5 Maintenance and cleaning
Service life of the product extends and frequently faced
problems decrease if cleaned at regular intervals.
5.1 Cleaning the detergent drawer
Clean the detergent drawer at regular intervals (every
4-5 washing cycles) as shown below in order to prevent
accumulation of powder detergent in time.
1.Pressthedottedpointonthesiphoninthesoftener
compartment and pull towards you until the compartment
is removed from the machine.
CIfmorethannormalamountofwaterandsoftener
mixture starts to gather in the softener compartment, the
siphon must be cleaned.
2.Washthedetergentdrawerandthesiphonwithplentyof
lukewarm water in a washbasin. Wear protective gloves
or use an appropriate brush to avoid touching of the
residues in the drawer with your skin when cleaning.
3.Insertthedrawerbackintoitsplaceaftercleaningand
make sure that it is seated well.
Ifyourdetergentdraweristheoneindicatedinthefollowing
figure:
CLifttherearpartofthesiphontoremoveitasillustrated.
After performing the above mentioned cleaning
procedures, replace the siphon back to its seating and
push its front section downwards to make sure that the
locking tab engages.
5.2 Cleaning the loading door and the drum
For products with drum cleaning programme, please see
Operatingtheproduct-Programmes.
For products without drum cleaning, follow the below steps
to clean the drum:
Select Additional Water or Extra Rinse auxiliary
functions.UseaCottons programme without pre-wash.
Set the temperature to the level recommended on the
drum cleaning agent which can be provided from
authorized services. Apply this procedure without any
laundry in the product. Before starting the programme,
put1pouchofspecialdrumcleaningagent(ifthespecial
agentcouldnotbesupplied,putmax.100gofpowder
anti-limescale) into the main wash detergent compartment
(compartmentno.“2”).Iftheanti-limescaleisintabletform,
putonlyonetabletintothemainwashcompartmentno.“2”.
Dry the inside of the bellow with a clean piece of cloth after
the programme has come to an end.
CRepeatDrumCleaningprocessinevery2months.

18 /EN Washing Machine / User’s Manual
3. Take out the filters on the flat ends of the water intake
hoses together with the gaskets and clean thoroughly
under running water.
4. Replace the gaskets and filters carefully in their places
and tighten the hose nuts by hand.
5.5 Draining remaining water and
cleaning the pump filter
The filter system in your machine prevents solid items
such as buttons, coins and fabric fibers clogging the pump
impeller during discharge of washing water. Thus, the water
will be discharged without any problem and the service life
of the pump will extend.
If the machine fails to drain water, the pump filter is clogged.
Filter must be cleaned whenever it is clogged or in every 3
months. Water must be drained off first to clean the pump
filter.
In addition, prior to transporting the machine (e.g., when
moving to another house) and in case of freezing of the
water, water may have to be drained completely.
AWARNING : Foreign substances left in the pump filter may
damage your machine or may cause noise problem.
In order to clean the dirty filter and discharge the water:
1. Unplug the machine to cut off the supply power.
AWARNING : Temperature of the water inside the machine
may rise up to 90 ºC.To avoid burning risk, filter must be
cleaned after the water in the machine cools down.
2. Open the filter cap.
CYou can remove the filter cover by slightly pushing
downwards with a thin plastic tipped tool, through the
gap above the filter cover. Do not use metal tipped tools
to remove the cover.
3. Some of our products have emergency draining hose and
some does not have. Follow the steps below to discharge
the water.
Discharging the water when the product does not have an
emergency draining hose:
a. Place a large container in front of the filter to catch water
from the filter.
b. Loosen pump filter (anticlockwise) until water starts to
flow. Fill the flowing water into the container you have
placed in front of the filter. Always keep a piece of cloth
handy to absorb any spilled water.
c. When the water inside the machine is finished, take out
the filter completely by turning it.
4. Clean any residues inside the filter as well as fibers, if
any, around the pump impeller region.
5. Install the filter.
6. If the filter cap is composed of two pieces, close the filter
cap by pressing on the tab. If it is one piece, seat the tabs
in the lower part into their places first, and then press the
upper part to close.
Clean the interior of the pump hosing, removing any debris
or foreign objects.periodic cleaning, including optimal
frequency, and limescale prevention and procedure.
If the appliance water supply slows or stops completely, the
water inlet strainer may be blocked. Cleaning is
recommended every 6 months in any event to reduce
chances of valve blockage in areas using hard water.
5.6 Regular cleaning

6 Technical specifications
Model name
220-240V~/50Hz
1400
50
66
Capacity (kg)
Maximum spin speed (rpm)
Height (cm)
Width (cm)
Depth (cm)
84
7
60
Net weight (±4 kg.)
• input (V/Hz) Total
19 /EN Washing Machine / User’s Manual
MWM714W

20 / EN
Washing Machine / User’s Manual
7 Troubleshooting
Program does not start after closing the door.
• Start / Pause / Cancel button was not pressed.>>> *Press the Start / Pause / Cancel button.
Programme cannot be started or selected.
• Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.). >>> To cancel the
programme, turn the Programme Selection knob to select another programme. Previous programme will be cancelled. (See “Canceling
the programme”)
Water in the machine.
• Some water might have remained in the product due to the quality control processes in the production. >>> This is not a failure; water is
not harmful to the machine.
Machine vibrates or makes noise.
• Machine might be standing unbalanced. >>> Adjust the feet to level the machine.
• A hard substance might have entered into the pump filter. >>> Clean the pump filter.
• Transportation safety bolts are not removed. >>> Remove the transportation safety bolts.
• Laundry quantity in the machine might be too little. >>> Add more laundry to the machine.
• Machine might be overloaded with laundry. >>> Takeout some of the laundry from the machine or distribute the load by hand to
balanceit homogenously in the machine.
• Machine might be leaning on a rigid item. >>> Makesure that the machine is not leaning on anything.
Machine stopped shortly after the programme started.
• Machine might have stopped temporarily due to low voltage. >>> It will resume running when the voltage restores to the normal level.
Programme time does not countdown. (On models with display)
• Timer may stop during water intake. >>> Timer indicator will not countdown until the machine takes in adequate amount of water. The
machine will wait until there is sufficient amount of water to avoid poor washing results due to lack of water. Timer indicator will resume
countdown after this.
• Timer may stop during heating step.>>> Timer indicator will not countdown until the machine reaches the selected temperature.
• Timer may stop during spinning step. >>> Automatic unbalanced load detection system might be activated due to the unbalanced
distribution of the laundry in the drum.
• Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and
to its surrounding environment. Laundry should be rearranged and re-spun.
Foam is overflowing from the detergent drawer.
• Too much detergent is used. >>> Mix 1 tablespoonful softener and ½ l water and pour into the main wash compartment of the
detergent drawer.
• Put detergent into the machine suitable for the programmes and maximum loads indicated in the “Programme and consumption table”.
When you useadditional chemicals (stain removers, bleachs and etc), reduce the amount of detergent.
Laundry remains wet at the end of the programme
• Excessive foam might have occurred and automatic foam absorption system might have been activated due to too much detergent usage.
>>> Use recommended amount of detergent.
• Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and
to its surrounding environment. Laundry should be rearranged and re-spun.
AWARNİNG : If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the
Authorized Service Agent. Never try to repair a nonfunctional product yourself.
Customer service
AWARNİNG : Risk of electric shock
•Never try repair an appliance which is defective of presumed to be defective.
You may put your own and future users' lives in danger.Only authorised specialists are allowed to carry out this repair work.
•Improper repair will void the warranty and subsequent damages can't be recogniced!
Spare part for your appliance are available for a minimum of 10 years.
7.1