MOTO GUZZI V7 CLASSIC User manual

Istruzioni di montaggio portapacchi W
Mounting instructions W rear carrier
o ,-'
{*

Istruzioni di montaggio wrtawcffi
,..M o Y ntin.#.i nstru cti o ns_V7 rear carrier
Thank you for choosing lloto Guzzi genuine access ories. It is extremely important
that the accessones are instatted colrectly,p/ease read carefuyy the foltowing
i nstructions hefore attempti ng the i nstattation
lmproper instartation of acc.essoriel ca1 severery compromise the safety of your
vehicre. rmproper instartation can read to a losslrsab nitv ii ii""t iiixiip, *nn
subseguenf s erious acci dent and inj ury o, enei ieath. t vou n"ii"ni qil"tio,
about the proper instattation.o-1v9uinloto auzzi genuine accessory, do not ride
your
vehicte' .Take it to your .ocar Moto Guzzi dearer iho wi, have n;;;;;.;;;b bots
and equipment to property and safely instalt your accessory.
For all load-carrying accessones, such as tuggage hoxes or saddre bags, arways
observe the recommended loading ana attai'niillnstructions. Faiture to heecr this
warnilg can-read to a degradatioi in vehicre haidring, win suoseqi"ri iircrc
upset, accidenf, senbus injury or even death. YYe"' 'e"
I
/

Istruzioni di montaggio portapacchi V7
Mounti ng instructions V7 rear carrier
Make sure the engine and the heated parts of the bike are cold before carrying out the
following instructions
- Position the motorcycle on a solid, flat surface
- Remove the seat from its housing by turning the clockwise.
- Remove the side handles by unscrewing M6 screws located at the top of the shock
absorbers, and the M8 nub located at the side of tlre passenger,s seai
- Position the carrier in place of the handles, and paftially screw the M6 screws and
the M8 nuts previously removed
- Fasten the MG screws at 10Nm tightening torque and the M8 nuts at 2SNm.
" Maximum allowed load 3 kg (6.6 lb)
Note: the rear carrter can be instalted also in presence of theside bags, using the
dedicated supports supplied with them