Motorola PIP1200 User manual

PIP1200
2.8" Video Baby Monitor
User Guide
For: PIP1200, PIP1200-2, PIP1200-3 and PIP1200-4

Welcome...
• 1 x Parent Unit
• 1 x Baby Unit (Camera)
• 1 x Rechargeable Li-ion battery pack for the Parent Unit
• 1 x Battery door for Parent Unit
• 2 x Power adapters for the Parent and Baby units
In multi-camera packs, you will find one or more additional
baby units with power adapter units.
to your new Motorola Digital Video Baby Monitor!
Thank you for purchasing the video baby monitor. Now
you can see and hear your baby sleeping in another room
or you can monitor your older children in their playroom.
Please retain your original dated sales receipt for your
records. For warranty service of your Motorola product, you
will need to provide a copy of your dated sales receipt to
confirm warranty status. Registration is not required for
warranty coverage.
For product related questions, please contact us by visit
at:
This User's Guide provides you with all the information you
need to get the most from your product.
Before you can use the baby monitor, we recommend you
insert and fully charge the battery in the Parent Unit, so
that it continues to work if you disconnect it from the
power supply to carry it to another location. Please read
the Safety Instructions on pages 7 - 9 before you install the
units.
Got everything?
motorolanursey.com

Overview of the Parent Unit
9
10
1. Screen display
2. Dual sound level indications
(front and top view)
3. Power button
Press and hold to turn on or o.
Press to turn the screen on or o.
4. Menu button
Press to open the menu.
5. OK / Zoom button
Press to confirm a selection/zoom
in or out.
6. Navigation button
Adjust menu settings/press left
or right to select the parent
unit's volume level.
7. Volume / Back button
8. Talk back button
Press and hold to talk to the baby.
9. Antenna
10. Speaker
1
2
5
6
7
8
4
3

Parent Unit menu icons
Adjust LCD brightness
Set the alarm
Temperature unit °C or °F selection and high/low detection
Screen on/off timer
Play lullaby
Add camera
Delete camera
View multiple cameras (not applicable for single camera)
x
+
Parent Unit status icons
Signal strength
Battery level indication
Zoom in
Alarm set
Playing lullaby
Speaker o
Talk back
Night vision
Cycle view from camera
Camera selected

Overview of Your Baby Unit
Important guidelines for installing your Video Baby Monitor
• To use your Baby Unit and Parent Unit together, you must be able to
establish a radio link between them, and the range will be aected by
environmental conditions.
•Any large metal object, like a refrigerator, a mirror, a filing cabinet, a metallic
door or reinforced concrete, between the Baby Unit and Parent Unit may
block the radio signal.
• The signal strength may also be reduced by other solid structures, like walls,
or by radio or electrical equipment, such as TVs, computers, cordless or
mobile phones, fluorescent lights or dimmer switches.
• Other 2.4GHz products, such as wireless networks (Wi-Fi® routers),
Bluetooth™ systems, microwave ovens or other Baby Monitors, may cause
interference with this product, so keep the Baby Monitor at least 5ft (1.5m)
away from these types of product, or switch them o if they appear to be
causing interference.
• If the signal is weak, try moving the Parent and/or the Baby Unit to dierent
positions in the rooms.
13
5
4
6
7
2
1. Camera
2. Base
3. Speaker
4. Antenna
5. Power jack
6. Power / Linking LED indicator
Lights up in blue when the parent unit
is powered on and linked to the baby
(camera) unit.
7. Pair button
Press and hold to pair with the parent unit.

6Table of contents
Table of contents
1.Safety Instructions ................................................................................................ 7
2. Getting Started....................................................................................................... 10
2.1 Baby Unit Power Supply......................................................................... 10
2.2 Parent Unit Battery Installation ........................................................... 11
2.3 Parent Unit Power Supply ..................................................................... 12
2.4 Desktop Stand of the Parent Unit ...................................................... 13
3. Using the Baby Monitor........................................................................................ 14
3.1 Setting Up...................................................................................................... 14
3.2 Power On or Off the Baby Unit ............................................................ 14
3.3 Power On or Off the Parent Unit ........................................................ 14
3.4 Night Vision Mode .................................................................................... 15
3.5 Turn off Parent Unit LCD Screen ......................................................... 15
4. Parent Unit Menu Options .................................................................................. 16
4.1 Adjust Speaker Volume ........................................................................... 16
4.2 LCD Brightness .......................................................................................... 16
4.3 Set Alarm Time on the Parent Unit...................................................... 16
4.4 Monitor the Temperature ....................................................................... 17
4.5 Remove a Baby Unit from the Parent Unit....................................... 18
4.6 Set Screen Off time for the Parent Unit ............................................ 18
4.7 Zoom, Pan or Tilt ....................................................................................... 18
4.8 Pair and Replace a Baby Unit ............................................................... 19
4.9 Multi-Camera Use ...................................................................................... 19
5. Disposal of the Device (environment) ........................................................... 20
6. Cleaning ..................................................................................................................... 21
7. Troubleshooting ..................................................................................................... 22
8. General Information .............................................................................................. 24
9. Technical Specifications ..................................................................................... 29

Safety Instructions 7
1.Safety Instructions
WARNING:
STRANGULATION HAZARD - Keep the
unit and adaptor cord more than 3 feet
from the crib and out of the baby's
reach. NEVER place Baby Unit or cords
within the crib. Secure the cords more
than 3 feet away from the baby's reach.
Never use extension cords with AC
Adaptors. Only use the AC Adaptors
provided.

8Safety Instructions
WARNING
This Baby Monitor is compliant with all relevant standards regarding
electromagnetic fields and is, when handled as described in the User's Guide,
safe to use. Therefore, always read the instructions in this User's Guide carefully
before using the device.
• Adult assembly is required. Keep small parts away from children when
assembling.
• This product is not a toy. Do not allow children to play with it.
• This Baby Monitor is not a substitute for responsible adult supervision.
• Keep this User's Guide for future reference.
• Do not place the Baby Unit or cords in the crib or within reach of the baby
(the Unit and cords should be more than 1 meter away).
• Keep the cords out of reach of children.
• Do not cover the Baby Monitor with a towel or blanket.
• Test this monitor and all its functions so that you are familiar with it prior to
actual use.
• Do not use the Baby Monitor in damp areas or close to water.
• Only use the chargers and power adapters provided. Do not use other
chargers or power adapters as this may damage the device and battery pack.
BABY UNIT SET UP & USE:
• Determine a location for the Baby Unit that will provide the best view
of your baby in his/her crib.
•Place the Baby Unit on a flat surface, such as a dresser, bureau, or shelf.
• NEVER place the Baby Unit or cords within the crib.

Safety Instructions 9
• Only insert a battery pack of the same type.
• Do not touch the plug contacts with sharp or metal objects.
• Connect the power adapters to easily accessible electrical outlets.
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to their instructions.
Use only the rechargeable battery pack with rating: 3.7V
2000mAh

10 Getting Started
2. Getting Started
2.1 Connecting the Power Supply for the Baby Unit
1. Plug the DC plug of the power adapter into the power socket on the rear of
the baby (camera) unit and plug the other end of the AC adapter into the
wall socket.
2. The baby unit turns on and the power indicator lights up in blue.
WARNING
Strangulation Hazard. Children have STRANGLED in cords. Keep this cord out
of the reach of children (more than 1 meter or 3 feet away). Do not remove the
tags from the AC Adapters. Only use the AC Adapters provided.
2.2Connecting the power supply of the Parent Unit
A rechargeable battery is already pre-installed inside the parent unit. When
fully charged, you can move the parent unit without losing the link and picture
from the baby (camera) unit. When charging the battery for the first time,
charge for at least 16 hours continuously.
1. Plug the DC plug of the power adapter into the power socket on the side
of the parent unit and plug the other end of the AC adapter into the wall
socket.
Press and hold