Motorola H720 User manual

Quick Start Guide
motorola H720

congratulations
1
congratul ations
Your Motorola H720 headset is designed for quick
connections, clear calls, and lasting comfort.
We’ve crammed all of the main features of your headset
into this handy guide, and in a matter of minutes we’ll
show you just how easy your headset is to use.
So go on, check it out.
more information
on the Web: www.motorola.com/support
Caution: Before using your headset for the first time,
please read the important
Safety, Regulatory & Legal
information at the back of this guide (page 17).

your headset
2
your headset
the important buttons and connectors
Earhook
Charging
Port
Volume
Buttons
Call Button
Indicator
Light
Microphone
Boom

charge it
3
charge it
let’s get you up and running
Note:
Your battery is designed to last the life of your
product. It should only be removed by a recycling facility.
Any attempt to remove or replace your battery will
damage your headset
.

basics
4
basics
a few essentials to get you started
turn it on & off
To turn on your headset, flip the boom to open
(extended) position.
To turn off your headset, flip the boom closed (folded
under the headset body).
wear it
Your headset comes ready for
the right ear. Just open the
boom, flex the earhook and
loop it over your ear.
Make sure the speaker aligns
with your ear canal, and the
microphone is pointing
towards your mouth.
Note: To use your headset with your left ear, see
“change for left ear use” on page 14.

pair & connect
5
pair & connect
connect and go
1 Turn off any Bluetooth devices previously paired with
your headset.
2 Turn on the Bluetooth feature on your phone.
3 Turn on your headset (see page 4 for help).
The indicator light becomes steadily lit in blue.
4 Set your phone to search for Bluetooth devices.
5 Select Motorola H720 from the search results on
your phone.
6 Select Ok or Ye s to pair your headset with your
phone.
Note: If prompted for the passkey, enter 0000 .
When your headset successfully pairs with your phone,
the indicator light rapidly flashes blue and purple.
reconnect
After initially pairing and connecting your phone and
headset, you don’t need to do it again.

pair & connect
6
For daily use, make sure your headset is turned on, and
your phone’s Bluetooth feature is on. Your headset and
phone will connect automatically!
test your connection
1 Turn on your headset and put it on.
2 On your phone, dial a phone number and press the
Call/Send key.
If your phone and headset are successfully connected,
you hear ringing on the headset.

calls
7
calls
it’s good to talk
Note:
Some features are phone/network dependent.
To
answer a call
Press the Call button.
ignore a call Press and hold a Volume
button until you hear a tone.
make a voice dial call Press the Call button and
wait for voice prompt.
redial last call Press and hold the Call
button until you hear two
tones.
mute or unmute a call Press both Volume buttons.
end a call Press the Call button.
answer or reject
second incoming call
Use phone to answer/reject
second call (follow your
phone’s instructions).

talk time
8
talk time
check your chat time
Press and hold both Volume buttons while not on a call.
To save battery power, turn off the headset when not
using it.
If light shows... your talk time is...
red less than 4 hours
purple between 4 to 7.5 hours
blue up to 8 hours

status light
9
status l ight
know your headset
when charging
when operating
If light shows... your headset is...
red charging (battery level less
than 50% charge)
purple charging (battery level more
than 50% charge)
blue fully charged
If light shows... your headset is
three blue flashes powering on/off
steady blue in pairing/connect mode
rapid blue/purple flashes connecting to your phone
quick blue flash receiving or making a call
slow blue pulse on a call
slow blue flash in standby (not on a call)

status light
10
Note:
After 20 minutes on a call or of inactivity, the light
stops flashing to conserve power, but the headset
remains on.
slow red flash idle (not connected to a
phone)
slow purple pulse muting the call
steady red trying to connect to your
phone
quick red flash in a low battery state
If light shows... your headset is

status tones
11
status tones
hear what’s happening
Your headset is... when you hear...
powering on an ascending tone
powering off two descending tones
receiving a call a ring tone
at maximum or minimum
volume
two short tones when
pressing Volume
button
in a low battery state high/low tones
repeated every
60 seconds
out of range of your phone no audio indications;
deteriorating quality
connected to your phone three ascending tones
enabling call mute two rapid ascending
tones
disabling call mute two rapid descending
tones

status tones
12
in call mute status a low tone every
10 seconds
Your headset is... when you hear...

tips & tricks
13
tips & tricks
a few shortcuts
To...
reset your
headset
Caution:
This action erases all
pairing information stored in your
headset.
With the headset on, press and hold
both Volume buttons and Call button
for 10 seconds until the indicator light
is steady blue.

customize
14
customize
make some changes
change for left ear use
Open the boom and earhook
and gently lift top of the
earhook up and off, flip the
headset over, and then hook
bottom of the earhook onto
the lower hinge pin and lift
top of the earhook up and on
to the upper hingepin.
set volume button
Close the boom on your
headset, press and hold the
Volume button you want to
assign as “volume up”, and
then open the boom.
The light flashes blue three
times. When connected, it
flashes blue and purple.
Hinge pinEar hook
Volume keys
Indicator
light

problems?
15
problems?
we’ve got solutions
My headset will not enter pairing mode
Make sure that any devices previously paired with the
headset are turned off. If the indicator light is not steadily
lit in blue, turn off both the other device and headset,
wait 10 seconds, then turn headset back on. Wait for the
indicator light to become steadily lit in blue, indicating the
headset is now in pairing mode.
My phone doesn't find my headset
Make sure the indicator light on your headset is on (lit in
blue) and steady when your phone is searching for
devices.
My headset worked before but now it's not working
Make sure your phone is on and the Bluetooth feature is
turned on in your phone. If the Bluetooth feature was
turned off or was turned on only temporarily, you may
need to restart the Bluetooth feature and pair your phone
and headset again (see “pair & connect” on page 5).

support
16
support
we’re here to help
If you have questions or need assistance, contact us at
1-877-MOTOBLU , or visit us at www.motorola.com/
Bluetoothsupport or www.motorola com/bluetoothconnect.

17
Safety, Regulatory & Legal
Safety Information
European Union Directives
Conformance Statement
EU Conformance
Hereby, Motorola declares that this product is in compliance with:
• The essential requirements and other relevant provisions of
Directive 1999/5/EC
• All other relevant EU Directives
The above gives an example of a typical Product Approval Number.
You can view your product’s Declaration of Conformity (DoC) to Directive 1999/5/EC (to
R&TTE Directive) at
www.motorola.com/rtte . To find your DoC, enter the Product
Approval Number from your product’s label in the “Search” bar on the Web site.
Software Copyright Notice
Software Copyright Notice
Motorola products may include copyrighted Motorola and third-party software stored in
semiconductor memories or other media. Laws in the United States and other countries
preserve for Motorola and third-party software providers certain exclusive rights for
copyrighted software, such as the exclusive rights to distribute or reproduce the
copyrighted software. Accordingly, any copyrighted software contained in Motorola
products may not be modified, reverse-engineered, distributed, or reproduced in any
manner to the extent allowed by law. Furthermore, the purchase of Motorola products
Product
Approval
Number

18
shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any
license under the copyrights, patents, or patent applications of Motorola or any
third-party software provider, except for the normal, non-exclusive, royalty-free license to
use that arises by operation of law in the sale of a product.
Safety & General Information
Safety Information
IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS
INFORMATION BEFORE USING YOUR DEVICE.
Approved Accessories
Use of accessories not approved by Motorola, including but not limited to batteries,
antennas, and convertible covers, may cause your mobile device to exceed RF energy
exposure guidelines and may void your mobile device’s warranty. For a list of approved
Motorola accessories, visit our Web site at:
www.motorola.com
Batteries & Chargers
Your battery, charger, or mobile device may contain symbols, defined as follows:
Use & Safety for Battery-Powered Accessories
• Do not store or use your battery-powered accessory (such as a Bluetooth®
headset or other device) in temperatures below -10°C (14°F) or above 60°C
(140°F).
• Do not recharge your accessory in temperatures below 0°C (32°F) or above 45°C
(113°F).
Symbol Definition
Important safety information follows.
Do not let your battery, charger, or mobile device get wet.
032374o