Motorola H520 User manual

Quick Start Guide
motorola H520

your headset
1
your headset
Take a moment to familiarize yourself with your new
H520 Headset.
Earhook
Charging
Port
Volume
Buttons
Call
Button Power
Switch
Ear
Speaker
Indicator
Light
Microphone

charge it
2
charge it
You’ll need to charge your headset overnight before
using it. Plug the charger into the charging port on your
headset and a wall outlet.
The indicator light is red or purple while the battery is
charging. When the battery is fully charged, the indicator
light turns blue.
Note: Before first time use, leave headset charging
overnight.
Note: Headset is not functional while charging.
Note: Your battery is designed to last the life of your
product. It should only be removed by a recycling facility.
Any attempt to remove or replace your battery will
damage your headphones.

pair & connect
3
pair & connect
pair & connect
Let’s get your headset paired and connected to your
Bluetooth phone.
1 Turn off any Bluetooth devices previously paired with
your headset.
2 Turn on the Bluetooth feature on your phone.
3 Turn on your headset (see page 8 for help).
The indicator light becomes steadily lit in blue.
4 Set your phone to search for Bluetooth devices.
5 Select Motorola H520 from the search results on
your phone.
6 Select Ok or Ye s to pair your headset with your
phone.
Note: When prompted for the passkey, enter 0000 .
The indicator light rapidly flashes blue and purple to
indicate successful pairing and connecting with your
phone.

pair & connect
4
reconnect
After initially pairing and connecting your phone and
headset, you don’t need to do it again.
For daily use, make sure your headset is turned on, and
your phone’s Bluetooth feature is on. Your headset and
phone will connect automatically!
test your connection
1 Place the headset over your ear.
2 On the phone, dial a number and press Call/Send
key.
If your phone and headset are successfully connected,
you hear ringing on the headset.

put it on
5
put it on
You can wear your headset using either an earhook or ear
cushion.
wear with earhook
1 Remove and install all the supplied earhooks to find
a good fit.
2 Your headset comes ready for your right ear. To
change for your left ear:
2
1
From Right Ear To Left Ear

put it on
6
3 Flex the earhook and loop it over your ear.
wear with ear cushion
1 Remove earhook from headset.

put it on
7
2 Try out all the supplied ear cushions to get a good fit.
set volume buttons
1 Turn the headset power off.
2 Press and hold the Volume button you want to
assign as the "volume up" button and slide the Power
switch on. The indicator light flashes blue three
times. When connected, it will flash blue/purple.
Indicator
Light
Volume
Buttons

turn on & off
8
turn on & off
turn on
Slide the Power switch to the on position (no red is
shown under the switch). The indicator light flashes blue
three times, then flashes in blue and purple (if connected
with a device) or is steadily blue (if ready to be paired).
turn off
Slide the Power switch to the off position (red is shown
under switch). The indicator light flashes three times
then turns off.