Motorola H17 - Headset - Monaural User manual

Quick Start Guide
motorola H17

your headset 1
your headse t
Take a moment to familiarize yourself with your
new H17 Headset.
Boom
Charging
Port
Volume Down
Button
Call
Button
Ear
Speaker
Indicator
Light
Microphones
Volume Up
Button
Earhook

charge it2
charge it
You’ll need to charge your headset before using it.
Close the boom and plug the charger into the
charging port on your headset and a wall outlet.
The indicator light is red or yellow while the
battery is charging. When the battery is fully
charged, the indicator light turns green.
Note: Headset is not functional while charging.
Note: Your battery is designed to last the life of
your product. It should only be removed by a
recycling facility. Any attempt to remove or replace
your battery will damage your headset.

pair & connect 3
pair & co nnect
Let’s get your headset paired and connected to
your Bluetooth phone(s).
pair & connect first phone
1 Turn off any Bluetooth devices previously
paired (linked) with your headset.
2 Turn on the Bluetooth feature on your phone.
3 Turn on your headset and put headset on your
ear (see “turn on” on page 7 and “put it on”
on page 8 for help).
The indicator light becomes steadily lit in blue
and you hear
“ready to pair” .
4 Follow voice prompts to connect your phone
to your headset.
Note: When prompted for the passkey, enter
0000 .

pair & connect4
When your headset successfully pairs with your
phone, you hear
“pairing complete” . When
connected, you hear
“phone 1 connected” and
see the indicator light rapidly flash in blue and
purple.
pair & connect second
phone (optional)
1 Turn off first phone and any other Bluetooth
devices previously paired with your headset.
2 Turn your headset off by closing boom.
3 Turn on the Bluetooth feature on your phone.
4 Turn on your headset by opening boom and
put headset on your ear.
The indicator light becomes steadily lit in blue
and you hear
“ready to pair” .

pair & connect 5
5 Follow voice prompts to connect your phone
to your headset.
When your headset successfully pairs with your
phone, you hear
“pairing complete” . When
connected, you hear
“phone 1 connected” and
see the indicator light rapidly flash in blue and
purple.
To connect to both phones, simply turn on the first
phone while the second phone is connected.
When you hear
“phone 2 connected” , your
headset is connected to both phones. The last
paired phone (your second phone) is now your
primary phone (or “phone 1”) for voice dial
functionality.

pair & connect6
test your connection
1 Place the headset over your ear.
2 On one phone, dial a number and press the
Call/Send key. Repeat for the second phone.
If your phones and headset are successfully
connected, you hear ringing on the headset.
For daily use, make sure your headset is turned
on, and your phone’s Bluetooth feature is on. Your
headset and phone will connect automatically.

turn on & off 7
turn on & off
turn on
Open the headset boom. The indicator light
flashes blue three times, then flashes in blue and
purple (if connected with a device) or is steadily
blue (if ready to be paired).
turn off
Close the headset boom. The indicator light
flashes three times then turns off.

put it on8
put it on
You can wear your headset using either an
earhook or ear cushion.
wear with earhook
1 Remove and install all the supplied earhooks
to find a good fit.
2 Your headset comes ready for your right ear.
To change for your left ear:
1
From Right Ear
2
To Left Ear