Motorola H715 - Headset - Over-the-ear User manual

Quick Start Guide
motorola H720

congratulations
1
congratul ations
Your Motorola H720 headset is designed for quick
connections, clear calls, and lasting comfort.
We’ve crammed all of the main features of your headset
into this handy guide, and in a matter of minutes we’ll
show you just how easy your headset is to use.
So go on, check it out.
more information
on the Web: www.motorola.com/support
Caution: Before using your headset for the first time,
please read the important
Safety, Regulatory & Legal
information at the back of this guide (page 17).

your headset
2
your headset
the important buttons and connectors
Earhook
Charging
Port
Volume
Buttons
Call Button
Indicator
Light
Microphone
Boom

charge it
3
charge it
let’s get you up and running
Note:
Your battery is designed to last the life of your
product. It should only be removed by a recycling facility.
Any attempt to remove or replace your battery will
damage your headset
.

basics
4
basics
a few essentials to get you started
turn it on & off
To turn on your headset, flip the boom to open
(extended) position.
To turn off your headset, flip the boom closed (folded
under the headset body).
wear it
Your headset comes ready for
the right ear. Just open the
boom, flex the earhook and
loop it over your ear.
Make sure the speaker aligns
with your ear canal, and the
microphone is pointing
towards your mouth.
Note: To use your headset with your left ear, see
“change for left ear use” on page 14.

pair & connect
5
pair & connect
connect and go
1 Turn off any Bluetooth devices previously paired with
your headset.
2 Turn on the Bluetooth feature on your phone.
3 Turn on your headset (see page 4 for help).
The indicator light becomes steadily lit in blue.
4 Set your phone to search for Bluetooth devices.
5 Select Motorola H720 from the search results on
your phone.
6 Select Ok or Ye s to pair your headset with your
phone.
Note: If prompted for the passkey, enter 0000 .
When your headset successfully pairs with your phone,
the indicator light rapidly flashes blue and purple.
reconnect
After initially pairing and connecting your phone and
headset, you don’t need to do it again.

pair & connect
6
For daily use, make sure your headset is turned on, and
your phone’s Bluetooth feature is on. Your headset and
phone will connect automatically!
test your connection
1 Turn on your headset and put it on.
2 On your phone, dial a phone number and press the
Call/Send key.
If your phone and headset are successfully connected,
you hear ringing on the headset.

calls
7
calls
it’s good to talk
Note:
Some features are phone/network dependent.
To
answer a call
Press the Call button.
ignore a call Press and hold a Volume
button until you hear a tone.
make a voice dial call Press the Call button and
wait for voice prompt.
redial last call Press and hold the Call
button until you hear two
tones.
mute or unmute a call Press both Volume buttons.
end a call Press the Call button.
answer or reject
second incoming call
Use phone to answer/reject
second call (follow your
phone’s instructions).

talk time
8
talk time
check your chat time
Press and hold both Volume buttons while not on a call.
To save battery power, turn off the headset when not
using it.
If light shows... your talk time is...
red less than 4 hours
purple between 4 to 7.5 hours
blue up to 8 hours